AL Tech AE-L-HBIS-100 User manual
Specifications
Model Number
AE-L-HBIS-100
AE-L-HBIS-150
AE-L-HBIS-240
DLC #
U-IHB-100
U-IHB-150
U-IHB-240
DLC Partner
Ultron Industries
Input Wattage
100W
150W
240W
Replacement Wattage
400W
600W
1000W
Input Voltage Range
120-277V
Delivered Lumens
11800 lm
17500 lm
25000 lm
Lumen Efficiency
118LM/W
116LM/W
104LM/W
Color Rendering Index (CRI)
70+
Color Temperature (Kelvin)
3000K-5700K
Beam Angle
100° / 60° / 25°
Power Factor
0.99
Frequency
50/60Hz
MAX THD (%)
15
Min. Ambient Temp
-30.0°F / -34.4℃
Max. Ambient Temp
130.0°F / 48.9℃
IP Rating
IP44
Dimming Compatible
3 in 1 dimming function (1˜10Vdc or PWM signal or resistance)
Product Weight
13.4LB / 6.1KG
15.0LB / 6.8KG
15.7LB / 7.1KG
Product Height (100°)
9.1” / 231mm
10.3” / 261mm
12.2” / 311mm
Product Diameter (100°)
14.2” / 361mm
14.2” / 361mm
14.2” / 361mm
Reflector
Aluminum and Acrylic
Materials
Die Cast Aluminum
Finish
Black (Default)
LM70 Life Time
100,000 Hours
UL/cUL
E481056
DesignLights Consortium®
YES
CE
YES
FCC
YES
Warranty
5 Years
!
Dimensions - 100W
85
156
345.42
285.08
127.93
85
156
262.5
104.87
270.43
85
156
231.18
74.79
360.56
25° Reflector
60° Reflector
100° Reflector
!
Dimensions - 150W
115
186
292.5
104.87
270.43
115
186
261.18
74.79
360.56
115
186
315.08
128.2
345.42
25° Reflector
60° Reflector
100° Reflector
!
165
236
342.5
104.87
270.43
165
236
365.08
129.06
345.42
165
236
311.18
74.79
360.56
Dimensions - 240W
25° Reflector
60° Reflector
100° Reflector
!
Note:
Please read this entire manual to fully understand and safely use the luminaire. The products
can be used at the voltage of 100-277V AC, 50/60HZ, suitable for indoor and outdoor, moisture
proof and dust proof. Specifications are subject to change without notice. Please visit
www.altechefficiency.com for the most recent product information. $
Unpacking:
1. Unpack and carefully examine the product.
2. Report any damage and save all packing materials if any part(s) were damaged during
shipping.
3. Do not attempt to use the fixture if it is damaged.
Before You install:
1. Before installing any light fixtures, read and understand all cautions, warnings, instructions
and product labels. Failure to do so can result in injury and/or void the warranty.
2. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT
CONDUCTOR.
3. The product should be installed and operated by a qualified electrician or technician in
accordance with relevant local codes.
4. Risk of electric shock. Ensure that main power source is off when wiring or soldering the
sections of the product.
Maintenance:
1. Disconnect the product from the power supply prior to cleaning.
2. Use a dry or slightly moistened cloth for cleaning.
3. Never use any chemicals or abrasive materials for cleaning.
Installation Instructions:
1. Choose an appropriate and secure installation area.
2. Secure reflector to fixture by aligning the holes on the reflector with the mounting posts and
twist reflector until locked with a click.
3. Hang high bay with the hook and use a chain (not provided) if necessary to adjust the height
of the fixture.
4. Connect the input and ground wires of the fixture to the power supply. Brown is live. Blue
is neutral. Green/Yellow is ground.
5. This fixture is designed for years with minimum care. For optimum performance, periodically
clean the lens with a mild, non abrasive glass cleaner and soft cloth. DO NOT use solvents
or cleaners containing abrasive agents. When cleaning the fixture, make sure you have the
power turned off and do not spray liquid cleaner directly onto the LED, socket or wiring.
This manual suits for next models
5
Table of contents
Other AL Tech Floodlight manuals
