Airton 409730 User manual
Inserting the batteries
Installing batteries
1. Open the remote control cover " " by
sliding it into the
indicated direction.
2. Place 2 AAA 1.5V batteries inside you
1.ensuring that the position of the poles
1."+" and "-" est correct.
3. Replace the cover of the
1.remote control
User manual
1. Turn on the remote control by pressing the " " button
3. Use " " and " " buttons to adjust the temperature. (The temperature cannot be
3.adjusted under Auto function)
4. Press " " to adjust fan speed: Auto, fan1, fan2, fan3, fan4, fan5,
5. Press SWING to choose the fan angle
Notes:
• Operate the remote control by pointing it at the indoor unit receiver
• To use the remote control, the distance between it and the air conditioner should not exceed 8m
and there should be no obstacles between the two.
•
possible from the air conditioner.
• If the remote control will not be used for a long time, remove the batteries from it.
•s
Remote control
WIFI indicator
Battery indicator
Auto mode indicator
Cool mode indicator
Dehumidification mode indicator
Ventilation mode indicator
Heating mode indicator
Health indicator ECO
indicator
Ventilation speed indicator
QUIET (quiet) indicator
TURBO indicator
Dual-8 nixietube
Time display
Child lock indicator
SLEEP indicator
indicator light I feel indicator
SWING indicator
(air sweep) SWING button
ON/OFF button
button - button +
FAN button
MODE button TURBO button
SLEEP button
(sleep) TIMER button
(Timer)
ECO button
WiFi button
LIGHT button
(light)
HEALTH button
Remote control buttons
When turning on the air conditioner, it emits a sound.
After the ON light is on, you can operate the air conditioner using the remote control.
the air conditioner emits a "beep" sound, which indicates that the signal is good
transmitted to the air conditioner.
ste of air conditioner functions.
on the remote control at the same time)
ON/OFF button
Press this button to turn the air conditioner on or off.
Mode button
Auto Cold Ventilation
• TheAUTO mode:the air conditioner will automatically operate according to the manufacturer's
parameters (factory preset: 23°C, whatever the mode)
In Auto mode, the temperature cannot be adjusted and will not be displayed. Press the fan
button to adjust the ventilation. Press the SWING button to adjust the ventilation angle.
• TheCOOL mode:the air conditioner will operate in Cool mode. Press " " or " " button to adjust
the temperature. Press the Fan button to adjust the ventilation.
Press the SWING button to adjust the ventilation angle.
• TheDRY mode:the air conditioner will operate in fan 1 (fan1). In dehumidification mode, the
fan cannot be adjusted. Press the SWING button to adjust the ventilation angle.
• TheFAN mode:the air conditioner will only ventilate air. Neither hot nor cold. Press the Fan
button to adjust the fan speed. Press the SWING button to adjust the ventilation angle.
• TheHOT mode:the air conditioner will operate in Heat mode. Press " " or " " button to adjust the
temperature. Press the Fan button to adjust the ventilation. Press the SWING button to adjust the
ventilation angle
Notes:
•
air conditioner
• Adjusting the
Auto, fan1, fan2, fan3, fan4, fan5, turbo.
from the : 16-3°C; Fan speed:
Remote control buttons
Button
Press the buttons the
buttons pressed to change the temperature more quickly.
The selected temperature will be displayed on the indoor unit. In
AUTO mode the temperature cannot be adjusted.
In TIMER/TIMER mode, press the buttons
to increase or decrease the temperature by 1°C. Hold
to adjust the time
Button
By pressing this button, you can adjust the fan speed as follows: Auto, Quiet, fan1 ( ), fan 2 ( ), fan3 (
), fan4 ( ) , Fan5( ) , Stepless speed
Ventilation
SELF QUIET
fan1 fan2 fan3
stepless speed fan5 fan4
Notes:
• If Auto mode is activated, the air conditioner will adjust the fan speed automatically
according to the ambient room temperature.
•
• After activating the stepless speed mode, the user can adjust the fan speed with the " " and
" " buttons.
st fan1.
SWING button
Press this button to turn on/off the air sweep and adjust the angle.
TURBO button
Press this button to activate or deactivate the turbo function in cool, heat or fan mode.
