AJA Hi5-12G Operating instructions

Hi5-12G Mini-Converter
12G SDI to HDMI
Version 1.4
Published June 22, 2020
Installation and Operation Guide

Hi5-12G Mini-Converter v1.4 2 www.aja.com
Notices
Trademarks
AJA® and Because it matters.® are registered trademarks of AJA Video Systems, Inc.
for use with most AJA products. AJA™ is a trademark of AJA Video Systems, Inc. for
use with recorder, router, software and camera products. Because it matters.™ is a
trademark of AJA Video Systems, Inc. for use with camera products.
Corvid Ultra®, lo®, Ki Pro®, KONA®, KUMO®, ROI® and T-Tap® are registered trademarks of
AJA Video Systems, Inc.
AJA Control Room™, KiStor™, Science of the Beautiful™, TruScale™, V2Analog™ and
V2Digital™ are trademarks of AJA Video Systems, Inc.
All other trademarks are the property of their respective owners.
Copyright
Copyright © 2020 AJA Video Systems, Inc. All rights reserved. All information in
this manual is subject to change without notice. No part of the document may be
reproduced or transmitted in any form, or by any means, electronic or mechanical,
including photocopying or recording, without the express written permission of AJA
Video Systems, Inc.
Contacting AJA Support
When calling for support, have all information at hand prior to calling. To contact AJA
for sales or support, use any of the following methods:
Telephone [phone]
FAX [phone]
Web https://www.aja.com
Support Email [e-mail]
Sales Email [e-mail]

Hi5-12G Mini-Converter v1.4 3 www.aja.com
Contents
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Contacting AJA Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 1 – Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Default Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
AJA Mini-Cong Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
I/O Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Chapter 2 – Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
USB Control and Setup—Using AJA Mini-Cong . . . . . . . . . . . . . . . . . . . 8
Acquiring AJA Mini-Cong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Installing AJA Mini-Cong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Running AJA Mini-Cong. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operating AJA Mini-Cong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tabbed Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Input Tab Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Output Tab Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HDR Tab Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Audio Tab Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Update Tab Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Software Update Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Info Tab Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Appendix A – Specications . . . . . . . . . . . . . . . . . . . . . . . . 21
Hi5-12G Family Tech Specs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Appendix B – Safety and Compliance . . . . . . . . . . . . . . . . . .26
Warranty and Liability Information . . . . . . . . . . . . . . . . . . . . 35
Limited Warranty on Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Governing Law and Language; Your Rights . . . . . . . . . . . . . . . . . . . . . . 35
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Hi5-12G Mini-Converter v1.4 4 www.aja.com
Chapter 1 – Introduction
Overview
The Hi5-12G converts 12G-SDI to HDMI 2.0, providing an easy to deploy solution
for monitoring professional 4K/UltraHD SDI signals with 4K/UltraHD HDMI 2.0
displays. The Hi5-12G supports a wide range of input video formats and frame
rates with extremely low latency signal conversion and pristine image fidelity.
It features a 12G-SDI single link input with a reclocked SDI loop out for signal
extension to downstream SDI devices.
Three additional Hi5-12G models support fiber connectivity. The Hi5-12G-R
and Hi5-12G-R-ST include an optical input, and the Hi5-12G-TR includes an
optical input and reclocked optical loop output. These models are perfect for
applications where distance is a factor.
The Hi5-12G is a powerful tool for HDR workflows that require local HDR
Infoframe generation to correctly configure a HDR monitor. The free Mini-Config
application program provides an easy to use GUI interface to configure the
Hi5-12G and to display input signal status information.
Default Operation
When you power up the Hi5-12G with its default settings, it will operate with its
default settings, which includes many automatic settings.
The Hi5-12G's Auto-Configure feature automatically identifies the incoming
SDI signal format and converts the signal based on the HDMI output default
configuration parameters.
AJA Mini-Config Control
AJA’s Mini-Config application is available for firmware updates and advanced
configuration. The Mini-Config application provides configuration controls for
Hi5-12G along with real-time input signal status.
With the Mini Config application, you can specify what input signal parameters
you want to use, specify the output signal format, configure HDR settings, audio
settings, and perform software updates.

