aivituvin AIR 19 User manual

INSTRUCTION
MANUAL
AIR 19
X
www.aivituvin.com

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
P1 P2
P3 P4
P5
02
M3.5x45mm SCREW
M3.5x35mm SCREW
M3.5x50mm SCREW
8PCS+1spare
4PCS+1spare
4PCS+1spare
P6
20PCS+1spare
M3.5x30mm SCREW
4PCS+1spare
M3.0x16mm SCREW
2PCS+1spare
M3.0x10mm SCREW
P7
1PC
P8
Chewing Toy for gift
1PC
Latch

HARDWARE
P9 P10
03
M3.0x16mm SCREW
M4.0x30mm BOLT
2PCS 4PCS+1spare

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
A B C
D E F
G
1PC
1PC 1PC
04
HI
1PC
1PC
1PC
1PC
1PC
Front UP panel
Front down panel Back panel
Left panel
1PC Top panel of pen
Front panel of pen
Right panel
Back panel of pen
Side panel of pen

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
J K L
M N
1PC
1PC 1PC
05
2PCS
1PC Upper hutch tray
Asphalt roofs
Ramp
Roof cap
Metal ramp supporting
O
1PC
Pen tray
P Q
2PCS
4PCS Casters with brakes
Casters without brakes
R
1PC
Folding metal feeder

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
S
1PC
06
Bottom hutch tray

PRODUCT ASSEMBLY
01
02
07
①Attach left panel Part D to step 1 by 2xP2 one side and 4xP2 the
other side.
②Notice there are predrill screws holes to direct.
①Attach front panel Part A, B & back panel Part C to the right panel
Part E by 4xP2 one side and 2xP2 the other side.
②Notice there are predrill screws holes to direct.
P2X
D
C
6
E
P2X
6
B
A

PRODUCT ASSEMBLY
03
04
08
Screw the ramp Part M to the right panel by 4xP5.
①Attach the side pen!
②Screw the Part H to the Part F & Part G by 2xP2 each side.
P5
X4
M
F
G
H
P2
X2
P2
X2

PRODUCT ASSEMBLY
05
06
09
Screw the metal ramp supporting board Part J inside the back
panel of pen Part G by 2xP9.
Attach the pen to the wood hutch by screwing 2xP1 each side.
J
P
9
X2
P
1
X2
P
1
X2

PRODUCT ASSEMBLY
07
08
10
Slide in the Upper tray N and bottom tray S, pen tray O.
①Screw the metal feeder Part R to the back panel by 2xP6.
②Put the chewing toy Part P7 into the cage anywhere you want.
O
P
7
X1
P
6
X2
S
N
R

PRODUCT ASSEMBLY
09
10
11
Attach the top panel of pen Part I by 4xP2 screws.
①Screw the asphalt roofs Part L to the hutch by 8xP3.
②Notice to level up the roof line.
P
2
X4
Lx2
I
P
3
X8

PRODUCT ASSEMBLY
11
12
12
Screw the roof cap Part K to the roof by 4xP4.
①
Screw two brake casters Part Q to the 2 back legs, and one
caster without brake Part P to the middle leg.
②
Attach top panel of pen and side panel of pen with 1xP8 by
4xP10 screws.
P
4
X4
Q
K
P
8
X1
P
10
X4
QP

PRODUCT ASSEMBLY
13
13
Screw the 3 casters without brakes Part P to the front 3 legs.
Px3
LOCKED OPEN
Finish

www.aivituvin.com

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.