When the turbo function is activated, the TURBO icon is displayed on the remote
control
Note: Press the FAN button to exit this function. This function is not used in auto mode or
dehumidifying mode. When the turbo function starts the fan speed is silent automatically.
Remote control buttons
ECO button
The mode of energy efficiency. Can only be used in COOL mode, theair conditionerwill settle
automatically the temperature to 23° (factory setting), and the ventilation to auto, in order to save
energy. The letters ECO are then displayed next to the temperature.
Note: In auto speed mode, the temperature cannot be adjusted.
In cooling mode, the SLEEP function cannot operate at the same time as the ECO function. The ECO
function is valid in cooling mode only. No TURBO with the ECO function activated.
SLEEP button
Automatically adjusts the temperature to make the room more comfortable while you sleep at
night. In fashionAir conditioner, the set temperature will automatically increase by 1ºC every 60
minutes, reaching a total increase of 2ºC during the first 2 hours of operation.
In fashionHeating, the set temperature is gradually lowered by 2ºC during the first 2 hours of
operation. After 10 hours of running in SLEEP mode, the air conditioner will stop automatically.
When the modeSLEEPis activated, the “ ” symbol is displayed next to the temperature on the
indoor unit. The brightness of the digital screen is reduced to provide additional comfort during
the night.
Note: this function is not valid in ventilation mode and AUTO mode. This function is disabled by
default after power-on. This function will be canceled after mode change
TIMER button
While pressing this TIMER button, wait 5
seconds, then press " as you press " " or "
minutes. Hold down "
" then the "H on / H off)" icon will flash on the remote control.
" and "
", you can increase or decrease the time by 30" or " " to
quickly set the time you want.
The “H on / H off) icon will stop flashing
" to set the timer. Each time
Disable Timer
Once the timer is activated, to deactivate it, press "Timer"
Notes:
•
Timer ranges from 0.5~24 hours.
• When the timer is activated, it is visible on the units.
• Timing resets the time to 00:00.
Button Light)
Press this button to turn off the digital screen of the air conditioner. The “press again
to turn on again” icon.
» will disappear,
HEALTH button
The ionizer generates a large amount of negative ions to effectively balance the
amount of positive ions and negative ions in the air, neutralize bacteria and
accelerate dust settling, thereby purifying the air in the room.
When the function is activated, the “ ” icon appears on the remote control.
Note: this function is not valid on all air conditioner models.
WIFI button
OPTION with WIFI module ref. 409729 only
In normal mode, enables or disables remote control of the air conditioner with a smartphone via the
home WIFI network and/or the 3G/4G/5G cellular network.
This button only works after connecting the WIFI module ref.409729 (sold separately). Refer to
the installation and user guide for the WIFI application, supplied with the module.
Remote control buttons
Functions of button combinations
1. Child lock
Press " " and "
When the child lock is activated, the "
the remote control when the child lock is activated, the icon " send
signal to the air conditioner.
" at the same time to activate or deactivate the child lock.
" will flash 3 times without
2. Forced defrost
In heating mode, press FAN and MODE buttons at the same time for 3s to activate or
cancel forced defrost.
3.
In Heat mode, press “Mode” and “Low
temperature heating”.
" at the same time to enable/disable the
“LA” displayed on the remote control is the code of the temperature before turning on/off the low
temperature heating. The low temperature function is similar to “frost protection” operation. The
air conditioner will operate in hot mode at a temperature of 8°C (ideal for second homes, or
during prolonged absences).
When changing from one mode to another mode, the low temperature heating function will
cancel. Turn off and turn on the air conditioner again to reactivate the low temperature
heating function.
In the low temperature heating function, the SLEEP function and low temperature heating
cannot start at the same time. When the low temperature heating function has already started,
while you press the button of SLEEP, the air conditioner will turn off the low temperature
heating mode and enter SLEEP mode. vice versa
Note:
•is set by default to
automatic and cannot be adjusted.
•
TURBO" and "QUIET
at low temperature deactivated, the "TURBO" and "QUIET" modes will not reactivate
automatically.
•st deactivated, the fan speed and the
initial temperature will be activated.
This manual suits for next models
4
Table of contents
