Alamo ST10 Stingray User manual

ST15 & ST10 Stingray
© 2004 Alamo Group Inc.
COMPLETE PARTS
LISTING
ALAMO INDUSTRIAL
1502 E. Walnut
Seguin, Texas 78155
830-372-3551
2004 Edition Rev 01-09
Archive Book
Part No.
02980337
ARCHIVE BOOK
15 ' Flex Wing - 4 Gearbox Model
S/N ST15-C31200557203 (Jan. 2002 )
to
S/N ST15-Current

Alamo Industrial (Terrain King)
15 foot Flex Wing Mowers
Model - 3 Gearbox 15 ft. / Flex Wing Mowers
Production Date Serial Number
Start.........to.... End Start s/n...............to..... End s/n
530................ May 1968.......... Nov. 1973* TK530-07195..................TK530-21446*
CP180........... Dec. 1973.........Mar. 1976* CP180-31188................. CP180-34724*
X-3................ Apr. 1975.......... Apr. 1978* X-3-33388.......................X-3-36782*
TK15.............May 1978.......... Sep. 1982* TK15-36783....................TK15-39979*
TK15HD........Oct. 1982..........May 1987* TK15HD-39980...............TK15HD-46051*
A315..............Mar. 1990..........Sep. 1990* A315-01001.................... A315-10080*
* End of Production for this Model
Model - 4 Gearbox 15 ft. Flex Wing Mowers
Production Date Serial Number
Start.........to.... End Start s/n...............to..... End s/n
TK15-IV........ Mar. 1985..........May. 1987* TK15-IV-42840............... TK15-IV-46051*
AG15-IV........ Jun. 1987..........Mar. 2002* AG15-IV-01001............... AG15-IV-04643*
A415..............Jun. 1990.......... Dec. 2002* A415-01001.................... A415-14000*
ST15.............Jan 2002........... Current ST15-C31200557203..... ST15-Current
* End of Production for this Model
Archive Manual Part Numbers
TK530........................ 02980262 TK15-IV.........................00761652
CP180........................ 02980263 AG15-IV........................ 00761652
X-3.............................. 02980264 A315.............................. 02980317
TK15.......................... 02980265 A415.............................. 02980316
TK 15HD.....................02980265 ST15..............................02980337

Index - 3
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
ITEM PAGE NO.
AXLE ASY.
Center Axle:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 26
Wing Axle
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 18, 19
BLADE CARRIERS & BLADES:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 48, 49, 50
CHAIN GUARDS:
Front:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 64 thru 69
Rear:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 64 thru 69
COUNTER WEIGHT: (10 foot Model)
ST15-C31300557203 (Jan. 2002) to ST15-Current.................................... 20
CONTROL / LEVEL LIFT ROD:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 27
DECK COMPONENT:
Center Section:
ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003).... 14, 15
ST15-C31200790311 (Nov. 2003) to ST15-Current....................................16, 17
Wing Section:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 18, 19
Skirt Assembly ST10:
ST15-C31300557203 (Jan. 2002) to ST15-Current.................................... 20, 21
DRIVELINE ASY:
PTO, Cat 5 C/V:
ST15-C31200557203 (Jan. 2002) to ST15-Current................................... 32, 33
INTERMEDIATE:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 35
WING:
ST15-C31200557203 (Jan. 2002) to ST15-Currentt................................... 34
SLIP CLUTCH:
Intermediate Driveline & Wing Driveleine:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 36, 37
GEARBOX ASY:
Divider:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 38, 39
Center:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 40, 41
Right & Right Wing:
ST15-C31200557203 (Jan. 2002) to ST15-Current.................................... 42 thru 45
INDEX - ST15 & ST10

ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
Index - 4
ITEM PAGE NO.
GEARBOX SHIELDS
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 46, 47
HITCH ASY (OPTIONAL PRECISION HITCH)
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 24
HYDRAULICS
Schematic - Axle Lift Cylinders
ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003)..... 52, 53
ST15-C31200790311 (Nov. 2003) to ST15-Current.....................................54, 55
Schematic - Wing Lift & Fold Cylinders
ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003)..... 58
ST15-C31200790311 (Nov. 2003) to ST15-Current.....................................59
Schematic - Control Valve:
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 62
Wing Lift Cyl:
ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003)..... 60
ST15-C31200790311 (Nov. 2003) to ST15-Current.....................................61
Axle Lift Cyl:
ST15-C31200557203 (Jan. 2002) to ST15-C31200789311 (Oct. 2003)..... 56
ST15-C31200790311 (Nov. 2003) to ST15-Current.....................................57
Attachments:
Axle Lift:
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 18, 63
Wing Lift:
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 18, 63
Valve Mnt:
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 62
INDEX / INTRODUCTION
Index ............................................................................................................ 3 thru 5
Introduction................................................................................................... 6 & 13
PARKING JACK
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 25
SAFETY CHAIN
Safety Chain................................................................................................. 70
SAFETY SECTION
Safety Section...............................................................................................7 thru 12
SKID SHOES
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 16 thru 20
TONGUE:
Tongue:
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 22, 23
Precision Hitch: (Optional)
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 24
INDEX - ST15 & ST10

