Alberici TimeboxB ACS User manual

ACTIVE ONE ALBERICI Manual
Rev. 1.00 Page 1
TimeboxB ACS Pay-for-time box with RFID reader (2-Service Lines)
Operator’s manual
Rev. 1.05
User Manual

2
NOTA
This manual has been prepared with the utmost care. Nevertheless, it is not
possible to assure at any time the exact correspondence of the descriptions to the product
features. Alberici SpA shall not be held liable by the User for any damage, losses, or third party
claims arising from any uses of the manual or of the product.

TIMEBOX ACS ALBERICI
Rev. 1.05
Manual
Page
3
CONTENTS
User Manual....................................................................................................................................................... 1
1. Package content........................................................................................................................................ 5
2. Product description.................................................................................................................................... 5
3. Size ........................................................................................................................................................... 6
4. Electrical connections................................................................................................................................ 6
5. Operation................................................................................................................................................... 8
6. Operation..................................................................................................................................................11
7. Product disposal.......................................................................................................................................12
8. Terms of Guarantee .................................................................................................................................12
9. Customer Service.....................................................................................................................................12
STORICO REVISIONI
Revisione n°
Data
Modifica
Note
Creazione 1.00
05.10.12
Creazione
Rev. 1.02
04.04.14
ActiveOne, scheda MKII e conversione a ccTalk
Rev. 1.03
22.07.15
Cambio frontespizio
Rev. 1.04
09.010.18
Versione con ACS integrato nel frontalino
Rev. 1.05
26.04.22
Scheda ActiveOne ARM

Please read carefully this handbook, to obtain the most from your TIMEBOX B ACS Unit
125 mm x 116mm x 390 mm
5,50 Kgs.
230V o 24Vca o +24Vcc o 12Vcc (must be specified when placing the order) 8 Amps
+10°C ÷ +50°C (humidity 10% ÷ 70% non-condensed)
Wall-mount, indoor or outdoor (sheltered against water, sprays, direct sunlight
AL66V cctalk
Active One, with 2x16 blue LCD display
Alberici Servo MKII
ACS Alberici RFID MIFARE® Key reader, cctalk
Dear Customer,
we would like to thank you and congratulate for your choice. We trust that you will appreciate the quality and performace of the
Alberici TIMEBOX B ACS. The data exchanged under MIFARE® encryption are then processed through cctalk protocol, the
serial communication mode that provides security and precision.
Please pay due attention to the following warnings:
IMPORTANTE NOTICE REGARDING USER’S SAFETY AND PROPER OPERATION OF THIS UNIT
IMPORTANTE NOTICE REGARDING DANGERS ARISING FROM RISK OF ELECTRICAL DISCHARGE
GENERAL NOTE
1. Package content
The set includes:
1. Timebox B ACS unit
2. This manual
3. Requested optional items (RFID keys, ACR programmer interface)
This product has been packed with the utmost care. If you receive it damaged or incomplete, please notify immediately your
findings to the Carrier, and collect it only under conditional signature.
2. Product description
2.1 Intended use
The TIMEBOX allows to purchase any of the two available pay-for-time service. Time is purchased by introducing coin(s) or
valid RFID key, then choosing the desired service by pressing the relevant onboard button keys. Price and time for service can
be set at any time, by entering the programming section of the menu.
The unit can be installed outdoor, provided it is located in a position that is conveniently sheltered from
unfavourable weather conditions.
2.2 Available functions
- Payment and independent activation of 2 service lines.
- Accounts audits on display (access to Audits by internal pushbuttons or Master/Service Keys).
- Ad libitum custom configuration of price and time (access to modifications through on-board pushbuttons or Master Key):
time duration 100 msec ÷ 10 hrs; price 0,05€ ÷ 50,00€.
- Credits recharge of the RFID Keys.
2.3 General Data
Size:
Weigh:
Power supply:
Highest current at relay contacts:
Working temperature: Installation:
Components:
Coin acceptor
Control board
Interface service board
Cashless Reader