Hi5-12G Mini-Converter v1.4 5 www.aja.com
Configuration settings made through AJA Mini-Config are stored in the Hi5-12G
unit through subsequent power cycles.
Features
• Convert 12G-SDI to HDMI v2.0b at up to 4K 60p
• Support for 4:4:4/4:2:2/4:2:0 HDMI v2.0b output
• Support for YCbCr and RGB
• HDR support for HDR10 and HLG
• Embedded audio support
• 12G-SDI loop out
• Fiber SFP models available
• Congure via USB port and supplied Mini-Cong software
• Uses 5-16 VDC power (DWP-U-R1 universal power supply included)
• Five year warranty
Block Diagram
Figure 1. Hi5-12G Converter, Simplified Block Diagram
Video
Video
Audio
Audio
Embed
Audio
Analog
Audio Out 1
(RCA)
Analog
Audio Out 2
(RCA)
USB Port
(connect to
PC or Mac) MiniCong Control
D/A
Converter
Optional SFP
Input with
Embedded Audio
HDMI v2.0
Output with
Embedded
Audio
Adjustable
Delay
Video
Processing
SDI Input with
Embedded Audio
SDI Loop
Output
SDI
RCVR
SDI
RCVR
HDMI
XMIT
Optional SFP
Loop Output
Disembed
Audio

Hi5-12G Mini-Converter v1.4 6 www.aja.com
I/O Connections
Figure 2. Hi5-12G Converter Connections
HDMI
Output
Connector
USB
Port
DC Power
Input
SDI Input
SFP Cage
Analog
Audio
Outputs
Power LED
Lock LED
SDI Loop
Output
NOTE: The LED adjacent to the SDI connector indicates by color the detected SDI input
signal. Off is no signal, green is SD-SDI, red is HD-SDI, amber is 3G-SDI, magenta is
6G-SDI, and blue is 12G-SDI.
Installation
NOTE: AJA does not support third-party SFP modules. Use of a non-AJA SFP module will
void the warranty.
Hi5-12G-R ships with a 12G-SDI Fiber LC single channel SFP receiver.
Hi5-12G-R-ST ships with a 12G-SDI Fiber ST single channel SFP receiver.
Hi5-12G-TR ships with a 12G-SDI Fiber LC SFP transceiver.
Installation consists of the following steps:
1. Ensure the Hi5-12G is disconnected from power.
2. Connect video equipment to the converter BNCs.
3. If applicable, connect ber to the 12G-SDI Fiber LC or ST single channel SFP
receiver or transceiver.
CLASS 1
LASER
PRODUCT
Warning! Active ber-optic cables emit radiation invisible to the human eye. Do
not look directly at the end of an active ber-optic cable or the ber connector
on a Hi5-12G-R, Hi5-12G-R-ST or Hi5-12G-TR; these models are Class 1 Laser
Products.

Hi5-12G Mini-Converter v1.4 7 www.aja.com
Figure 3. Hi5-12G to Fiber LC Single Channel SFP Example
NOTE: Fiber optic interconnections can be severely compromised by dirt, oils, or other
contaminants. All dust caps should be replaced on cables and equipment
whenever Hi5-12G converters are disconnected from fiber optic cables.
4. Apply +5VDC power to the converter (AJA power supply included).
5. The Hi5-12G will now run using the default factory settings. If you wish to
alter the factory settings, you’ll need to:
• Install the AJA Mini-Cong software on your computer
• Attach the Hi5-12G via USB
• Make your changes using AJA Mini-Cong setup screens.
This process is detailed in "USB Control and Setup—Using AJA Mini-Config" on page
8.
NOTE: For highest reliability, the mini converter relies on convection cooling instead
of using a built-in fan. Therefore, when installing the unit, mount in a location
where it has access to air for proper cooling. Do not stack the Hi5-12G with other
mini converters.

