Aire Mate102 User manual

1
Waterproof help button
AIRE Mate102 User Manual
Revision: 1.00
Document Title
AIRE Mate102 User manual
Version
1.00
Finale Date
2020-12-26
Status
Released
Document Control ID
Pendant AIRE Mate102

2
Contents
1 Introduction ...................................................................................................................................3
2 Product Overview........................................................................................................................... 3
2.1 Appearance .........................................................................................................................3
2.2 Buttons Interface Description ............................................................................................. 3
2.3 LED Description ...................................................................................................................4
3 Getting Started...............................................................................................................................5
3.1 Parts List ..............................................................................................................................5
3.2 Built-in Battery ....................................................................................................................5
3.3 LS100 Base station...............................................................................................................6
3.4 Power on/Power off ............................................................................................................6
4 Frequency.......................................................................................................................................7
5 Trouble shooting and Safety info ...................................................................................................7
5.1 Trouble shooting .................................................................................................................7
5.2 Safety info............................................................................................................................7

3
1 Introduction
AIRE Mate102 is a 433 Pendant which is designed as accessory for Emergency call
equipment. It works on 433 protocol .It will send 433 signal after the SOS button is
pressed or falls freely. The LS100 device which receives the 433 signal will dial a
emergency call.
2 Product Overview
2.1 Appearance
Figure 1-1
2.2 Buttons Interface Description
Button /USB Interface Description
KEY/interface
Description
SOS Key
short press for 1 second then send 433 data.

4
long press for 10 seconds then send version number and battery voltage
data.
2.3 LED Description
Figure 1-2
There are 1 LED lights in AIRE Mate102 device, the description as following.
Light
Event
State
RED LED
Normal
Dark
Power on
Solid for 4 times mean
battery voltage more then
3.1v
Solid for 3 times mean
battery voltage more then
3v
Solid for 2 times mean
battery voltage more then
2.9v
Solid for 1 times mean
battery voltage less then
2.9v.need to change
battery

5
SOS key was short pressed for 1 second
Solid for 4 times
3 Getting Started
3.1 Parts List
Name
Picture
Remark
LS100 Base
Station
The LTE Base Station. will dial a
emergency call when receiver
the pendant 433 signal.
AIRE Mate102
Pendant
The Pendant will send 433 signal
to the base station
3.2 Built-in Battery
The following items are suggestion for built-in battery usage, please pay more attention.
The device is a pendant ,which is designed to be used with LS100 Base station .
There is a button battery(CR2430) integrated in device. The Pendant will
automaticly power on when the button battery is assembled .

6
3.3 LS100 Base station
The LS100 base station is a LTE/CAT1 emergency call device which could be used to
response to the 433 data sending from the Mate102 Pendant by custom protocol .
The adapter is used for device power on, built-in battery charging , which should be
plugged in power supply socket at any time ( by end user).
Figure 2-1
3.4 Power on/Power off
Figure 2-2
Power on:
The Pendant will automaticly power on when the button battery is assembled .
Power off:
UnPlugged the button battery.

7
Note: the user can change the button battery when the battery is dead.
4 Frequency
433:433.92MHz
5 Trouble shooting and Safety info
5.1 Trouble shooting
5.2 Safety info
The following items are suggestion for safety use, please pay more attention.
Please do not disassemble the device by yourself.
Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even
cause the battery explosion.
Please do not use AIRE Mate102 on the airplane or near medical equipment.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Trouble
Possible Reason
Solution
Unable to power
on AIRE Mate102.
The battery run out or
dead.
change the button battery(CR2430)
Beacon
broadcast data
can not be received
The Mate102 is not in the
<white number list>
Add the SN of Mate102 in the <white
number list> of LS100 by custom
protocol

8
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device must accept any interference received, including interference that may
cause undesired operation.
This radio is designed for and classified as “General population/uncontrolled Use”,
the guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure the safety of all
persons regardless of age or health.
Body and limbs operation; this device was tested for typical body and limbs
operations kept 0mm for body worn. To maintain compliance with RF exposure
requirements, use accessories that maintain a 0mm for body worn.
IC Caution
User manuals for licence-exempt radio apparatus shall contain the following or
equivalent notice in a conspicuous location in the user manual or alternatively on the
device or both.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
（1）this device may not cause interference, and
（2）this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
（1）l'appareil nedoit pas produire de brouillage, et
（2）l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.

9
The device has been tested for typical body-worn operations. The back of the device
kept 0mm from the body with belt-clip.
L'appareil a été testé pour les opérations typiques portées sur le corps. L'arrière de
l'appareil est maintenu à 0 mm du corps avec un clip ceinture.