Index - 5
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
ITEM PAGE NO.
TIRE, WHEEL & HUBS
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 28 thru 31
TRANSPORT LIGHT ASY:
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 71
WINCH & STAND
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 51
WHEEL HUB
ST15-C31200557203 (Jan. 2002) to ST15-Current..................................... 28 thru 31
INDEX - ST15 & ST10
ST15 (C312) & ST10 (C313)
12 Digit Serial Number Break Down
C
3
1
2
0
0
5
5
7
2
0
3
1 st. thru 4 th. digits designate model (C312 = ST15 and C313 = ST10)
5 th. digit designates decade years (example 0=2000 thru 2009 or 1=2010 thru
2019 or 2=2020 thru 2029 & etc.)
6 th. thru 9 th. digit means it was the 557 th unit built that year
10 th. digit is year of the decade (example 2=2002 or 3=2003 & etc.)
11th. thru 12 th. digit is month of the year (example 03=March or 04=April & etc.)
Summary: This serial number means, C312 = ST15, 0= 1 st. decade of century,
0557 = Five hundred and fifty seventh unit built this year, 2= the year of the decade
(2002), 03 = the month of the year (March)
Serial Number Identification Codes

ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
Index - 6
The ST15 / ST10 Archive Book is a complete listing of Parts from the first Unit to the
Present. The Production Dates, Serial Numbers, Special Notes and Descriptions are
furnished to help find Replacement Parts. Dimension (if listed) are for Identification of
Parts and MAY NOT be to Manufacturing Specification, Your measurements may vary
some from dimensions listed. Some Parts may be changed and be different than parts
listed. Some Modification may be required when replacing older parts. Match S/N's listed
in this Book with the S/N's listed at the top of each Parts Page. See Index page for serial
number code break down. The ST15 S/N will start with prefix C312 and ST10 prefix is
C313, the first 4 digits of the 12 digit S/N designates the model.
Dec. 2002
to
Current
S/N ST15-C31200557203
to
S/N ST15-Current
FRAME
ASSEMBLY
Beginning Production Date
Ending Production Date Componets Listed This Page
PAGE EXAMPLE
For ordering parts the following instructions are offered to help eliminate delay
1. The purchase order must include the Name, Address (Ship to Street Address) of the
Person / Organization ordering the parts. Who / How Parts should be Billed. Name
and Phone Number of a Contact Person at your end.
2. The Purchase Order must list clearly the correct Part Number of Part. Quantity of
each Part wanted, Complete and correct Description of each Part. All Parts will be
shipped as requested depending on availability and/or reasonability of request
carrier / method.
3. Alamo Industrial reserves the right to substitute parts where applicable and change
prices Without prior notice. Alamo Industrial also reserves the right to Ship Parts the
most Reasonable way as determined by Alamo Industrial.
4. Some Parts are unlisted items, which are special production items not normally
stocked or built for a limited / special use, These parts may be subject to special
handling or cannot be priced till ordered. Always Request a quotation for such Parts
before sending a purchase order.
ST15 & ST10
ARCHIVE BOOK
INTRODUCTION
Beginning S/N
Ending S/N

SAFETY
SECTION
Safety Section - 7
© 2004 Alamo Group Inc.

