
FD2
Name: AirPro Home
Model:
Serial Number:
Date of Purchase:
Shop:
Inspector:
Seller:
Quality Certificate/ Warranty Card
power
switch
case
active carbon filter
(optional)
Filtration
Efficiency
Filter Replacement
(operate after shutdown and power off)
· When the air volume is less than 70%,
the HEPA filter needs to be replaced
· Replace the HEPA filter: Open the
cover, take out and replace the HEPA
filter. The HEPA filter should be replaced
after 3,000 hours of use. When installing
the HEPA filter, the arrow direction
should be inward
· Activated carbon is useful for absorbing
toxic chemical fumes or gas, but it is
very thin and easy to saturate. It should
be replaced after 100 ~ 200 hours of
use. For newly renovated room, replace
it every week
Maintenance
· Replace the HEPA filter when needed
· Keep the AirPro away from liquid
· Avoid hitting, dropping or impacting
the AirPro
· Design life: 20 years (the bearing may
need to be replaced during this
period)
Press the power switch to switch levels:
· Level 1 & 2(blue light)
· Level 3 & 4(green light)
· Level 5 & 6(yellow light) :
High air volume (Note the AirPro will be more
audible at this setting)
Troubleshooting
The fan or the circuit board is broken
Button failure
The outlet
grille is stained
The fan
doesn't work
The power plug is loose and
has poor contact
The button is stuck or the wire
is broken
Repair or replace it
The HEPA filter is blocked
Clean with a towel (to prevent
water from entering the fan)
The polluted air flows back (if
the filter is faulty, there is likely
dirt in the fan)
Warranty
· 1-year warranty from the date of purchase.
For problems caused by design, manufac-
turing or transportation from factory, free
repair or replacement will be provided
· If the user is unable to provide a valid proof
of purchase, the warranty period should be
extended by 3 months according to the
production date shown on the unit
· If the AirPro was damaged due to inappro-
priate use or storage, or the sticker was torn
off, there will be a charge for repair