TIMEBOX ACS ALBERICI
Rev. 1.05
Manual
Page
5
2.4 Caution
1 - Comply with the instructions in this manual
2 - Switch power off before any maintenance operation
3 - Use only within the recommended temperature/humidityrange 4 -
Do not expose the machine to direct sun light,
5 - Do not favour contact with dusts or chemical moisture or sprays, water or other liquids 8 -
Wipe clean by a dry piece of cloth (or slightly wet with alcohol)
9 - Do not use thinners or organic solvents
3. Reception and Handling
After testing, the device and its accessories are carefully packed in cardboard boxes.
Upon reception of the goods:
Before signing the collection receipt, open the packaging and check that the product has not been
damaged during transport, or whether any anomalies appear. In this case, report it immediately to the
forwarder/driver, and have the complaint transcribed on the receipt document, before signing.
If it is necessary to stow the unit before installation, take care to store it inside its packaging, in an environment
protected from atmospheric agents.
All packaging material must be recycled or disposed of in accordance with the laws applicable in your Country.
4. Parts description
POS.
PART NO.
DESCRIPTION
A
SH-5T31
Active One ARM pcb, with 2x16 display
B
PL-MK21-ET60
PMK21 clear Halo pushbutton
C
PM-M186
MP17 RGB 12V LED-holder
D
GE-66SU-000A
AL66S cctalk coin acceptor
E
SH-40AN (12Vdc)
SH-40CN (24Vdc/ac)
SH-40DN (230Vac)
Twso-relay Servo p.c.b. (dc / ac power supply)
K-A1C-000001
KA faceplate with RFID ACS ccTalk Key reader (only
ACS reader: CH-BC00)
TBG-R005-Z00
Coin box for Timebox B
AM-1509
Flat Key lock, keyed different, L=21

A
5. Size
6. Installation
6.1 Cautions and dangers when installing
The unit must be installed by qualified technicians, skilled in mechanical and electrical operations.
Keep power supply disconnected during installation and during any further servicing.
Do not modify the circuits in the unit. Any change could impair the correct functioning.
The power line must comply with the Norm CEI 64-8/7. The section of the Ground lead must not be
smaller than the one prescribed by the CEI 64-8/4 Norm.
It is recommended that the line is under the protection of a 10A differential
switch, so as to make it easy to take power off when servicing.
6.2 Mounting
It is recommended to install it away from direct weather
agents such as rain/hail and sunlight.
Praticare 6 fori sulla parete o su un sostegno in metallo o legno
in corrispondenza dei fori predisposti sulla facciata sinistra della
TimeBox B.
A seconda del tipo di parete, inserire tasselli a espansione nei
fori praticati.
Aprire la Timebox, e fissare la sua facciata sinistra alla parete
mediante viti e rondelle nei fori corrispondenti ai fori tassellati.
76
21
21
6
52
54
66
Drill 6 holes on the wall or on a solid metal or wooden
support in correspondence with the holes provided on the
left side of the TimeBox B.
Depending on the type of wall, insert expansion anchors
into the drilled holes. Open the Timebox, and fasten its left
side to the wall by means of screws and washers in the
holes corresponding to the anchors.

TIMEBOX ACS ALBERICI
Rev. 1.05
Manual
Page
7
6.3 ActiveOne control p.c. board
To enter the menu, to navigate it, and to modify its default settings, press simultaneously for 5 seconds the 3
keys (“+” , ” –“ , “OK” ) located behind the display.
SW UP: scroll functions forward and increase values
SW DOWN: scroll functions backward and decrease values
SW OK: confirm options and values
See section 7.3.1 for the Menu settings.
P1 (2x4 poli): SPI output
P2 (2x3 poli): RGB pushbutton 1 (SERVICE LINE A)
P3 (2x3 poli): RGB pushbutton 2 (SERVICE LINE B)
P4 (2x3 poli): reserved
P5 (2x3 poli): power in and credit signal OUT (500 mA, OC) to the Servo p.c.b.
P6 (2x3 poli): reserved
P7 (1x5 poli): connection for (optional) external programming keypad K-P3N-000006
P8 (1x4 poli): ccTalk line for RFID ACS reader and coin acceptor
The output signals from pins 2 and 6 of the P5 connector are in TTL format; they drive the input circuit of the
Servo p.c.b., to activate the relay relating to Service Line A or the one relating to Service Line B. The cables for
activating the Service Lines must be connected to the Servo p.c.b.; the power supply (POWER IN) for the entire
unit must be provided to the Servo p.c.b.: see wiring diagrams in section 6.4.1.
6.4 Electrical connections
Electrical cables must not be powered during installation!
The sockets P8, P2, and P3 are already connected to the coin acceptor (P8), to the ACS reader (P8), and to the pushbuttons (P2, P3).
P5 to Servo-relay pcb
1. N.D.
2. (O.C.) LINE B
3. +Vdc (12/V)
4. Inhibit
5. GND
6. (O.C.) LINE A
P2 = P3 to pushbuttons
1. MICROSWITCH
2. RED LED
3. +12V
4. BLUE LED
5. GND
6. GREEN LED
P8 to ACS reader
1. N.D.
2. +12V
3. GND
4. CCTALK DATA
Timebox loom kit
S-030316-000

