Airlink101 AWLH3025 User manual

Ver.1A
Quick InstallationGuide
PackageContent:
•802.11gPCIAdapter
•Driver&UtilityCD
•QuickInstallationGuide
1
Model#AWLH3025
Step1Insertthe PCIadapterintoan availablePCIslotand turnon your
computer.
Step3SelectInstall Utilityfromthe setup menu.
Step4When the welcomescreen appears,click Next.
Section 1
Install UtilitySoftware
Step5Click Nexttoacceptthe defaultdestination foldertoinstall the softwareor
click Browse tomanuallyselectadifferentdestination folder.
Note:If the setup menu doesnotappearautomatically,click Start,Run,type D:
\autorun.exe (whereDisthe letterofyourCD drive)and click OK.
Step2Windowswill detectthe adapterand requestforadriver.Click Cancelto
quitthe wizardand inserttheDriver&UtilityCDintoyourCDdrive.
Note:Besuretopoweroff yourcomputerbeforeinserting the PCIadapter.

Continueonback...
Step7RemovetheDriver&UtilityCDfromyourCDdriveand then click OKto
restartyourcomputer.
Section 2
Install Driver
Step1SelectInstall thesoftwareautomaticallyand click Next.
Step6Click Nextatthe SelectProgramFolderscreen.
ContinueonBack
Note:Inmostcases,Windowswill automaticallyinstall the driverafterthe
computerisrestarted.If the FoundNewHardwareWizardappears,followthe
instructionsbelow.The FoundNewHardwareWizardwill lookdifferentdepending
on youroperating system.Followthe on-screen instructionstocompletethe
installation.
ForWindows98SE and MEusers,you maybe prompted toinsertthe Windows
98SE orMECD during the driverinstallation.BesuretohaveyourWindows98SE
orMECD ready.

Section 3
Section 3
Configuring the PCIAdapter
Step1Uncheck the ExternalConfiguration boxifitischecked and click Apply.
Step2Highlightthe networkdeviceyou wanttoconnecttofromthe devicelist
and click Connect.
Step3Verifythatthe Statusfielddisplays Connectedtonetworkand thatthe
cardhassignalqualityand click OKtoexit.
Toopen the PCIAdapter’s utility,double-click on the Wireless LANUtilityIcon on
the desktop,orgo toStart,(All)Programs,Airlink101,Wireless LAN Utility.Step4Restartthe computer.
Step3ForWindowsXP,click ContinueAnyway atthe WindowsLogo
Compatibilityscreen.
ForWindows2000,clickYesattheDigitalSignaturescreen.
ForWindows98SE orME,insertthe Windows98SE orMECD ifprompted todo
soand click OK.
Step4Click Finish.Restartthe computerifyou areprompted todo so.

E-mail:[e-mail]
TollFree:1-888-746-3238
Web Site:www.airlink101.com
Section 5
TechnicalSupport
Formoreadvanced featuresand additionaldetails,
pleaserefertothe User’s Manualon the provided CD.
Section 4
Troubleshooting
BIf you do notsee yourwireless router/access pointinthe devicelist, resetyour
wireless router/access pointand click on Rescan.
DIf the PCIadapterisconnected tothe networkand hassignalqualitybutcannot
access the Internet, verifythatyou areabletoobtainan IPaddress fromyour
wireless router/accss point.
AIf the utilitycannotbe opened oritreportsthatthe PCIadapterisnotfound,
uninstall the driverand utilityand tryinstalling again.You can alsoverifyifthe
driverisinstalled properlyintheDeviceManager.Forinstructionson howto
access theDeviceManager,pleaserefertothe User’s Manualon the provided CD.
ForWindows2000/XP
Step1GotoStart,Run,type cmdand click OK.
Step2Atthe command prompt, type ipconfig/release and press Enter.
Step3Afterthe IPaddress isreleased,type ipconfig/renewand press
Enter.You shouldgetan IPaddress like192.168.x.y(wherexand yare
unique numbersassigned byyourwireless router/access point).If you
don’tgetan IPaddress,resetthe wirelss router/access pointand then try
ipconfig/renewagain.
CIf you see alock icon nexttothe networkdeviceyou wanttoconnectto,it
meansthatithasencryption enabled.Besuretoinputthe correctencryption key
inthe Privacy tab.Formoreinformation on howtoconfigurethe encryption
settings,pleaserefertothe User’s Manualon the provided CD.
ForWindows98SE/ME
Step1GotoStart,Run,type winipcfgand click OK.
Step2Selectthe cardbusfromthe drop-downmenu and click Release.
Step3Afterthe IPaddress isreleased,click Renew.You shouldgetan
IPaddress like192.168.x.y(wherexand yareunique numbersassigned
byyourwireless router/access point).If you don’tgetan IPaddress,
resetthe wirelss router/access pointand then tryRenewagain.