Airlink101 AWLL5088V2 User manual

Quick Installation Guide
Wireless N 150 Ultra Mini USB Adapter
Model # AWLL5088V2
Install the Wireless USB Adapter
This Quick Installation Guide only provides the basic installation
instructions. For detailed installation instructions on advanced features,
please refer to the User’s Manual on the provided CD.
Macintosh users can find the driver and installation instructions for MAC
10.4, 10.5, 10.6, 10.7 and 10.8 under the MAC folder in the provided CD.
Step 1.1 Insert the USB adapter into an available USB port of your
computer.
Section 1
Package Contents:
•Wireless N Ultra Mini
USB Adapter
•Driver & Utility CD
•Quick Installation Guide
Ver. 1.0

Step 1.2 Click Cancel if you see the Found New Hardware Wizard.
Windows Vista Users:
Windows XP Users:

Step 1.3 Insert the Installation CD in the CD drive.
Step 1.4 The Autorun screen will pop up. Select Install Utility and Driver
from the menu.
Windows 8 / 7 / Vista Users:When you get warning message(s), make
sure that you give permission to continue with the installation of software.

Step 1.5 Click Next and follow the instructions on the window to finish
installation.
Step 1.6 Give Permission to Window to install the driver software.
Windows 7 / Vista Users: Click the Install this driver software anyway.

Windows XP Users: Click Continue Anyway at the Windows Logo Screen.

You will see the following message when it is installing the driver for
Airlink101 Wireless Adapter and the Airlink101 Wireless Monitor.
Step 1.7 Select Yes, I want to restart my computer now. Click Finish to
complete the installation.
Congratulations! You have installed the driver and utility successfully.

Connect to the Wireless Network
Step 2.1 After rebooting the computer, open Airlink101 Wireless Monitor
utility by double clicking on the Airlink101 Wireless Monitor Utility icon on
your desktop.
Step 2.2 Click the Available Network tab of the Wireless Monitor, select
the SSID (Network Name) of the wireless network that you wish to connect
to, and click Add to Profile.
Section 2

Step 2.3 Enter the wireless security key into the Network Key box if the
network you are attempting to connect has wireless security enabled. Click
OK.

Step 2.4 The connection should be now established. Verify that IP
Address,Subnet Mask and Gateway have valid numbers assigned to
them (instead of all 0’s). The Status should be Associated, and there will be
green bars next to Signal Strength and Link Quality.

If you are experiencing problems with the connection (unable to connect,
low signal strength, slow connection speed, not working, unstable wireless
connection) you may want to tune your router’s signal by changing the
channels on the router and/or by adjusting the direction of the antenna(s).
You do not need to change the channel on the Adapter; it will automatically
pick up the new channel after you reboot the router.
Your router has 11 different channels to choose from. Start from channel 1
and work your way up. Each time you change the channel on the router,
make sure that you restart the computer that is connected to the router
before trying to connect again. Keep going through the channels until you
find one that gives you a stable connection.
For instructions on changing channels, refer to the documentation that
comes with the router.
Technical Support
E-mail: [email protected]
Toll Free: 1-888-746-3238
Website: www.airlink101.com
Theoretical maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual
data throughput will vary. Network conditions and environmental factors, including volume of network
traffic, building materials and construction, mix of wireless products used, radio frequency
interference (e.g., cordless telephones and microwaves) as well as network overhead lower actual
data throughput rate. Compatibility with 802.11n devices from other manufactures is not guaranteed.
Specifications are subject to change without notice. Photo of product may not reflect actual content.
All products and trademarks are the property of their respective owners. Copyright ©2013 Airlink101®
Section 3
Troubleshooting