OUT 2: LINE B, N.C.
OUT 2: LINE B, N.O.
EQUIPMENT
1
To/from P5 connector of the
Active One display board
POWER TO
EQUIPMENT:
230Vac, or 24Vac,
or +24Vdc, or
+12Vdc
IN 1: C1 LINE 2
OUT 1: LINE 2, N.O.
OUT 1: LINE 2, N.C.
IN 2: C2 LINE 2
DISABLE: Vac L or Vcc +
DISABLE: Vac N or Vcc -
POWER IN: GND (ac)
POWER IN: N (ac) or - (dc)
+ / L
- / N
GND
POWER IN: 230Vac,
or
24Vac,
or
+24Vdc,
or
+12Vdc
INH –
INH+
N.O. 2
N.C. 1
N.O. 1
6.4.1 Servo-control board
The TIMEBOX B is available for the following power supplies at choice: 230Vac, 24Vdc/Vac, 12Vdc. When placing your
orders, please specify which power presetting you need: the interface Servo-board shall be prepared and delivered
accordingly.
A 10p flat cable connects the Active One control board to the Servo-board.
Power the Servo-board by the 3p socket J1, according to the following pattern:
230 Vac
24Vac
24Vdc
12Vdc
Pin 3:
line 230Vac
Line 24Vac
+24Vdc
+12Vdc
Pin 2:
neutral
neutral
0Vdc
0Vdc
Pin 1:
GND
GND
6.4.1a Connections to start the equipment by relay transmission of power supply:
Service Line 1 (Pushbutton A): from power supply, connect one end of service Line 1 straight to the relevant actuator (i.e.
electrical motor, solenoid, a.s.o.). Connect the other end to pin 1 (COM 1) of J2 connector.
If operation mode is “normally open”, take the switching wire to the 1 actuator from pin 2 (N.O. 1). These wires must be able
to sustain 10 Amps current draw.
If operation mode must be “normally closed”, take the switching wire to the actuator from pin 3 (N.C. 1). If the actuator
works by d.c., take care to connect properly positive and negative poles!
Service Line 2 (Pushbutton B): from power supply, connect one end of service Line 2 straight to the relevant actuator (i.e.
electrical motor, solenoid, a.s.o.). Connect the other end to pin 4 (COM 2) of J2 connector.
If operation mode is “normally open”, take the switching wire to the 2 actuator from pin 5 (N.O. 2). These wires must be able
to sustain 10 Amps current draw.
If operation mode must be “normally closed”, take the switching wire to the actuator from pin 6 (N.C. 2).
It is possible to disable coin acceptance in any of the following two ways:
Electronically - Pins 7/8 of green connector J2: provide any Vdc (+) or Vac (line value) to pin 7, and respectively 0Vdc
(-) or Neutral Vac to pin 8.
Mechanically - move to OFF the dip-switches located on the coin acceptor. Move them back to ON when you want to
resume coin acceptance.

TIMEBOX ACS ALBERICI
Rev. 1.05
Manual
Page
9
6.4.1b Connections to start the equipment by one clean relay switch:
Service Line 1 (Pushbutton A): from pin 1 (COM 1) of the J2 connector, take a wire to the actuator of service line 1. If
operation mode is “normally open”, take the switching wire to the 1 actuator from pin 2 (N.O. 1).
If operation mode must be “normally closed”, take such wire from pin 3 (N.C. 1).
Service Line 2 (Pushbutton B): from pin 4 (COM 1) of the J2 connector, take a wire to the actuator of service line 2. If
operation mode is “normally open”, take the switching wire to the 2 actuator from pin 5 (N.O. 2).
If operation mode must be “normally closed”, take such wire from pin 6 (N.C. 2).
It is possible to disable coin acceptance in any of the following two ways:
Electronically - Pins 7/8 of green connector J2: provide any Vdc (+) or Vac (line value) to pin 7, and respectively
0Vdc (-) or Neutral Vac to pin 8.
Mechanically - move to OFF the dip-switches located on the coin acceptor. Move them back to ON when you want to
resume coin acceptance.

