Akva Lyra User manual

Lyra
WITH STANDARD BOX BASE
•The sides of the base are secured to the head- and footend with bench screws.
Position the stabilisers in a way that supports all of the base boards equally.
WITH DRAWER BASE
•When assembling the drawers: see separate instructions
(e.g. Big, Box, drawers on castors, storage base).
•Fit a middle piece at head- and footend with bench screws.
•Cover with a deck plate
(to be fastened on the middle piece from the inside with screws).

FITTING FROM THE BASE AND UPWARDS
•Place the base boards plates on the base frame connect them with the four black legs.
Secure with the fixing paddles.
•The upholstered sides of the frame are connected loosely with the head- and footend
parts by means of angle brackets. Begin with the inner screws.
•When the base boards and upholstered sides have been placed symmetrically, the
screws are fastened tightly one by one.
•Now fasten 2 more angle brackets per side to the side parts and the base boards.
•When installing the rest of the bed: see instructions for HARDSIDE.