Airtok AP1002 User manual

Questions or Concerns?
Please contact us Mon-Fri, 9:00 am-5:00 pm PST/PDT
at [e-mail]
AIR PURIFIER
Owner’s Manual
AP1002
MODEL:

Congratulations on your purchase of this Airtok air purifier. Please study
this manual carefully to familiarize yourself with the features and functions of
your Airtok air purifier. Inside you will find many helpful hints on how to use
and maintain your Airtok air purifier properly.
Customersupport
If you encounter any issues or have any questions regarding your
new product, feel free to contact our helpful Customer Support Team.
Your satisfaction is our goal!
LIVE CHAT
SUPPORT
www.airtok.com
[email protected]
I

WARNING
Important safety instructions
Read all instructions before using this air purifier
When using an electrical appliance, basic precautions should always be followed,
including the following:
nMake sure the air purifier is plugged into a live 120V AC outlet.
npurifier when not in use.Always turn off and unplug the air
nDisconnect the power supply from your air purifier by unplugging the power cable
before replacing filters and before cleaning.
nDo not use attachments or filters not recommended by Airtok.
npurifier outdoors.Do not use the air
nDo not attempt to remove any part of the unit except the filters.
npurifier.Do not attempt to repair the air
nDo not soak the purifier in water or splash water on it.
nSave these instructions for future reference.
nDo not attempt to plug in the machine when your hands are wet.
nDo not operate the air purifier near an open flame.
npurifier.Do not obstruct the air inlet and air outlet of the air
Important safety instructions II

Important safety instructions
Packing list
Product introduction
Operating guide
Introduction to quick start usage scenarios
How to replace filter
Troubleshooting and solutions
Product specification
Warranty
II
1
2
3
5
7
8
9
9
Customer support I
Contents III

Unpack your Airtok purifier follows
1. Remove the Airtok purifier from the packaging.
2. Check the components received against your packing slip to make sure you have
all the parts.
3. Check the unit and all the components for damage. If the unit or any of the
components show damage from shipping, contact Airtok Technology Inc.
(www.airtok.com).
Host
(1PCS)
Filter
(1PCS)
(loaded into the purifier)
Manual
(1PCS)
Packing list 1

Air Outlet
Air Inlet
Body Filter Cover
Control Panel
Product introduction 2

A B C
A. Remove the cover from the host, take out the filter.
B. Remove the filter bag.
C. Put the filter into the host and reinstall the cover.
Make sure the purifier is plugged
into a live 120V AC outlet!
3

Child
Lock
Press and hold
the button for 3
seconds to
active / deactive
Child Lock.
Fan
Speed
Cycle through
fan speeds:
(low),
(medium),
(high),
(sleep)
Power
On / Off
Timer
Cycle through 1
hour, 2 hours, 4
hours, 8 hours
for timing Power
On / Off.
Filter
Replacement
Press and hold
the button for 3
seconds to switch
off the filter
replacement light
Child Lock Low Fan Speed Medium Fan Speed High Fan Speed Sleep Fan Speed Filter Replacement 1 hour 2 hours 4 hours 8 hours
4
Operating guide

Introduction to quick start usage scenarios 5
What to do if the air is dirty
Fan Speed
How to use child lock
Child Lock
Timer switch
Timer
Turn on the machine and press the "Fan Speed" button to adjust the fan speed.
Timing power-off method: in the power-on state, press the "Timer" button, you can
set power off time of 1, 2, 4, 8 hour(s) from the set time.
Timing power-on method: in the standby mode, press the "Timer" button, you can set
power on time of 1, 2, 4, 8 hour(s) from the set time.
In the power on state, long press the child lock for 3 seconds, the child lock indicator
light is on, and the child lock function is enabled; Press and hold the child lock for 3
seconds, the indicator light of the child lock will go out, and the child lock function will
be cancelled.

Introduction to quick start usage scenarios 6
When to replace filter
The filter life depends on the actual working environment. In the normal service
environment, the filter life is 1,500 hours. After about 1,350 hours (90% of rated
lifecycle) of cumulative operation, the Filter Alarm light will flash to remind you to
purchase and replace the used filter. Replace it with a new one, then press and hold
the Filter Replace button for 3 seconds. And the Filter Alarm light goes out as the
buzzer makes a beep.
Filter Replacement