Akyga AK-QIR-01A User manual

AK-QIR-01A - user manual
/ak-qir-01a
www.akyga.com
Short description of the product
The product is compatible with the applicable national and European requirements.
What is in the box?
- Adapter AK-QIR-01A
- Short user manual
Symbols explanation:
There is a risk of losing health or life (e.g. by electic shock).
There is a particular danger connected with service.
Important tips and information.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
p. 1
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change
in any way. In the reason of using the power supply for other purposes than those described,
the product may be demaged. The incorrect use may also cause hazard such as short-circuits,
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product
could be share to third partie only with the user manual included.
The Akyga AK-QIR-01A type A adapter allows
The adapter is compatible with all inductive chargers.
charging via induction devices which are not
equipped with QI module.
The product is adapted to supply devices with 5V/0.7A.
EC
BOX
Ecological Solutions
GREEN
adapter QI
The device is intended only for domestic use, indoors.

AK-QIR-01A - user manual
p. 2
Safety Precautions
WARNING! Product heats up during operation. To reduce the risk of burns or overheating the adapter,
do not place it in restricted ventilation area. Also, do not allow the working adapter to touch soft surface
such as pillows, blankets or clothing. The power supply meets the limits on the surface temperatures
available to the user, as defined in the International Standard for Safety of Information Technology
Equipment (IEC 60950).
An electrostatic discharge occurs when two object touch each other, for example, an electric
charge that occurs when user touch metal door handle after walking on a carpet . Discharging
electrostatic charges from fingers or other electrostatic conductors can damage electronic
components. To avoid damaging the smartphone, abstain from touching electrical outlets, wires
and electonic circuits. The user’s contact with electronic components should be kept to a
minimum.
The manufacturer of the product is not responsible for damage or insults caused in effect
of disobey the safety instructions and informations contained in these user manual.
źKeep the product and the packaging out of range of children and animals. The package
includes a foil that child could choke while playing.
źIt is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or
crushing may cause its damage.
źThe product operation in adverse conditions is not allowed. Adverse conditions are primarily:
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high
humidity, surrounds of gases, dusts or flammable and aggressive liquids.
źIf the product has been damaged, does not work properly or has been stored for a long period
of time in bad or unfavorable conditions, safe operation of the device is not possible. It is
essential to stop using the product and to protect it against re-use for security purposes.
źShort-circuiting the current connection is prohibited.
źTake into account the user’s manuals for other devices conected to the adapter.
źIt’s forbidden to modify the adapter. The adapter may be damaged, causing threats to life,
health and property, in the case of modyfications.
źIt's forbidden to charge the smartphone whose battery compartment is damaged.
źConnection of the adapter to smartphone is done by attaching the adapter’s plug to the
corresponding phone’s socket.
źIt’s forbidden to insert the adapter’s plug into socket when the type is not corresponding,
because it can cause damage of smartphone’s charging socket.
źAdapter is designed for smartphones with micro USB socket placed in the middle of the bottom
side.
źIn order to disconnecting adapter from device, please pry the plug in the phone's socket and do
not pull on other part of the adapter.
źAvoid bending the coil, it can damage the adapter.
źIn case of any doubts regarding operation, safety or connection of the product, please contact
the manufacturer or a qualified specialist for this purpose.
źAll maintenance, adjustment and repair work on the product may only be carried out by a
qualified person in a specialist facility.
adapter QI

AK-QIR-01A - user manual
p. 3
Problem
Cause
Solution
A device connected via
adapter qi does not
charging
No mains voltage
źCheck the correct connection of
the adpater to the mains socket
źCheck the mains fuses
Bad phone position
źPlace the phone directly on the
charging surface
źDo not charge your phone close
to intense magnetic field
sources
źPlace the phone with the back
side in the center of the
charging surface
There is a suspicion of a
product defect
źStop using and contact with
seller
Slow charging process
Bad adapter position
źPlace the adapter directly on
the charging surface
źDo not charge your phone close
to intense magnetic field
sources
Too long distance
between the chager and
the phone
źTake off the case
źPlace the phone with the back
side in the center of the
charging surface
źDo not place any objects
between the charginng surface
and the phone while charging
źClean the charging surface and
back side of the phone
Removing the most common problems
adapter QI
Adapter assembly
1. Make sure that the adapter has plug in corresponding type with your device. The socket
must be compatible with adapter’s plug, so that after installing adapter in the device you
can put it on the back of the device.
2. Place the adapter’s plug in device’s socket.
3. Gently tilt the adapter so that it is on the back of the device.
4. Make sure that adapter fits in back cover. If not, you can place adapter in device case.
Type clasification
ź
the screen.
źType B - wider side of USB port is directed down towards
the back cover.
Type A - narrower side of USB port is directed up towards
Type A Type B
Screen Screen
Back cover Back cover

AK-QIR-01A - user manual
p. 4
Technical specfication
Product manufacturer: Ropla Computers sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór
adapter QI
Product code:
Output voltage and amperage:
Maximum power:
Product size:
Temperature:
Power supply connector:
Compilance with standards:
EAN code:
AK-QIR-01A
5V/1A
5 W
105x45x1mm
5-50ºC
Micro USB
CE, FCC
5901720132765
Cleaning the charger
źUse soft and antistatic cloth for cleaning the adapter.
źDo not use abrasive or chemical cleaners.
Disconect the adapter from the device before cleaning.