AlazarTech ATS9626 User manual

ATS9626 User Manual
16 Bit, 250 MS
/s
Waveform Digitizer for PCI Express Bus
Written for Hardware Version 1.2
June 2013 Edition
Part Number: 9360-USR-1

ATS9626 User Manual i
Copyright © 2010 - 2013 AlazarTech. All rights reserved.
AlazarTech Contact Information
AlazarTech, Inc.
6600 Trans-Canada Highway
Suite 310
Pointe-Claire, QC
Canada H9R 4S2
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Web site: www.alazartech.com
To comment on the documentation for ATS9626, send e-mail to
[email protected].
Information required when contacting AlazarTech for technical support:
Owned by: ___________________________
Serial Number: ___________________________
Purchase Date: ___________________________
Purchased From: ___________________________
Software Driver Version: ___________________________
SDK Version: ___________________________
AlazarDSO Version: ___________________________
Operating System: ___________________________

ii ATS9626 User Manual
Important Information
Warranty
The ATS9626 is warranted against defects in materials and workmanship for a period of
one year from the date of shipment, as evidenced by receipts or other documentation.
AlazarTech, Inc. will, at its option, repair or replace equipment that proves to be
defective during the warranty period. This warranty includes parts and labor.
The media on which you receive AlazarTech, Inc. software are warranted not to fail to
execute programming instructions, due to defects in materials and workmanship, for a
period of 90 days from date of shipment, as evidenced by receipts or other
documentation. AlazarTech, Inc. will, at its option, repair or replace software media that
do not execute programming instructions if AlazarTech, Inc. receives notice of such
defects during the warranty period. AlazarTech, Inc. does not warrant that the operation
of the software shall be uninterrupted or error free.
A Return Material Authorization (RMA) number must be obtained from the factory and
clearly marked on the outside of the package before any equipment will be accepted for
warranty work. AlazarTech, Inc. will pay the shipping costs of returning to the owner
parts that are covered by warranty.
AlazarTech, Inc. believes that the information in this document is accurate. The
document has been carefully reviewed for technical accuracy. In the event that
technical or typographical errors exist, AlazarTech, Inc. reserves the right to make
changes to subsequent editions of this document without prior notice to holders of this
edition. AlazarTech, Inc. may also make improvements and/or changes in the products
and/or programs described in this document at any time. The reader should consult
AlazarTech, Inc. if errors are suspected. In no event shall AlazarTech, Inc. be liable for
any damages arising out of or related to this document or the information contained in
it. The latest user manual can be found on the AlazarTech, Inc. web page at
www.alazartech.com/support/downloads.htm.
EXCEPT AS SPECIFIED HEREIN, ALAZARTECH, INC. MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CUSTOMER’S
RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE ON THE
PART OF ALAZARTECH, INC. SHALL BE LIMITED TO THE AMOUNT
THERETOFORE PAID BY THE CUSTOMER. ALAZARTECH, INC. WILL NOT BE
LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF
PRODUCTS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED
OF THE POSSIBILITY THEREOF. This limitation of the liability of AlazarTech, Inc. will
apply regardless of the form of action, whether in contract or tort, including negligence.
Any action against AlazarTech, Inc. must be brought within one year after the cause of
action accrues. AlazarTech, Inc. shall not be liable for any delay in performance due to
causes beyond its reasonable control. The warranty provided herein does not cover
damages, defects, malfunctions, or service failures caused by owner’s failure to follow
the AlazarTech, Inc. installation, operation, or maintenance instructions; owner’s
modification of the product; owner’s abuse, misuse, or negligent acts; and power failure
or surges, fire, flood, accident, actions of third parties, or other events outside
reasonable control.
Copyright
Under the copyright laws, this publication may not be reproduced or transmitted in any
form, electronic or mechanical, including photocopying, recording, storing in an
information retrieval system, or translating, in whole or in part, without the prior written
consent of AlazarTech, Inc.
Trademarks
AlazarTech, Inc.™, AlazarTech™, alazartech.com™, ATS™, ATS9626™,
AlazarDSO™, are trademarks of AlazarTech, Inc. Product and company names
mentioned herein are trademarks or trade names of their respective companies.