A
A
A
A
A
Access to
Service Menu…
ACCOUNTS
A
7. Operation
7.1 Getting started
Switch the machine on: the display will lit on and will show the following message:
The machine is ready to operate by the following default preset values:
The Timebox B is able to simultaneously control two independent pay-for-time service lines, having different price and time
length. When introducing one coin or the RFID key, the corresponding credit will be displayed. If such amount is enough to
activate at least one of the two service lines, this one (or both of them) shall be proposed, and the relevant pushbutton light
will change from blue to green colour.
When pressing the button for service line A (or service line B), the display will show briefly paid amount and total time, then
the relevant relay will switch on, and remain on, for the set time. The display will show the progress of the count- down, and
the pushbutton will be blinking until end of service time.
If it has been introduced a larger amount than the price for the service, the proportionally larger activation time shall be
displayed and activated.
When the device gets switched on for the first time, the RFID key ACS reader flashes red, to signal that it must be
initialized. (see section 7.3.2.3.1b). The Timebox can be used also if the ACS has not been initialized.
7.2 Access through Master/Service Key
Insert the service key (Master or Service) in the RFID reader to view the audits and to initialize User keys (or else access
the menu using the on-board pushbuttons).
The Accounts menu appears and the pushbutton lits up green:
Hold down for 4” the pushbutton to
get access to the Accounts sub-menu.
Briefly hold down the pushbutton to show:
Hold down the for at least 4” to get
access to the sub-menu (see sect. 7.3.2.3.1b).
Press again the pushbutton to return to:
Remove the Master/Service Key to exit the Service menu. The standby message appears:
Accounts: press the pushbutton for at least “2 to enter to the audit details:
Press briefly and repeatedly the pushbutton to show:
If no Master/Service key is at hand, the records can be cancelled also by entering the menu by the on-board buttons.
Totals IN
xxx,xx €
A
Totals OUT
xxx,xx €
A
Reset
Partial records
price of service = 0,50 €
pulse length = 30 sec
Line 2:
price of service = 0,50 €
pulse length = 30 sec
Line 1:
System
in service
Totals IN
xxx,xx €
System in
service
INITIALIZE
CASHLESS
ACCOUNTS

TIMEBOX ACS ALBERICI
Rev. 1.05
Manual
Page
11
Initialize Cashless (ACS Reader and Keys): see Section 7.3.2.3.1b.
PLEASE NOTICE: THE Master Key (black) can activate any of the Service Lines A and B even without being loaded with credits.
7.3 Modifying the Menu data
7.3.1 MENU NAVIGATION
To enter the menu, to navigate it, and to modify its default settings, press simultaneously for 5 seconds the 3
keys (“+” , ” –“ , “OK” ) located behind the display.
SW UP: scroll functions forward and increase values
SW DOWN: scroll functions backward and decrease values
SW OK: confirm options and values
7.3.2 MENU STRUCTURE
7.3.2.1 SHOW ACCOUNT RECORDS
This sub-menu allows to:
- read the records corresponding to the cashed total and partial amounts;
- reset (cancel) the recorded Total amounts (it is necessary to enter the PIN code);
- reset (cancel) the recorded Partial amounts.
OK
OK
DOWN
EXIT
MENU
DOWN
SET UP
DOWN
OK
SHOW CCTALK
PERIPHERALS
DOWN
UP
EXIT
MENU
ACCOUNTS
OK
SYSTEM
IN SERVICE
UP
DOWN
OK
NOTICE: access to some functions requires entering the PIN code.

