Major tech HLF30CW User manual

HLF30CW
30Watt LED Floodlight
INSTRUCTION MANUAL
Attention: Please read the following instructions carefully to ensure that installation will be
carried out in the right way .These instructions should be properly preserved for future
reference.
Product Overview:
The HLF30CW LED Floodlights are now the most efficient way to light your business, property
or anything! Each outdoor LED floodlight will save you money on both maintenance costs,
replacement costs and energy costs. These high quality IP65 LED based Floodlights have a
30 Watt high power LED Bridgelux Chip capable of producing 2250Lm output. The glass cover
is 4mm strengthen clear glass which is fully waterproof and resistant to all environmental factors.
The lighting source inside is made up from single or multiple high power LED's, which in turn
are directly connected with the aluminium shell. The design ensures very low heat emissions.
The HLF30CW LED Floodlight saves 50% - 70% electricity costs and has a longer lifespan to
that of halogen floodlights. Major Tech eco-friendly product seal of approval - no UV radiation,
RF interference, mercury or air pollution.
Features:
Die-cast aluminium body:
Durable material for lighting purposes.
Resistant to rust and other harmful elements.
Aluminum provides a good heating facility for thermal applications and to ensure a longer
lifespan.
Super bright illumination.
Easy Installaion:
The light is only suitable for fixed mounting.
Maintenance free for many years.

Specifications:
Type
Rated Power:
Glass
Weight
Maximum
projected
area
Dimensions
Remark:
HLF30CW
30W（1x30W）
164x154x4mm
1.7Kg
0.03M2
275x120x340mm
Electric shock protection class:Ⅰ
External light protection class:
IP65
Lamp socket size:LED
Rated voltage:220-240V~ 50Hz
Max height：<3M
Universal for operating position
Bridgelux LED
Lifespan 50 000 Hours
Power source: 100VAC~240VAC
Housing : Die-casting aluminium
IP65
Luminous flux : 2250 lumens
Frequency : 50Hz
Power factor 0.9 work life
Power : 30W
Beam angle: 120°
Max height: 3m
Safety instructions:
1. Before mounting and maintenance please make sure that the electrical supply has been
switched off to avoid electric shock.
2. The light must be earthed.
3. The power cord must be a VDE-certified H05RN-F 3G 1.0 mm ² cable waterproof.
4. Replace the cracked protection glass immediately and use only original parts to substitute.
5. Connect the yellow/green conductor of the connection supply cable with the connection
block, marked with the earthings symbol.Mount the other wires into the connector
block .see mark N and L
6. Before the maintenance work takes place, the power should be switched off. The
maintaining should be done only by a qualified electrician.
Installation:
1. The light is only suitable for fixed mounting.
2. Fix the appliance by 2 screws of minimum 6 mm and maximum 7 mm diameter.
3. Connect the yellow/green conductor of the connection supply cable with the connection
block, marked with the earthings symbol.Mount the other wires into the connector
block .see mark N and L.

A: Lamp Cover
B: LED
C: Lamp body
D: adjusting knob
E: Bracket
Maintenance:
CAUTION: The light source of lamp can’t be replaced, please replace a whole new lamp if the
light source broken.
MAJOR TECH (PTY) LTD
Head Office:
Cnr Rover & Jaguar Roads, Rustivia Ext 3,
Elandsfontein.
P O Box 888 Isando, 1600 South Africa
Tel: [phone] Fax: [phone]
E-mail: [email protected]
Website: www.major-tech.com
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased. They can take
this product for environmental safe recycling.
A
B
D
E
C