62
22.3 OS/2 Client Driver ...........................................
62
22.2.3 Memory range exclusion ..................................
62
22.2.2 Socket Numbers ..........................................
62
22.2.1 With Card and Socket Services ............................
62
22.2 DOS Enabler .................................................
61
22.1.4 Older Versions of Card and Socket Services ................
61
22.1.3 Multiple Configuration Attempts ..........................
61
22.1.2 Lack of Available Resources ...............................
61
22.1.1 Generic "SuperClient" Drivers ............................
61
22.1 DOS Client Driver ............................................
61
22 Software Troubleshooting ........................................
60
21 Specifications ....................................................
58
20 DTE Interface Signals ............................................
57
19.3 Null-modem cables ...........................................
56
19.2 MPA-200 and EIA-530 Compatibility .........................
56
19.1 SYNCA (pin 21) ..............................................
55
19 External Connections ............................................
54
18 Receive FIFO Timeout Register ..................................
53
17 Receive Pattern Count Register ...................................
52
16 Receive Pattern Character Register ...............................
51
15 FIFO Control Register ...........................................
50
14 FIFO Status Register .............................................
49
13 Interrupt Status Register .........................................
47
12 Configuration Register ...........................................
45
11 Communications Register ........................................
44
10.7 Receive FIFO timeout ........................................
43
10.6 Receive pattern detection .....................................
42
10.5 Accessing the SCC while FIFOs are enabled ...................
42
10.4.4 Controlling the FIFOs .....................................
42
10.4.3 Reading current FIFO status ..............................
42
10.4.2 Resetting the FIFOs .......................................
41
10.4.1 Interrupt status ...........................................
41
10.4 FIFO status and control ......................................
40
10.3.2 Using channel B for receive ................................
39
10.3.1 Using channel A for both transmit and receive .............
38
10.3 SCC configuration for FIFO operation ........................
38
10.2.2 Receive FIFO .............................................
37
10.2.1 Transmit FIFO ...........................................
37
10.2 Accessing the FIFOs ..........................................
