AIVO NETWORKS ANCP3005Q User manual

www.aivonet.com
Professional Wi-Fi CPE Network Bridge
Installation Guide
1
Main Device
Hi-Power
PoE Power Adapter Multi Angle
Metal Bracket
PoE Power Adapter
Mounting Straps
Optional Accessories
Contents
31
1
2
3
4
24
Interface Description
LAN Port (PoE can be turned On/Off)
PoE Power Switch for LAN Port
Reset Button
PoE Enabled WAN Port
Schematic Diagram of Typical Connection
Main Device
Security/IP Camera
PoE/Power Supply
PC
2
3
4

Installation Guide
Installation Guide
with Multi Angle Mounting Bracket
Installation Guide with Screws
Copyright Information
Find two screw keyholes (F),(G) on the bracket
Press the latch button (E) to slide open the cover (C).
Connect the cables accordingly and close the cover.
Statement
Big Cart Corporation Company all rights reserved.
Without our official written permission, no unit or individual shall be copied,
reproduced, transcribed or translated in part or whole book. In any form or by
any means (electronic, mechanical, printing, recording or other possible means)
or for the propagation of goods any commercial, profitable purposes.
AIVO®is the registed trademark of Big Cart Corporation Company in California,
United States. All other trademarks or registed trademarks mentioned in this
document, by respective owners.
Product specifications and information mentioned in this manual are for reference
on subject to updates without notice. Unless there are other special agreed, this
manual is used only as a user guide.
All statements, information, etc. are not consitute anyform of guarantee
After precisely place the screws on the wall,
slide over the keyholes (F), (G) to mount.
1
Slide two mounting straps (A) into
two slots (B) on the mounting bracket
as shown on the picture
Attach the mounting straps (A) arount the pole as shown,
using the plier tight both ends of strap
Press the latch button (E) to slide open the cover (C).
Connect the cables accordingly and close the cover.
Slide two mounting straps (A) into
two slots (B) on the mounting bracket
as shown on the picture.
First, attach Multi Angle Mounting
Bracket to the pole using two
mounting straps as shown on the
picture, and atttach the mounting
straps (A) to the bracket.
Using the plier, tight all the
mounting strap ends.
Press the latch button (E) to slide open the cover (C).
Connect the cables accordingly and close the cover.
6
7
5
2
3
1
2
3
3
2
1