Safety Section - 8
SAFETY
© 2004 Alamo Group Inc.
Read these assembly instructions through completely and understand them
before proceeding with the assembly of the equipement.
A safe and careful operator is the best operator. Safety is of primary importance to the manufac-
turer and should be to the owner/operator. Most accidents can be avoided by being aware of
your equipment, your surroundings, and observing certain precautions. The first section of this
manual includes a list of Safety Messages that, if followed, will help protect the operator and
bystanders from injury or death. Read and understand these Safety Messages before assem-
bling, operating or servicing this Implement. This equipment should only be operated by those
persons who have read the Manual, who are responsible and trained, and who know how to do
so safely and responsibly.
The Safety Alert Symbol combined with a Signal Word, as seen below, is used throughout this
manual and on decals which are attached to the equipment. The Safety Alert Symbol means:
“ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” The Symbol and Signal
Word are intended to warn the owner/operator of impending hazards and the degree of possible
injury faced when operating this equipment..
CAUTION! The lowest level of Safety Message; warns of possible injury. Decals
located on the Equipment with this Signal Word are Black and Yellow.
WARNING! Serious injury or possible death! Decals are Black and Orange.
DANGER! Imminent death/critical injury. Decals are Red and White. (SG-1)
Practice all usual and customary safe working precautions and
above all---remember safety is up to YOU. Only YOU can prevent
serious injury or death from unsafe practices.

Safety Section - 9
SAFETY
© 2004Alamo Group Inc.
Si no lee Ingles, pida ayuda a alguien que si lo lea para que le
traduzca las medidas de seguridad. (SG-3)
PELIGRO!
!LEA EL INSTRUCTIVO!
READ, UNDERSTAND, and FOLLOW the following Safety
Messages. Serious injury or death may occur unless care is
taken to follow the warnings and instructions stated in the Safety
Messages. Always use good common sense to avoid hazards.
(SG-2)
!
Si no lee Ingles, pida ayuda a alguien que
si lo lea para que le traduzca las medidas
de seguridad. (SG-3)
PELIGRO! LEA EL
INSTRUCTIVO!
WARNING! Perform service, repairs and lubrication according to the maintenance section. Ensure the unit
is properly lubricated as specified in the lubrication schedule and all bolts and nuts are properly
torqued. Failure to properly service, repair and maintain this Implement in good operating
condition could cause component failure and possible serious injury or even death. (SG-35)
WARNING! Operate this Equipment only with a Tractor equipped with an
approved roll-over-protective system (ROPS). Always wear seat
belts. Serious injury or even death could result from falling off the
tractor--particularly during a turnover when the operator could be
pinned under the ROPS. (SG-7)
DANGER! Never work under the Implement, the framework, or any lifted compo-
nent unless the Implement is securely supported or blocked up to
prevent sudden or inadvertent falling which could cause serious injury
or even death. (SG-14)
WARNING! Use caution and wear protective gloves when handling sharp objects such as blades, knives,
and other cutting edges. Be alert to worn component surfaces which have sharp edges. Sharp
surfaces can inflict severe laceration injuries if proper hand protection is not worn. (SG-37)

Safety Section - 10
SAFETY
© 2004 Alamo Group Inc.
Many of the parts are heavy and require lifting assistance. Do not try to
lift the heavy parts by yourself. Get help from another employee or from
an overhead crane.
WARNING! The operator and all support personnel should wear hard hats,
safety shoes, safety glasses, and proper hearing protection at all
times for protection from injury including injury from items thrown by
the equipment. (SG-16)
Always wear safety shoes with steel toes when working on this equipment.
It is recommended that the safety shoes have metatarsal guards.
When welding use Welding hood with the appropriate OSHA required
protective lens, welding apron, and welding gloves.
DANGER! Always disconnect the wire leads from the mower valve solenoid before
performing service on the Tractor or Mower. Use caution when working
on the Tractor or Mower. Tractor engine must be stopped before
working on Mower or Tractor. The Mower Blades could inadvertently be
turned on without warning and cause immediate dismemberment, injury
or death. (SBM-12)
DANGER! Never run the tractor engine in a closed building or without adequate
ventilation. The exhaust fumes can be hazardous to your health.
(SG-23)
WARNING!
WARNING!
WARNING!

Safety Section - 11
SAFETY
© 2004Alamo Group Inc.
Before starting the mower make sure the area is clear and the floor has
been swept. The mower blade can throw objects several hundred feet.
Thrown objects could damge property or cause severe bodily injuries even
death.
WARNING! Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local traffic
regulations. (SG-6)
DANGER! Start tractor only when properly seated in the Tractor seat. Starting a
tractor in gear can result in injury or death. Read the Tractor operators
manual for proper starting instructions. (SG-13)
DANGER! Do not operate this Equipment with hydraulic oil leaking. Oil is
expensive and its presence could present a hazard. Do not check for
leaks with your hand! Use a piece of heavy paper or cardboard. High-
pressure oil streams from breaks in the line could penetrate the skin
and cause tissue damage including gangrene. If oil does penetrate the
skin, have the injury treated immediately by a physician knowledge-
able and skilled in this procedure. (SG-15)
WARNING! Always read carefully and comply fully with the manufacturers instruc-
tions when handling oil, solvents, cleansers, and any other chemical
agent. (SG-22)
DANGER! All Safety Shields, Guards and Safety devices including
(but not limited to) - the Deflectors, Chain Guards, Steel
Guards, Gearbox Shields, PTO integral shields , and
Retractable Door Shields should be used and main-
tained in good working condition. All safety devices
should be inspected carefully at least daily for missing
or broken components. Missing, broken, or worn items
must be replaced at once to reduce the possibility of
injury or death from thrown objects, entanglement, or
blade contact. (SGM-3)
DANGER!