(*) Must
enter the
PIN code
7.3.2.2 SHOW CCTALK PERIPHERAL UNITS
This function shows the state of the devices (connected, disconnected, in error, …):
7.3.2.3 SETTING UP OPERATION PARAMETERS
OK
Reset to default
configuration
Operation
set up
**
Initialize
Cashless
Change
PIN
Change
Language
Exit
Promotion
Coin acceptor
set up
Peripheral units
set up
See 7.3.2.3.3
PIN code needed
See 7.3.2.3.2
Write your 16-digits
message to appear
on the display when
in stand-by condition
* See Section 7.3.2.3.1
** Only if ACS reader is present
OK
OK
DOWN
(*)
Reset
Total records
Reset partial
records
OK
Reset
Accounts
DOWN
SET UP
Uscita
Show
Account records
ACCOUNTS
OK
OK
DOWN
CASHLESS
CONNECTED
DOWN
COIN ACCEPTOR
CONNECTED
See 7.3.2.3.4
PIN code needed
See 7.3.2.3.5
PIN code needed
Exit
Partials Line A
0,00 €
Partials Line. B
0,00 €
DOWN
OK
OK

TIMEBOX ACS ALBERICI
Rev. 1.05
Manual
Page
13
OK
Saving
Settings …
DOWN
UP
OK
DOWN
OK
DOWN
UP
OK
Price of serv. 1:
0,50 €
7.3.2.3.1 Set up peripheral units
(*) Make use of
the UP / DOWN
keys to modify
7.3.2.3.1aSet up the Service Parameters (price / duration)
Press the key: if value must be modified, press again the key.
It is now possible to increase the price by pressing repeatedly the key, or decrease it by the key. Each touch
changes the price value by 0,05 € step:
Notice: holding down the key for 4 seconds, the increase/decrease variation runs faster.
Press then to confirm the chosen value and carry on to modify the pulse time lengt: .
The pulse duration (i.e. the service dispensing time) can be increased by holding down the key, or it can be decreased
by the key. Each touch changes the time value by 0,01 seconds (10 msec) steps:
Notice: holding down the key for 4 seconds, the increase/decrease variation runs faster
Once the desired value has been reached, it can be confirmed by the key.
The display will now show: .
If the Service Line 2 must be also used, repeat the setting operations described above for the Service line 1,
or else press repeatedly the key until obtaining the exit option:
To save the settings, press : the message will briefly appear.
OK
Peripheral units
set up
(*)
0,50
OK
OK OK
< 2,00 > 1,00
See 7.3.2.3.1a
Set up Service
Parameters
5 < 10 > 20 50 100
NO OK OK OK OK
< 2,00 > 1,00 0,50
NO OK OK
Coin Acceptor
set up
Exit
2,00 < 1,00 > 0,50
OK OK OK
2,00 1,00 < 0,50 >
OK NO OK
Price of serv. 1:
0,45 €
DOWN
Price of serv. 1:
0,50 €
UP
Price of serv. 1:
0,55 €
Pulse length 1:
0,29 s
DOWN
Pulse length 1:
0,30 s
UP
Pulse length 1:
0,31 s
Exit
Set up
Service Parameters
Initialize
Cashless
See 7.3.2.3.1b
Pulse length 1:
0,30 s
Price of serv. 2:
0,50 €