Hi5-12G Mini-Converter v1.4 8 www.aja.com
Chapter 2 – Operation
USB Control and Setup—Using AJA Mini-Config
Your AJA Mini-Converter can be used right out of the box for some applications
since it is designed to recognize inputs and perform standard actions
automatically by default. However, to use its full capability, you must use AJA’s
Mini-Config software application for PCs and Macs. This same application can be
used to update to new Mini-Converter software released by AJA.
Acquiring AJA Mini-Config
AJA’s Mini-Config application is available for download from the AJA website.
To download the latest AJA Mini-Config package, which includes the AJA Mini-
Config application, Mini-Converter firmware, and documentation, go to:
https://www.aja.com/products/mini-config-software
Select either the Windows or Mac icon to download the desired version.
Mini-Converter Documentation
Included with the AJA Mini-Config package is a complete set of documentation
for all Mini-Converters supported by AJA Mini-Config. A .PDF of the Installation
and Operation Guide for the currently connected Mini-Converter can be accessed
from the AJA Mini-Config UI via the Help/Manual drop-down menu.
Documentation for all AJA Mini-Converters that use AJA Mini-Config can also
be accessed directly in the AJA Mini-Config download package Documentation
folder, and via the Documentation icon available on the Mac installer.
Documentation (and firmware) included with the AJA Mini-Config application
are the versions available at the time of distribution. However, Mini-Converter
software, firmware and documentation are updated regularly, so newer versions
may exist.
To download the latest documentation for an individual Mini-Converter, go to:
https://www.aja.com/family/mini-converters
and navigate to the Support webpage of that Mini-Converter.
Installing AJA Mini-Config
PC Installation
To install AJA Mini-Config on a Windows PC:
1. Download the application from the AJA website (select the Windows icon
on the AJA Mini-Cong Support webpage).
2. Open the AJA_MiniCong.zip le
3. Double-click on the MiniInstaller.msi le.
4. A Setup Wizard will guide you through the installation.

Hi5-12G Mini-Converter v1.4 9 www.aja.com
Figure 4. AJA Mini-Config PC Setup Wizard
5. Click Next to begin. Answer the questions in the subsequent dialogues.
When nished, an AJA Mini-Cong shortcut will be installed on the desktop,
and you will be able to locate the AJA Mini-Cong application in the AJA
folder in the Programs listing.
NOTE: If the AJA Mini-Config application already exists on the PC, a different Setup
Wizard appears.
Figure 5. AJA Mini-Config Setup Wizard, Reinstallation
With this screen you can Repair (reinstall) or Remove (uninstall) AJA Mini-Config
on the PC.
Mac Installation
To install the application on a Mac:
NOTE: Macintosh computers must be Intel-based (G5, G4 and earlier models will not
work with AJA Mini-Config).
1. Download the application from the AJA website (select the Apple icon on
the AJA Mini-Cong Support webpage).
2. Open the AJA_MiniCong folder.
3. Double-click on the AJAMiniCong.dmg le.

Hi5-12G Mini-Converter v1.4 10 www.aja.com
4. Answer the prompt and a utility program will be launched.
Figure 6. AJA Mini-Config Mac Installer
5. To complete the installation drag the “MiniCong.app” icon to the
Applications folder.
Running AJA Mini-Config
Connect the Mini-Converter to the PC or Mac via the supplied USB cable. Connect
the external power supply (supplied) to the Mini-Converter.
PC Startup
To run AJA Mini-Config on a PC, double-click on the AJA Mini-Config icon on your
desktop, or open the AJA folder in the program list and click on the AJA Mini-
Config application located inside the AJA Mini-Config folder.
Mac Startup
To run AJA Mini-Config on a Mac, open the Applications folder and locate the AJA
Mini-Config application. Double-click the application to launch it.
Saving Setups
A File drop down menu on the AJA Mini-Config application bar allows you to
save the current state of the Mini-Converter to a preset file for later recall.