Safety Section - 12
SAFETY
© 2004 Alamo Group Inc.
DANGER! NEVER use drugs or alcohol immediately before or while operating the
Tractor and Implement. Drugs and alcohol will affect an operator’s
alertness and coordination and therefore affect the operator’s ability to
operate the equipment safely. Before operating the Tractor or Imple-
ment, an operator on prescription or over-the-counter medication must
consult a medical professional regarding any side effects of the medi-
cation that would hinder their ability to operate the Equipment safely.
NEVER knowingly allow anyone to operate this equipment when their
alertness or coordination is impaired. Serious injury or death to the
operator or others could result if the operator is under the influence of
drugs or alcohol. (SG-27)
DANGER! Operate the Tractor and/or Implement controls only while properly seated
in the Tractor seat with the seat belt securely fastened around you.
Inadvertent movement of the Tractor or Implement may cause serious
injury or death. (SG-29)
WARNING! Engine Exhaust, some of its constituents, and certain vehicle
components contain or emit chemicals known to the state of
California to cause cancer and birth defects or other
reproductive harm. (SG-30)
WARNING! Battery posts, terminals and related accessories contain lead
and lead compounds, chemicals known to the state of Califor-
nia to cause cancer and birth defects or other reproductive
harm. Wash Hands after handling. (SG-31)
WARNING! Use extreme caution when getting onto the Implement to perform repairs, maintenance and
when removing accumulated material. Only stand on solid flat surfaces to ensure good footing.
Use a ladder or raised stand to access high spots which cannot be reached from gound level.
Slipping and falling can cause serious injury or death. (SG-33)
WARNING! Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hose
connections. Relieve hydraulic pressure before performing maintenance or repairs. Use
gloves and eye protection when servicing hot components. Contact with a hot surface or fluid
can cause serious injury from burns or scalding. (SG-34)
WARNING! Avoid contact with hot surfaces of the engine or muffler. Use gloves and eye protection when
servicing hot components. Contact with a hot surface or fluid can cause serious injury from
burns or scalding. (SG-38)

13
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
ST15 Archive Book
This is a complete listing of Parts from the first Unit to the Present (or end of model
production). The Production Dates, Serial Numbers, Special Notes and Descriptions are
furnished to help find Replacement Parts. Dimension (if listed) are for Identification of Parts
and MAY NOT be to Manufacturing Specification, Your measurements may vary some
from dimensions listed. Some Parts may be changed and be different than parts listed.
Some Modification may be required when replacing older parts. Match S/N' and Ship
Dates if available.
ID The ST15 (Jan 2002 to Current)
The ST10 & ST15 was built from Jan. 2002 (s/n ST15-C31200557203) to Current (s/nST-
Current) .
Serial Numbers:
See The Index Pages for an explanation on of how to identify your unit by the 12 digit serial number
code, The Serial number code shows manufacturing production date of your unit.
Gearboxes:
The best way to ID the ST10 & ST15 (Stingray Model) is by the Gearboxes, This is a 4 Gearbox
Model (Divider and Center Blade Gearbox two separate gearboxes). The Divider gearbox has a 1-3/
8" X 21 Spline Output Shafts. The Blade Gearbox (Center & Wings) has a long section of the Housing
that protrudes below where it bolts to the deck. The Blade Gearbox has a Dip-Stick type top Plug. The
Blade Carrier Retaining Nut used a Cone Shaped Washer which no other model has to this time.
Blade Carriers:
The Blade Carriers are a Round Shaped Pan Weldment. The Blade Bolts are a Shouldered Blade
Bolt, and a bushing is used with the Blade Bolt. This was not the only 4 gearbox model that had a Shoulder
Blade Bolt but is the only model to use a bushing with the Shoulder Bolt.
Driveline Options:
There were no Driveline size options, There was a Cat IV (4) Wing Drivelines and a Cat V (5)
PTO Driveline used on this model. Some parts will not interchange between drivelines. See Part numbers
for interchangeable parts.
Axles:
The axles are Independent from center to wings. The type Hydraulic Axle lift is a Phasing (Slave)
Cylinder system, the Hydraulic lift of the mower is done by using 3 hydraulic Cylinders mounted one in
the center and one on each wing. The Cylinders are connected together into one Hydraulic flow in series.
ST15 / ST10
Flex Wing Rotary
ARCHIVE BOOK