7.3.2.3.1aCashless setup
When first powering the unit on, the RFID ACS Reader flashes red, to show that it must be initialized.
-Initialize the ACS Reader
Edit a 6-digit PIN code, write it down and keep it in a safe place.
(*) The code must consist of 6 alphanumeric characters: press the OK button, the cursor sets to the
first digit: with UP or DOWN, choose the letter or digit to be entered, and confirm with the OK button.
The cursor will move to the next digit. When confirming digit n. 6, the request to confirm the entered
code appears. By selecting the "<" symbol and pressing OK, the last character entered gets deleted.
If RFID keys must be used that have already been initialized on another Alberici cashless reader,
take care to enter the same 6-digit PIN of the device in which they were initialized.
(**) If the same alphanumeric sequence entered before is wrongly re-written, the message appears:
and after 3 "the request to enter the correct code is presented again.
To protect the safety of the Device owner, it is no longer possible to change
the 6-digit code after it has been confirmed.
-Initialize the Master and Service Keys after having initialized the RFID ACS Reader
Following to the initialization of the ACS Cashless reader, the Master key (Owner - generally the black one) and the Service key
(Operator - generally yellow) can be initialized as well.
NOTICE: initialization of the keys can be postponed. In this case, see next page flow chart.
Insert the Master key and press the OK button: the display will prompt to enter the PIN code. After entering the last character, the
display will require confirmation of the same code. Insert the code again: the initialization
of the Master key will be started. When complete, the confirmation message gets displayed:
If a second Master key or the Service key must be created, repeat the process described.
Or else, choose the Service Key option in the menu to initialize the related key (Operator - generally white). To exit, remove the key
and wait for the device to return to tits stand-by condition.
-Initialize the User Keys
To initialize the User keys, exit the menu, insert the Master key or the Service key (already initialized on the same Timebox) in the
ACS key reader. The "Service Menu" will open: navigate by the "+" button in the menu shown, until finding the option INITIALIZE
KEYS: then press OK. Remove now the Master / Service Key, insert one User Key, and follow the instructions appearing on display:
Remove the key and insert a new one, and so on until you have initialized all the keys that can be used on this player. To exit,
remove the last key and wait for the device to return to the stand-by condition.
-Load credit on User Keys
Once User Keys have been initialized, they can be loaded with credit in three ways:
1) In case of self-service top-up:
- introduce the coins into the coin mechanism of the Timebox;
- enter the User Key
- press the lit up pushbutton: the amount introduced will be loaded on the key, and the display will show the total credit available.
2) Using the ACR user key programmer (K-P4N-000007), from
connect to a PC and use the ccTalk-mifare credit loading software
supplied with the ACR programmer.
The programmer and the relative software allow to cancel the configuration
of keys that have been programmed incorrectly.
3) By means of the KEY_LOADER ONE ACS (TB-L6A2) credit-uploading device:
Key
initialized!
Do not remove
the Key..
Key
initialized!
Insert User Key
Please wait…
Remove the Key
Insert
Key..
Enter PIN
_ _ _ _ _ _
Antenna has been
initialized!
Wrong
confirmation!
Initialize Cashless
antenna
Enter
PIN code
Confirm
PIN code
Write down
PIN code

TIMEBOX ACS ALBERICI
Rev. 1.05
Manual
Page
15
(**)
KEY
INITIALIZED!
-Initialize the RFID Keys at a later time
Enter your 6-digit PIN
Insert Master Key Insert Service Key
Wait……
Remove the initialized Key:
the following revolving
messages will be displayed:
(**) should the Key be
spoiled or invalid, the
following message will
be displayed: ‘KEY NOT
ENABLED!’
Insert Key to be
initialized
Insert Key to be
initialized
DO NOT REMOVE
KEY…..
DO NOT REMOVE
KEY…..
(**)
KEY
INITIALIZED!
Initialize
Cashless
Enter PIN
0…
Master
Key
Masdter
Key
Exit
Insert Key to be
initialized
Insert Key to be
initialized
or press OK
to exit
or press OK
to exit

7.3.2.3.2 Modify the PIN code
The PIN code allows to get access to the discretional menus of the system.
The PIN code is made up by 4 figures (each of them from 0 to 9: 10,000 combinations available).
PAY ATTENTION: the default PIN code is 0000
The settings in the following menus can be modified by using the PIN code:
MODIFY PIN - RESET ACCOUNTS - RESTORE DEFAULT CONFIGURATION
To modify the existing PIN, press OK, and digit the old PIN code: to digit each code figure, first use keys UP and DOWN
to set each figure, then confirm it by OK. Once the 4th figure has been confirmed, confirm by OK the whole old PIN:
To enter the new PIN code, use first the UP and DOWN keys to set each figure, then confirm it by OK. Once the 4th figure
has been confirmed, confirm by OK the whole new PIN.
As every single figure gets confirmed, an asterisk takes its place, so preserving secrecy.
NOTICE: when DEFAULT CONFIGURATION is restored, the PIN code gets reset to 0000.
If the entered PIN is not correct, the User is given another 4 tries before the board gets blocked-up by its security interlock.
Before the 5th error, the system can be started again by switching it off and on again. After the 5th error, the machine will be
blocked, while the display will show two codes. Please send such codes to Alberici Assistance, to get the reset information.
7.3.2.3.3 Restore to Default configuration
Once the 4th digit has been entered, all settings get restored to their default status, and the confirmation message is shown:
WARNING: the system sets back to default configuration (see section 7.2). The PIN code will be reset to the default 0000
setting. Account records shall not be cancelled.
7.3.2.3.4 Exit
Press the OK key to return the system to stand-by.
Exit Menu
in progress …
System
in service
EXIT MENU
New PIN 0Enter PIN 0
MODIFY PIN
DEFAULT CONFIG.
RESTORED
RESTORE DEFAULT
CONFIGURATION
Enter PIN
_......