ATS9626 User Manual iii
Warning Regarding Use of AlazarTech Products
1. ALAZARTECH, INC. PRODUCTS ARE NOT DESIGNED WITH COMPONENTS
AND TESTING FOR A LEVEL OF RELIABILITY SUITABLE FOR USE IN OR IN
CONNECTION WITH SURGICAL IMPLANTS OR AS CRITICAL COMPONENTS
IN ANY LIFE SUPPORT SYSTEMS WHOSE FAILURE TO PERFORM CAN
REASONABLY BE EXPECTED TO CAUSE SIGNIFICANT INJURY TO A
HUMAN.
2. IN ANY APPLICATION, INCLUDING THE ABOVE, RELIABILITY OF
OPERATION OF THE SOFTWARE PRODUCTS CAN BE IMPAIRED BY
ADVERSE FACTORS, INCLUDING BUT NOT LIMITED TO FLUCTUATIONS IN
ELECTRICAL POWER SUPPLY, COMPUTER HARDWARE MALFUNCTIONS,
COMPUTER OPERATING SYSTEM SOFTWARE FITNESS, FITNESS OF
COMPILERS AND DEVELOPMENT SOFTWARE USED TO DEVELOP AN
APPLICATION, INSTALLATION ERRORS, SOFTWARE AND HARDWARE
COMPATIBILITY PROBLEMS, MALFUNCTIONS OR FAILURES OF
ELECTRONIC MONITORING OR CONTROL DEVICES, TRANSIENT FAILURES
OF ELECTRONIC SYSTEMS (HARDWARE AND/OR SOFTWARE),
UNANTICIPATED USES OR MISUSES, OR ERRORS ON THE PART OF THE
USER OR APPLICATIONS DESIGNER (ADVERSE FACTORS SUCH AS THESE
ARE HEREAFTER COLLECTIVELY TERMED “SYSTEM FAILURES”). ANY
APPLICATION WHERE A SYSTEM FAILURE WOULD CREATE A RISK OF
HARM TO PROPERTY OR PERSONS (INCLUDING THE RISK OF BODILY
INJURY AND DEATH) SHOULD NOT BE RELIANT SOLELY UPON ONE FORM
OF ELECTRONIC SYSTEM DUE TO THE RISK OF SYSTEM FAILURE. TO
AVOID DAMAGE, INJURY, OR DEATH, THE USER OR APPLICATION
DESIGNER MUST TAKE REASONABLY PRUDENT STEPS TO PROTECT
AGAINST SYSTEM FAILURES, INCLUDING BUT NOT LIMITED TO BACK-UP
OR SHUT DOWN MECHANISMS. BECAUSE EACH END-USER SYSTEM IS
CUSTOMIZED AND DIFFERS FROM ALAZARTECH, INC.’s TESTING
PLATFORMS AND BECAUSE A USER OR APPLICATION DESIGNER MAY
USE ALAZARTECH, INC. PRODUCTS IN COMBINATION WITH OTHER
PRODUCTS IN A MANNER NOT EVALUATED OR CONTEMPLATED BY
ALAZARTECH, INC., THE USER OR APPLICATION DESIGNER IS
ULTIMATELY RESPONSIBLE FOR VERIFYING AND VALIDATING THE
SUITABILITY OF ALAZARTECH INC. PRODUCTS WHENEVER ALAZARTECH,
INC. PRODUCTS ARE INCORPORATED IN A SYSTEM OR APPLICATION,
INCLUDING, WITHOUT LIMITATION, THE APPROPRIATE DESIGN, PROCESS
AND SAFETY LEVEL OF SUCH SYSTEM OR APPLICATION.

iv ATS9626 User Manual
Compliance
FCC/Canada Radio Frequency Interference Compliance*
Determining FCC Class
The Federal Communications Commission (FCC) has rules to protect wireless
communications from interference. The FCC places digital electronics into two classes.
These classes are known as Class A (for use in industrial-commercial locations only) or
Class B (for use in residential or commercial locations). Depending on where it is
operated, this product could be subject to restrictions in the FCC rules. (In Canada, the
Department of communications (DOC), of Industry Canada, regulates wireless
interference in much the same way.)
Digital electronics emit weak signals during normal operation that can affect radio,
television, or other wireless products. By examining the product you purchased, you can
determine the FCC Class and therefore which of the two FCC/DOC Warnings apply in
the following sections. (Some products may not be labeled at all for FCC; if so, the
reader should then assume these are Class A devices.)
FCC Class A products only display a simple warning statement of one paragraph in
length regarding interference and undesired operation. Most of our products are FCC
Class A. The FCC rules have restrictions regarding the locations where FCC Class A
products can be operated.
FCC Class B products display either a FCC ID code, starting with the letters EXN, or
the FCC Class B compliance mark.
Consult the FCC web site http://www.fcc.gov for more information.
FCC/DOC Warnings
This equipment generates and uses radio frequency energy and, if not installed and
used in strict accordance with the instructions in this manual and the CE Mark
Declaration of Conformity**, may cause interference to radio and television reception.
Classification requirements are the same for the Federal Communications Commission
(FCC) and the Canadian Department of Communications (DOC).
Changes or modifications not expressly approved by AlazarTech Inc. could void the
user’s authority to operate the equipment under the FCC Rules.
Class A
Federal Communications Commission
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Canadian Department of Communications
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations. Cet appareil numérique de la classe A respecte
toutes les exigences du Règlement sur le matériel brouilleur du Canada.