14
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
DECK COMPONENTS
Center Section
ST15 / ST10
Jan. 2002
to
Oct. 2003
ST15-C31200557203
to
ST15-C31200789311
37,38,39
32,33
21,24,25,
26,40,41
9,21,22
20,23
23,36
10,12,13,14,15,16
10,11,12,13,14,15,
17
18 19 25
27
28,29,30
9
2,5,6
3,4,31
34,35
2,4,5,6
4,7,8

15
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
DECK COMPONENTS
Center Section
ST15 / ST10
Item Part No. Qty. Description
1 02978500 1 Center Section Asy
2 02978501 2 Hose Organizer
3 00755082 6 Bolt
4 000944 16 Lock Nut
5 00008300 2 Bolt
6 15B1200 2 Flat Washer
7 02978502 2 Skid Mount Asy
8 02975147 4 Bolt
9 02978503 2 Wing Lift Spacer Plate
10 02891800 2 Bolt
11 02978504 1 Retainer Pin, Long Center Pin
12 15B800 3 Flat Washer
13 00001800 3 Lock Nut
14 15B1600 3 Flat Washer
15 01408S3Roll Pin
16 02978505 2 Retainer Pin, Outer Pins
17 02959332 2 Bolt
18 02978506 1 Cylinder Lug Adj. Asy.
19 02978507 1 Spacer Plate
02978508 1 Spacer Plate
20 02978509 2 Wing Lock Pin,
21 02957042 4 Bolt
22 15B600 4 Flat Washer
23 02978510 3 Lynch Pin
24 02978511 1 Slow Moving Vehicle Sign Stand
25 00015800 8 Lock Nut
26 00753642 2 Bolt
27 00037200 2 Lock Nut
28 02978512 1 Bolt Access Cover Plate
29 00012101 2 Lock Washer
30 10180500 2 Bolt
31 02978513 1 Gearbox Asy, CW, 540 RPM
02978971 1 Gearbox Asy, CW, 1000 RPM
32 10180500 2 Bolt
33 02978915 1 SMV Sign
34 02978514 1 Gearbox Asy, Divider, 540 RPM
02978968 1 Gearbox Asy, Divider,1000 RPM
35 00753753 4 Bolt
36 02978515 1 Transport Lock Pin
37 02978516 1 Operator / Parts Manual Box
38 00024100 2 Flat Washer
39 10058000 2 Bolt
40 02962363 2 Lock Nut
41 02978638 1 Hose Clamp
Jan. 2002
to
Oct. 2003
ST15-C31200557203
to
ST15-C31200789311

16
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
DECK COMPONENTS
Center Section
ST15 / ST10
Nov. 2003
to
Current
ST15-C31200790311
to
ST15-Current
37,38,39
32,33
21,24,25,
26,40,41
9,21,22
20,23
23,36
10,12,13,14,15,16
10,11,12,13,14,15,
17
18 19 25
27
28,29,30
9
2,5,6
3,4,31
34,35
2,4,5,6
4,7,8

