Airlink101 AWMB100 User manual

Quick Installation Guide
802.11g Wireless Music Bridge
Model # AWMB100
Ver. 1A

This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Installing Software
Note: The setup should be done from the computer you want to use with the
music bridge.
Step 1 Insert the Utility CD into your CD-ROM drive. When the autorun screen
appears, select Install Utility and Driver from the menu.
Note: If the autorun window does not appear automatically, go to Start -> Run
and type D:\Utility\Setup.exe (where Dis the letter of your CD-ROM drive) and
click OK.
Section 1

Step 2 Click Next at the welcome screen.
Step 3 Click Install at the installation screen.

Running Setup Wizard
Step 1 After the software installation finished, the setup wizard will
automatically appear. Click on the Click Here to Start.
If the wizard does not come up, you can go to Start > All Programs >
Airlink101 Wireless Music Bridge > AWMB100 Setup Wizard.
Section 2

Step 2 Power on the Wireless Music Bridge. Click Next.
Step 3 Connect one end of a networking cable to the computer you plan to use
with the music bridge, then connect the other end to the Ethernet port on the
back of the music bridge. Click Next.

Step 4 Verify if the LEDs LAN and Power and on. Click Next.
Step 5 A list will appear showing your Music Bridge. Select it from the list and
click Next. If nothing appears on the list, make sure that the music bridge is
connected to your computer and properly powered on. Also make sure that
you disable any software firewalls you have installed on your computer.

Step 6 The default username for the music bridge is admin and the default
password is admin. Enter this into the appropriate boxes and click Enter.
Step 7 This screen allows you to change the device name, username, and
password. If you want to change any of this information, enter it into the boxes
and click Next. You can also leave the default settings and click Next.

Step 8 If you are not using the wireless function of the music bridge, click on I
only have a wired network and the configuration is complete. You can now
connect the music bridge to your router and start playing music. If you plan to
use the music bridge wirelessly, go to Step 9.
Step 9 Select your network from the list and click connect.

Step 10 If your network is encrypted, enter the encryption information at the
next screen and click Next.
Step 11 The setup is complete. Click on Finish to save the settings.

Step 12 You can now disconnect the music bridge from your computer and
connect it to your stereo system. The following is a description of the different
audio outputs on the Music Bridge.
Green – Headphones/Stereo/Front Surround – Plug in your stereo speakers
or headphones here. If you are setting up surround sound, use this
connection for your front surround speakers.
Orange – Center channel/Subwoofer – This connection is used for surround
sound. Connect your center channel and subwoofer to this output.
Black – Rear Surround – This connection is used for surround sound. Connect
your rear surround speakers to this connection.
Optical Out – S/PDIF Out – This is an optical digital output for connecting to an
external receiver.
Connecting to the Music Bridge
Step 1 Double click on the Wireless Audio Center icon in the system tray.
If the icon does not appear in the system tray, you can go to Start > All
Programs >Airlink101 Wireless Music Bridge > AWMB100 Audio Center.
Section 3

Step 2 Click the Scan Audio Device button. The software will search for and
find all Music Bridges on the network.

Step 3 Select the music bridge you wish to use from the list and click the
Connect button.

Step 4 Choose the appropriate Playback Buffer Mode for the type of audio
you are playing and click Confirm.
You can now play audio on your computer and it will be sent to the music
bridge.

Technical Support
E-mail: [e-mail]
Toll Free: 1-888-746-3238
Website: www.airlink101.com
* Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual
data throughput will vary. Network conditions and environmental factors, including volume of
network traffic, building materials and construction, mix of wireless products used, radio frequency
interference (e.g., cordless telephones and microwaves) as well as network overhead lower actual
data throughput rate. Specifications are subject to change without notice. All products and
trademarks are the property of their respective owners. Copyright ©2007 Airlink101®
Section 4