aivituvin AIR 31 User manual

INSTRUCTION
MANUAL
AIR 31
www.aivituvin.com

Please retain these instructions for future reference.
NOTICE
days.
tighten screws until the item is completely assembled.
flammable/combustible chemicals.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
60MIN. ASSEMBLY
HARDWARE
P1 P2
02
M3.5x40mm SCREW
M3.5x60mm SCREW
12PCS+1spare 18PCS+1spare
P3 P4
M3.0x16mm SCREW
M3.5x25mm SCREW
2PCS+1spare 30PCS+1spare
P5 P6
M3.0x16mm SCREW
M3.5x35mm SCREW
6PCS+1spare
4PCS+1spare
P7
Spring latch
4PCS
P8
Connect pieces
2PCS

HARDWARE
03
P9
1PC

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
A B C
D E
1PC
1PC
04
1PC
1PC
Back panel of coop
Middle panel of back pen
F
1PC
Side panel of back pen
I K
1PC
1PC
Right panel of pen Ramp
R
1PC
Roof of nest box
CARTON 1/2

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
L
2PCS
05
Perch
Hardware bag Metal rod
CARTON 2/2
G H J
1PC 1PC
1PC
Divider panel
Access door panel Tray

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
1PC 1PC
06
1PC
Side panel of nest box Back panel of nest box
U M
1PC
1PC
Front panel of nest box
Divider panel of nest box
N
1PC
Bottom panel of nest box
O P
1PC
1PC
Coop roof Pen roof
Q
S T
PVC Waterproof Strip

A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
07
Front panel of coop
Middle panel of front pen
Side panel of front pen
A
B
C
Back panel of coop
Middle panel of back pen
Side panel of back pen
Right panel of pen
IF
E
D

PRODUCT ASSEMBLY
01
02
08
①Attach the back Part D to the back Part E by 3xP1.
Ensure all corner line up before screwing together.
②
①Attach the front Part A to the front Part B by 3xP1.
②Ensure all corner line up before screwing together.
P
1
X
3
D
E
P
1
X3
B
A

PRODUCT ASSEMBLY
03
09
Attach the divider panel Part G and access panel Part H to the front
by 4xP2.
P2
X4
H
04
Attach the back panel by 4xP2.
ED
P2
X4
G

PRODUCT ASSEMBLY
05
06
10
Attach the front Part C by 3xP1.
Attach the back Part F by 3xP1.
P1
X3
C
F
P1
X3

PRODUCT ASSEMBLY
07
08
11
①
②
Insert the perches Part L into the slots inside the front and back
panel.
Slide in the tray Part J.
J
Screw the ramp Part
Notice not to block with the sliding door.
K to the access panel Part H by 4xP7.
P7
X4
K
Lx2
①
②

PRODUCT ASSEMBLY
09
10
12
Attach the side pen panel Part I by 6xP2.
Attach Part N & O to the coop from INSIDE by 1xP6 each side.
P2
X6
I
P6
X2
N
O

PRODUCT ASSEMBLY
11
12
13
Connect the nest box to the main coop from INSIDE by 2xP4 each
side.
Attach Part M by 4xP2.
P2
X4
M
P4
X4
P8
X2

PRODUCT ASSEMBLY
13
14
14
Drop in bottom of nest box Part Q.
Slide in divider Part P.
Q
P

PRODUCT ASSEMBLY
15
16
15
Attach the roof Part R by 6xP4.
R
P4
X6
P4
X6
Attach the roof Part S by 4xP6.

PRODUCT ASSEMBLY
17
18
16
Screw 2xP4 to the access panel Part H and then rotate the metal rod
accordingly.
P6
X4
S
T
P9X1
P4X4
P4 X2
Screw the roof hinge by 4xP4，Attach the roof Part T by 4xP6.

PRODUCT ASSEMBLY
19
17
①
②
Attach the spring latch P5 to the door by 2xP4 each.
(Notice the direction of latch)
Attach Part Uby 2xP3
P5
X4
Finish
P4
X8
P3
X2
U

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.