17
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
DECK COMPONENTS
Center Section
ST15 / ST10
Item Part No. Qty. Description
1 02978500 1 Center Section Asy
2 02978501 2 Hose Organizer
3 00755082 6 Bolt
4 000944 16 Lock Nut
5 00008300 2 Bolt
6 15B1200 2 Flat Washer
7 02978502 2 Skid Mount Asy
8 02975147 4 Bolt
9 02978503 2 Wing Lift Spacer Plate
10 02891800 2 Bolt
11 02978504 1 Retainer Pin, Long Center Pin
12 15B800 3 Flat Washer
13 00001800 3 Lock Nut
14 15B1600 3 Flat Washer
15 01408S3Roll Pin
16 02978505 2 Retainer Pin, Outer Pins
17 03200369 2 Bolt, (Light Truck Tire)
02959332 2 Bolt, (Laminated & Aircraft Tire)
18 02978506 1 Cylinder Lug Adj. Asy.
19 02978507 1 Spacer Plate, (Light Truck Tire)
02978508 1 Spacer Plate, (Laminated & Aircraft Tire)
20 02978509 2 Wing Lock Pin,
21 02957042 4 Bolt
22 15B600 4 Flat Washer
23 02978510 3 Lynch Pin
24 02980471 1 Slow Moving Vehicle Sign Stand
25 00015800 8 Lock Nut
26 00753642 2 Bolt
27 00037200 2 Lock Nut
28 02978512 1 Bolt Access Cover Plate
29 00012101 2 Lock Washer
30 10180500 2 Bolt
31 02978513 1 Gearbox Asy, CW, 540 RPM
02978971 1 Gearbox Asy, CW, 1000 RPM
32 10180500 2 Bolt
33 03200347 1 SMV Sign
34 02978514 1 Gearbox Asy, Divider, 540 RPM
02978968 1 Gearbox Asy, Divider,1000 RPM
35 00753753 4 Bolt
36 02978515 1 Transport Lock Pin
37 02978516 1 Operator / Parts Manual Box
38 00024100 2 Flat Washer
39 10058000 2 Bolt
40 02962363 2 Lock Nut
41 02978638 1 Hose Clamp
Nov. 2003
to
Current
ST15-C31200790311
to
ST15-Current

18
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
DECK COMPONENTS
Wing Section
ST15 / ST10
Jan. 2002
to
Current
ST15-C31200557203
to
ST15-Current
1
2
3
45
2
32
6
9
2
7
7
8
89
10
2
11 12 13 20 14
16
17
18 38
37
17
21 22
19
32
35
18
33
17
28
28
8
8
31
30
15
7
36
24 27
29
25
26
23
36

19
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
DECK COMPONENTS
Wing Section
ST15 / ST10
Jan. 2002
to
Current
ST15-C31200557203
to
ST15-Current
Item Part No. Part No. Qty. Description
R-Wing L-Wing
1 02978517 ------------- 1 Wing Asy, R-Wing (Shown)
------------- 02978532 1 Wing Asy, L-Wing (Not Shown
2 02978518 02978518 4 Hinge Pin
3 02978519 02978519 2 Hinge Spacer Tube
4 00749017 00749017 8 Lock Nut
5 10121000 10121000 8 Bolt
6 02978520 02978520 1 Hinge Spacer Tube
7 01408S01408S 5 Roll Pin
8 15B1600 15B1600 6 Flat washer
9 02978521 02978521 2 Pin
10 02978522 02978522 2 Floating lug
11 000944 000944 6 Lock Nut
12 00755082 00755082 6 Bolt
13 02978523 ------------- 1 Gearbox, CCW R-Wing
------------ 02978533 1 Gearbox, CW L-Wing
14 2A381312 2A381312 3 Plow Bolt
16 02978525 02978525 1 Skid Shoe, L or R Wing
17 00001800 00001800 10 Lock Nut
18 15B800 15B800 10 Flat Washer
19 02978795 02978795 1 Lock Washer
20 331212C 331212C 2 Half Nut
21 02978526 02978526 1 Retainer Pin
22 02892000 02892000 1 Bolt
23 02978527 02978527 1 Clevis Pin
24 02959332 02959332 1 Bolt
25 02978528 02978528 1 Wheel Suspension Plate, Standard
26 00751035 00751035 1 Rubber Sandwich
27 02978529 02978529 1 Wing Wheel Standard Asy.
28 00037200 00037200 5 Lock Nut
29 03200269 03200269 2 Bolt
30 00755153 00755153 1 Cotter Pin
31 001291 001291 1 Grease Nipple, Self tap
32 02978512 02978512 1 Bolt Access Cover Plate
33 00012101 00012101 2 Lock Washer
34 10180500 10180500 2 Bolt
35 02978530 02978530 1 Wing Adj. Assy.
36 00011800 00011800 2 Bolt
37 02776600 02776600 6 Bolt
38 02978531 ------------- 1 Adjustable Side Mount, R-Wing
------------- 02978534 1 Adjustable Side Mount, L-Wing
Note: Qty Shown above is for one Wing, double qty of parts for both wings w/ the exception
of items 1, 13 & 38 which must be used on a specific wing.

20
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
SKIRT ASY
ST10
Jan. 2002
to
Current
ST15-C31200557203
to
ST15-Current
21,23
17,18,20,22
16
3,7,15
1,3,7,11
19
10 5
14
1,3,7
8
2,3,7
4
12
9
13