TIMEBOX ACS ALBERICI
Rev. 1.05
Manual
Page
17
8. Operation
8.1 Coins:
When inserting coins, as long as the lowest price amount has not been reached, the display will show
As the credited amount gets to match the lowest price (ex. Service Line 1), the buttons light turns from blue to green, meaning that the
system is ready to receive the starting command. The display shows the Service Line(s) that can be started by the inserted amount:
%
and prompts to :
%
If the Service Line 2 must be started, and its price is higher than the price for Service Line 1, more coins must be dropped in until
matching the Service Line 2 price. The pushbutton B will turn from blue to green colour, ready to be activated.
If both Service Lines have the same price, both pushbuttons A and B will turn from blue to green colour.
When pushbutton A or B are pressed, the relevant relay in the Servo-relay p.c.b. will close the contacts to the external A or B device;
the pushbutton will go on flashing until the service time ends.
If more coins are introduced during the dispensing of the service, a corresponding proportional amount of time will be added up to
the remaining fraction of the time already bought.
8.2 Keys with sufficient credit:
Introducing an RFID key charged with sufficient credit, or as many coins as to reach the amount requested to start the service, the
button blue light turns to green, indicating that the system is ready. The display shows the credit contained in the key:
and prompts to:
Press the button once: the trigger pulse is sent to the control board, while the button flashes yellow. At the same time, the display
will show for 5 seconds the credit remaining in the stick.
Each pressure of the button sends one signal to the control board, and one credit is taken off from the amount in the key.
8.3 Keys with insufficient credit –top up credit:
When introducing an RFID key charged with insufficient credit, the following message shows up:
changing to:
In this case, the key can be recharged by inserting coins in the coin acceptor, until the desired value, and then by pressing the A
button. The display shows:
followed by:
Press button to
start service
Credit 30.00 €
Credit 29.50 €
Introduced 0.50 €
Credit xx.xx €
Data being
saved …
Credit 00.00 €
Insert credit
Credit 00.00 €
Insufficient Credit
Credit 00.00 €
Insufficient Credit
to start
service
Press
Pushbutton A
Service Line N. 1
Credit 1.00 €

9. Product disposal
10. Terms of Guarantee
The manufacturer will fix malfunctions arising from production faults in this machine or parts of it within 12 months from the date
of sale.
All communications referring to guarantee repairs or replacements must be accompanied by the product serial number and the
copy of the sale invoice.
To obtain your guarantee repair, please send the part to the Dealer where you purchased the machine, together with the following
documents:
- copy of the sale invoice
- delivery note stating “returned for guarantee repair”
- detailed report of the problem found and the circumstances in which it occurs.
Before sending the product, please get in touch with your Dealer or with Alberici S.p.a. ([phone]); very malfunctions
can be fixed via a simple phone call, saving you costs and time.
Alberici S.p.a. will verify that warranty is applicable, i.e. that problem is not caused by:
- transport damages
- damages from incorrect installation or wrong configuration
- installation in premises or areas not complying with the prescribed safety requirements
- intentional or unwilled tampering
- wrong or careless use or maintenance
- non-compliance with precautions prescribed (see Chapter 4. Caution)
- natural disasters, vandalisms, intentional or unintentional damage
Guarantee is considered automatically expired if outer and inner labels are missing.
Transport costs of repaired products are at the Customer’s charge.
11. Customer Service
Alberici S.p.a. will be pleased to offer all the necessary information on use, ordinary maintenance and technical service. Please call
([phone] and specify if your request concerns information on use or technical support.
WARNING! DISPOSE OF ACCORDING TO THE GOVERNING LAW IN YOUR COUNTRY!
This equipment may not be treated as household waste. Instead, it must be handed over to the
applicable collection point for the recycling of electric and electronic equipment. By ensuring that
this product is dised of correctly, you will help to prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product.
For more detailed information about recycling of this product, please contact the Dealer where
you purchased this product.

TIMEBOX ACS ALBERICI
Rev. 1.05
Manual
Page
19