ATS9626 User Manual v
Compliance to EU Directives
Readers in the European Union (EU) must refer to the Manufacturer's Declaration of
Conformity (DoC) for information** pertaining to the CE Mark compliance scheme. The
Manufacturer includes a DoC for most every hardware product except for those bought
for OEMs, if also available from an original manufacturer that also markets in the EU, or
where compliance is not required as for electrically benign apparatus or cables.
To obtain the DoC for this product, click Declaration of Conformity at
http://www.alazartech.com/support/documents.htm. This web page lists all DoCs by
product family. Select the appropriate product to download or read the DoC.
* Certain exemptions may apply in the USA, see FCC Rules §15.103 Exempted
devices, and §15.105(c). Also available in sections of CFR 47.
** The CE Mark Declaration of Conformity will contain important supplementary
information and instructions for the user or installer.
Environmental Compliance
Alazar Technologies Inc., hereby certifies that this product is RoHS compliant, as
defined by Directive 2002/95/EC of the European Parliament and of the Council of 27
January 2003 on the restriction of the use of certain hazardous substances in electrical
and electronic equipment. All manufacturing has been done using RoHS-compliant
components and lead-free soldering.

vi ATS9626 User Manual
Table of Contents
Important Information...................................................................ii
Compliance .................................................................................iv
Table of Contents........................................................................vi
CHAPTER 1 - INTRODUCTION..................................................1
About Your ATS9626 ...................................................................2
Acquiring Data with Your ATS9626..............................................4
Optional Upgrades .......................................................................8
CHAPTER 2 - INSTALLATION AND CONFIGURATION...........9
What You Need to Get Started ..................................................10
Unpacking ..................................................................................11
Installing the ATS9626...............................................................12
Installing the ATS9626 in a Linux System..................................21
Compiling the ATS9626 Linux Driver.........................................22
Updating ATS9626 Driver ..........................................................23
CHAPTER 3 - HARDWARE OVERVIEW..................................25
Input Connectors........................................................................27
Signal Connections ....................................................................28
Analog Input...............................................................................30
Amplifier Bypass Option.............. Error! Bookmark not defined.
Calibration ..................................................................................34
Master/Slave Operation............... Error! Bookmark not defined.
Optional External Clock..............................................................35
Streaming Using Data FIFO.......................................................36
APPENDIX A - SPECIFICATIONS............................................48
APPENDIX B - BENCHMARKS..................................................1

ATS9626 User Manual 1
Chapter 1 - Introduction
This chapter describes the ATS9626 and lists additional
equipment.

2 ATS9626 User Manual
About Your ATS9626
Thank you for your purchase of an ATS9626. This PCI
Express (PCIe x8) based waveform digitizer has the following
features:
Two 16-bit resolution analog input channels
Real-time sampling rate of 250 MS/s to 1 KS/s with
internal clock and 250 MS/s to 50 MS/s with external
clock
User programmable Stratix III FPGA
On-board acquisition memory buffer of
2 Gigasamples (4 Gigabytes)
Streaming of acquired data to PC host memory at
1.6 GB/s (exact rate is motherboard dependent)
DC coupled inputs (for ac coupling, see ATS9625)
50input impedance
DC ~150 MHz analog input bandwidth
Half-length PCI Express (8 lane) card
External Trigger LVTTL input
Two front panel Auxiliary I/Os
Pre-trigger and Post-Trigger Capture with Multiple
Record capability
Multi-board Master/Slave systems for up to 8
simultaneous input channels
NIST traceable calibration
Dual DMA engines for best latency protection against
Windows and Linux operating systems
Fully asynchronous software driver for fastest DMA
with least CPU overhead

ATS9626 User Manual 3
All ATS9626 digitizers follow industry-standard Plug and Play
specifications on all platforms and offer seamless integration
with compliant systems.
If your application requires more than two channels for data
acquisition, you can synchronize multiple digitizers on all
platforms using a Master/Slave SyncBoard 9626.
Detailed specifications of the ATS9626 digitizers are listed in
Appendix A, Specifications.

