Akura ATLDVD3230W-HD User manual

Customer Help Line: 01422 263313
Opening Hours: Mon-Fri 8am-8pm, Sat 9am-4pm, Sun 11am-4pm
Or visit our website at www.ekey.co.uk
ATLDVD3230W-HD

Safety………………………………………………………………………2
1. Product Features…………………………………………………….4
2. Front View……………………………………………………………. 5
3. Rear View……………………………………………………………..6
4. Remote Control………………………………………………………7
6.OSD Menu…………………………………………………………….. 9
Picture………………………………………………………………10
Sound……………………………………………………………….11
Setup………………………………………………………………..12
Timer………………………………………………………………..14
Function…………………………………………………………….15
7. DVD Operation………………………………………………………22
8. User Help Guide,…………………………………………………… 25
9. Technical Specification……………………………………………..26
Disc Handling and care……………………………………………….27
Mains Plug Wiring…………………………………………………….. 28

- Inputs :- Tuner (RF),VGA, S - Video, Video (CVBS), YPbPr, SCART 1, SCART 2, HDMI.
- Audio Inputs :- Audio L/R, PC Audio, YPbPr Audio L/R
- Sound Standards :- “B/G” (Western Europe), “I” (UK), “D/K” Eastern Europe, “L” France
- Picture Standards : PAL (Uk and most of Europe), SECAM (France)
- Teletext :- 10 Pages
- Stereo / Mono :- NICAM (UK), FM Stereo (Europe).
- Memory :- 200 Channel locations
- Tuning Modes :- Auto search, Manual search
- Programme exchange and edit
- Auto Standby. No signal input.
- Timer operation
- Audio Output :- 2 x 6W
- Power Supply :- 100-240V AC 50/60 Hz

Insert the disc with the mirror side facing towards you
The effective range of the I/R receiver is 5 metres and +/- 30 degrees in the horizontal plane and
20 degrees on the vertical plane.
Button Functions
TV/AV. : Press to select the source. TV, SCART 1, SCART 2, AV, S-Video, YPbPr, VGA, HDMI, DVD.
MENU. : Press to display the MENU OSD. Press again to exit the menu.
P+ / P- : Navigation buttons in Menu Mode. (Up / Down)
Channel Up / Down in TV mode. Press and hold down to scan through the channels
V+ / V- : Navigation buttons in Menu Mode (Left / Right).
Increases and Decreases Sound level in other modes.
POWER.: Turns the TV On or Off.
Power 1
Power Switch and On/Standby Led indicator
Led glows Blue in Standby
2
power on mode

in in
1.AC Power Input. Connect to a 100 – 240V AC 50/60 Hz AC mains supply. This appliance
must be earthed.
2.SWITCH. Turns ON/OFF the AC Power.
3.Phone Out. Headphone output socket.
4.YpbPr/YcbCr Audio L/R Input : Connect to the L/R Audio Output of your DVD player.
5.TV In. Connect your TV aerial lead.
6.SCART 1 : Multi Input connector. DVD or Freeview box input.
7.SCART 2 : Multi Input connector. DVD or VCR input.
8.YPbPr / YcbCr input. : Component signals from a DVD player.
9.Video / L/R Audio input : Composite video signal input, from a VCR, Camera or other source
and audio signals from the same source.
10.S-Video Input. : Alternative High quality video input terminal. Use in conjunction with the L/R
Audio input.
11.PC Audio Input : Audio input from your PC sound terminal.
12.VGA Input. Video input from your PC 15pin mini “D” connector.
13.HDMI Input : Very high quality Video input. Connect to your DVD or HD freeview terminal

30 SLOW: plsy DVD programs at slow speed.
31 REPEAT: play the titlr or chapter once again.
32 PROGRAM: edit the program and play.
33 A-B: select and play the preferable paragraph of
DVD program by pressing this key twice at the
beginning and end of it.
Battery Disposal
When the batteries are exhausted and need replacing,
do NOT break or throw on a fire.
Contact your local waste authority for disposal instructions,
do not throw in the domestic waste.
(PBC)

ENTER ENTER
ENTER
Press ENTER Key To Start.
9
UNITED_KINGDOM