Airlink101 AWLL5088 User manual

Wireless N 150 Ultra Mini USB Adapter
Model #: AWLL5088
Quick Installation Guide for
MAC OS X
Rev. 1.0

2
1. Install Wireless N USB Adapter
This section provides instructions on how to install the Wireless N 150 Ultra Mini USB
Adapter. The driver is installed along with the utility.
Step 1 Insert the USB adapter into an available USB port of the computer. Insert the
provided CD into the CD drive.
Step 2 Explore the CD content, go to MAC folder, then further to the driver folder that
matches to your MAC OS and CPU (Intel or PowerPC) version. Double click on
Installer.pkg to start installing the driver & utility.

3
Step 3 Introduction: The “Install Wireless N USB Adapter Driver” window will pop up.
Click Continue.
Step 4 Read Me: Read the instruction of installation. Click Continue to begin the
installation.

4
Step 5 License: Click Continue.
Step 6 Click Agree to install.

5
Step 7 Installation Type: click Install to perform a standard installation.
Step 8 Enter your password and click OK.

6
Step 9 Click Continue Installation.
Step 10 Install: Wait while the software is being installed.
Step 11 Summary: Click Restart to restart your computer.
Go to Chapter 2 after the computer is restarted.

7
2. Connect to Wireless Network
2.1 Enable the Wireless USB Adapter
This section describes how to enable your wireless USB adapter before you can connect
to a wireless network.
For 10.4/10.5 MAC users:
Step 1 Go to System Preferences > Network, select Network Port Configurations
from Show.

8
Step 2 Check the Ethernet Adaptor (Wireless N USB Adapter) and uncheck
AirPort. Click Apply Now.
For 10.6 MAC users:
After the computer is restarted, you will see this notice popped up on your screen to
inform you that you need to enable the wireless card.

9
Step 1 Go to System Preferences > Network.
You should see Wireless N USB Adapter in the list, if not, please click “+” to add a new
network interface.

10
Step 2 Select Wireless N USB Adapter from the Interface drop-down list and click
Create. Click Apply to save the settings.