4 ATS9626 User Manual
Acquiring Data with Your ATS9626
You can acquire data either programmatically by writing an
application for your ATS9626 or interactively with the
AlazarDSO software.
If you want to integrate the ATS9626 in your test and
measurement or embedded OEM application, you can
program the digitizer using C/C++, MATLAB or LabVIEW for
Windows or C and LabVIEW for Linux operating systems.
Windows operating systems supported are Windows
8, 7, Windows Vista and Windows XP, Windows Both
32 bit and 64 bit operating systems.
Note that Windows 98SE and Windows 2000 are not
supported.
For programming in C/C++ or MATLAB, you must purchase
the ATS-SDK software development kit that comes with
sample programs and a reference manual describing the API.
For programming in LabVIEW, you must purchase the ATS-
VI virtual instrument library that comes with a high-level,
easy-to-use VI that makes integrating the ATS9626 into your
own system very simple.
AlazarTech offers ATS9626 binary drivers for CentOS
6.3 x86_64 with kernel 2.6.32-279.5.2.el6.x86_64. These
drivers are also 100% compatible with RHEL 6.3. Source
code example programs are also provided, which
demonstrate how to acquire data programmatically using a C
compiler. If customers want to use ATS9626 in any Linux
distribution other than the one listed above, they must
purchase a license for Linux driver source code and compile
the driver on the target operating system.

ATS9626 User Manual 5
Interactively Controlling your ATS9626 with AlazarDSO
The AlazarDSO Soft Front Panel allows you to interactively
control your ATS9626 as you would a desktop oscilloscope.
To launch the Scope Soft Front Panel, select
Start » Programs » AlazarTech » AlazarDSO
The following screen will be displayed. If you connect the
input to a signal generator and click on Start button, you
should see the signal on the screen.
AlazarDSO has been designed to be very intuitive and uses a
user interface similar to most of today’s digital oscilloscopes.

6 ATS9626 User Manual
ATS-SDK API
The ATS-SDK API is used for programming the ATS9626 in
C/C++ or Visual BASIC. It provides the exact same API that
is used for writing AlazarDSO software. To help you get
started, ATS-SDK comes with examples you can use or
modify.

ATS9626 User Manual 7
ATS-VI LabVIEW VI
ATS-VI allows you to integrate the ATS9626 into your own
LabVIEW program. A high level VI is supplied that requires
very few controls to get started.
ATS-Linux for ATS9626
The ATS-Linux for ATS9626 can be used for programming
the ATS9626 under Linux operating system. A source code
driver is supplied that has been compiled for CentOS 6.3
(Kernel 2.6) running on an i386 platform. Sample program is
supplied in C. The API is identical to the Windows API.
Note that you will need to sign a Non-Disclosure Agreement
with AlazarTech in order for the source code of the drivers to
be shared with you.

8 ATS9626 User Manual
Optional Upgrades
AlazarTech offers the following upgrades and accessories for
use with your ATS9626 digitizer:
ATS9626: Master/Slave SyncBoard 2 position
ATS9626: Master/Slave SyncBoard 4 position
ATS9626: High Capacity FPGA Upgrade
ATS9626: ±200mV Input Range Upgrade
ATS962x: Coprocessor FPGA Development Kit
AlazarDSO – Stream To Disk Module
AlazarDSO – Plug-In Development Kit

ATS9626 User Manual 9
Chapter 2 - Installation
and Configuration
This chapter describes how to unpack, install, and configure
your ATS9626.

10 ATS9626 User Manual
What You Need to Get Started
To set up and use your ATS9626, you will need the following:
One or more ATS9626 digitizers
ATS9626 Installation Software on USB Disk
For Master/Slave operation only:
SyncBoard of appropriate width

ATS9626 User Manual 11
Unpacking
Your digitizer is shipped in an antistatic clamshell package to
prevent electrostatic damage to the digitizer. Electrostatic
discharge can damage several components on the digitizer.
To avoid such damage in handling the digitizer, take the
following precautions:
Ground yourself via a grounding strap or by holding a
grounded object.
Touch the antistatic package to a metal part of your
computer chassis before removing the digitizer from
the package.
Remove the digitizer from the package and inspect
the digitizer for loose components or any other sign
of damage. Notify AlazarTech if the digitizer appears
damaged in any way. Do not install a damaged
digitizer into your computer.
Never touch the exposed pins of the connectors.

12 ATS9626 User Manual
Installing the ATS9626
There are four main steps involved in installation:
1. Physically install the digitizer(s) and SyncBoard, if
any, in your computer.
2. Install ATS9626 software driver
3. Install AlazarDSO software that allows you to setup
the hardware, acquire signals and view and archive
them
4. Optionally, install the ATS-SDK software
development kit or ATS-VI LabVIEW VI, which
enables you to programmatically control the
ATS9626
The following paragraphs will guide you through this process
in a step-by-step manner.