AirLive CoreNVR 9/16 User manual

CoreNVR 9/16
Network Video Recorder
Quick Installation Guide

Support
You can download the complete guides
and supporting programs from
<http://www.airlivesecurity.com/prod
uct/corenvr9/download>, or scan the
QR code here.
Please consult with the FAQs
<http://www.airlivesecurity.com/prod
uct/corenvr9/faq> before writing to
OvisLink Tech Support Team for further
assistance
For any other question, please read the user manual in
the CD or mail to [email protected] for technical
support.
You can download the complete guides
and supporting programs from
<http://www.airlivesecurity.com/prod
uct/corenvr16/download>, or scan the
QR code here.
Please consult with the FAQs
<http://www.airlivesecurity.com/prod
uct/corenvr16/faq> before writing to
OvisLink Tech Support Team for further
assistance
CoreNVR 9
CoreNVR 16

CoreNVR 9/16 Package Contents
Please check the package contents and contact
your distributor if any part is missing.
CoreNVR 9/16
12V / 4.16A
Power Adapter
User
Manual
CD
Quick
Installation
Guide
HDD
power
cable
X 2
HDD
data
cable
X 2
Screws
from the case
X 5
Silver screws
X 8
Black screws
X 8
HDD cradle
X 4
Declaration of Conformity
We, Manufacturer/Importer
Declare that the product
Network Video Recorder
CoreNVR 9 / 16
is in conformity with
In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive
Clause
Manufacturer/Importer
Description
OvisLink Corp.
5F., NO.6, Lane 130, Min-Chuan Rd.,
Hsin-Tien Dist., New Taipei City 231, Taiwan
■
■
Signature：
Name：Albert Yeh
Y
eh
EN 55022: 2010 (Class B)
EN 55024:2010
■CE marking
Limits and methods of measurement of radio disturbance
characteristics of information technology equipment
Information Technology equipment-Immunity characteristics
And Methods of measurement
■EN 60950-1:2006+
A11:2009+A1:2010+
A12:2011
Safety for information technology equipment including elect
r
Business equipment
CoreNVR 9 / 16 QIG
Network Video Recorder
Installation Step:
1.Screws from the case: 5pcs 2.HDD cradle: 2pcs
5.HDD power cable: 2pcs 4.Black screws: 8pcs
Accessories Check:
1

I/O Interface
Network Video Recorder
CoreNVR 9
PWR HDD LAN REC Event
Alarm CAM Digital In
1234 1234
Digital Out
Status LED
Alarm LED
Digital Input LED
Digital Output LED
USB
I
O
PWR
LAN
USB
AUDIO OUT
MIC IN
RESET
DC 12V
eSATA
VGA
12V D+ D- DI0 DI1 DI2 DI3 GND DO0 DO1 DO2 DO3
Power
Switch
DC In I/O
Interface
e-SATA
Port
Video Output LAN Port USB Audio Out Port
Mic In
Port

HDD Installation Steps
Before to use the CoreNVR 9/CoreNVR 16. The
SATAII Hard Drive should be installed. Please
follow the step 1 ~ 7 to install the Hard Drive.
1. Remove the screws from the box.
01
1

2. Lift up and remove the cover.
HDD Installation Steps
02
2.
1.

3. Assemble HDD cradles with silver screws.
HDD Installation Steps
03
3
3
2

4. Assemble HDD into case with black screws.
HDD Installation Steps
04
4

5. Connect SATA power cable and data cable
between HDD and main board.
HDD Installation Steps
05
5
6

6. Put on the cover back.
HDD Installation Steps
06
2.
1.

HDD Installation Steps
07
7. Assemble all screws back properly.

Start to use CoreNVR
After the Hard Drive is installed. Please connect
the VGA Cable monitor and mouse. Then, turn
on the CoreNVR 9/16’s power and wait until the
system is ready.
CoreNVR
Monitor
VGA Cable
USB Mouse

Login CoreNVR
Login CoreNVR 9/16 system by default
username and password.
Default username: admin
Default password: airlive
Login
Username
Password
admin
Login

Click to enter the setting page.
System Setting

Auto Setting
Note: If cameras has change the user name &
password, please remember to change it
in "Camera Parameter".
Click “Auto Setting” at setting page then press
"OK" without input any information. CoreNVR
9/16 will auto install AirLive cameras which
installed under same network.
Auto Setting
Auto Setting
Auto Setting Filter
Model Name
IP Address
MAC Address
Please enter the filtering rule or keep empty to search all
CancelOK

Motion Detection
Setup Motion parameter in "System Setting"
->"Motion Detection".

Schedule Recording
Default Recording type is "Continues
Recording". Enter "System Setting"
->"Schedule" to change the recording type to
"Motion" to save the Hard disk space.