Alberici HIRA 2 ARM POS User manual

1
Hira 2 ARM POS Mini, Midi, Maxi, standard display
Operator’s Manual
Rev. 2.02 EN
HIRA 2 ARM POS
Operator’s Manual
Progettazione e produzione di sistemi di pagamento e accessori per macchine Gaming, ending e Car-Wash Design
and manufacture of payment systems and accessories for the Industries of Gaming,
ending and CarWash

2
This manual has been drafted with the utmost care. Nevertheless, it is not possible to guarantee at all
times the absolute correspondence of the descriptions contained therein with the actual
characteristics of the product.
Alberici S.p.A. declines any and all responsibility towards the User with reference to damages,
losses, or claims of third parties, resulting from the use of the product or caused by incorrect
interpretations of this manual.
Alberici S.p.A. reserves the right to modify, without prior notice and in any way, any part of this
manual and the technical specifications of this product, as part of the continuous pursuit of
improvement of its products.
N TICE

3
CONTENTS
1. Package content: .......................................................................................................................... 4
2. Components description ............................................................................................................... 4
3. Product description ...................................................................................................................... 5
4. Warning ........................................................................................................................................ 5
5. Installation .................................................................................................................................... 6
6. peration ...................................................................................................................................... 9
7. System configuration….……………………………………………………………………….12
8. Messages……………………………………………………………………………………….28
9. Cleaning the Note Validator ....................................................................................................... 30
11. Disposal of the product ............................................................................................................... 31
12. Terms of Guarantee .................................................................................................................... 31
13. Customer Service ........................................................................................................................ 31
STORICO RE ISIONI
Revisione n°
Data
Modifica
Note
Creazione 1.00
30.12.14
Creazione
FW v. 1.14 (scheda CMS Full)
Rev. 1.01
1 .02.15
Funzioni abilitazione/disabilitazione e erogazione via GSM.
FW v. 1.16
Rev. 1.02 10.03.15 Aumentato timeout visualizzazione valore svuotato. Inserito 1’
Timeout di uscita in menu svuotamento
FW v. 1.1
Rev. 1.03
27.06.15
Abbassato timeout cancellazione automatica credito residuo
FW v. 1.19
Rev. 1.04
29.04.16
Inserito lettore ACS
FW v. 1.23
Rev. 2.00
07.03.19
Uniformato
manuale per
i
3 modelli Mini, Midi, Maxi
FW v. 1.26
Rev. 2.01
04.06.20
Integrazione VPOS Touch Nayax
FW v. 1.3 .04NL
-
ARM v. A1.03
Rev. 2.02
16.12.22
Nuovo cabinet v. 3 e Modulo di alimentazione integrato MP1
FW v. A2.11

4
Dear Customer,
we would like to thank you and congratulate for your choice. We trust that you will appreciate the
quality and performance of the HIRA TW automatic Change Machine.
This machine operates by cctalk protocol, the well-established serial communication mode that
provides security and precision.
1. Package content
The package contains:
1. the Alberici HIRA 2 / Hira 2 Maxi Change machine
2. 1 pair of keys
3. the power cable (see inside of money box)
4. the instruction manual (this manual)
This product has been packed with the utmost care. In the case that you receive it damaged or
incomplete, please notify immediately your findings to the Carrier.
2. Components description
E
A
I
P
L
G
M
F
POS. COD. DESCRIZIONE
A
AE
-
0806
o
r
A
-
PW0002
Power supply box
RD
-
125
o
r
MP1
integrated Power Module
,
wi
th Hub pcb
B
SH
-
5L21
CMS ARM Full Change ne p.c. board
C
AA
-
0177
Hub pcb for Peripheral units
D
K-02C-020110
(Mini), or
K-02C-020078
(Maxi) or
K-02C-020070
(
M
idi)
2 x Hopper ne S11 ccTalk STD without
sliding base and w/out optics (includes
relevant capacity extension E)
E
AA-0309
AA-0315
AA-0333
SECT R 100 capacity extension (HIRA 2 Mini)
SECT R 300 capacity extension (HIRA 2 Midi)
SECT R 100 capacity extension (HIRA 2 Maxi)
F
LB
-
LU01
-
0004
or else:
LB-MU02-0004
Billy ne ccTalk note validator
or else:
ry ne ccTalk (stackered) note validator
G
PL
-
MK21
-
ET6H
Halo quick
-
fix square 21 RGB pushbutton
H
AM
-
1509
Flat key lock L=21mm keyed different
I AM-1305, else
HR1-011A-P00
Plastic “A” coinbox, or else
Metal coin box
L GE-66SU AL66S coin acceptor
M IM-N000-0L10 PP coin entry slot
(
N
)
C
-
140102
VP S Touch Nayax 3G EU
-
Marshall
(
’
)
A
-
CM0059
Interface pcb for VP S Touch Nayax
(
”
)
A
-
CM0068
Interface pcb for WL Valina P S
(
P
)
CH
-
B
C01
-
0001
ACS RFID Card/Key reader
Please read carefully this handbook, to obtain the ost fro your achine.
’/ ”
N
C
D
A
H
B

5
3. Product description
3.1 General data
Tec nical specs:
HIRA 2
Size:
Weight:
Voltage:
Nominal power:
peration temperature:
Installation:
Coin capacity:
Components:
Power supply unit
Control board
Note validator
Pay-out Hopper
Coin acceptor
P S Terminal (option)
RFID reader (option)
Remote audit (option)
See page 6
Mini: 30 Kg (50 with floor-stand) - Midi: 39 Kg (59 Kg with floor-stand) – Maxi:35
Kg (55 with floor-stand)
230 Vac - 50 Hz
340 W max
0°C ÷ +50°C
Desktop or on floor-stand or wall-mount , indoor
Mini: 4000 - Midi: 5600 - Maxi: 7200
Power switching 340W
CMS ARM Full Change ne p.c. board, with DISPLAY LCD 2x16
BILLY NE, or else: RY NE (with stacker)
2 x Hopper ne S11, or 2 x AH4, or 1 x S11 + 1 x AH4
AL66S cctalk
VP S Touch Nayax, or preset for Worldline Valina
ACS RFID Card/Key reader
Alberici
Hermes
GPS/GSM/GPRS (*)
Notice: Euro is the preset currency. Different currencies can be set by using the Alberici Babbel software.
(*) The system requires that the B-to-B Alberici SIM card is inserted into the Hermes module SIM slot, and
that a subscription is entered into the ARG Portal, in order to control the machine via the Internet.
3.2 Available functions
- Change of notes and coins into 1 or 2 denomination coins, at User’s choice
- Purchase by notes/coins of 1 or 2 denomination tokens, at User’s choice
- Purchase by notes/coins of 1 denomination tokens, with cash change returned
- Purchase of tokens by P S transaction
- Control of accounts via display (by on-board keys)
- Programmable via menu (by on-board keys)
- Change of display language by external “LANGUAGE/SEL+” pushbutton, at User’s choice.
4. Warning
- Comply with the instructions in this manual
- Switch power off before any maintenance operation
- Use only within the recommended temperature/humidity range
- Do not expose the machine (and especially the mote acceptor front plate) to direct
sun light or to incandescent light (> 3000 Lux)
- When in presence of car exhaust gas or smoke, clean and check the components (the note acceptor
in particular) regularly and frequently.
- Do not favour contact with dusts or chemical moisture or sprays, water or other liquids
- Install indoor
- Wipe clean by a dry piece of cloth (or slightly wet with alcohol)
- Do not use thinners or organic solvents
- The note acceptor could reject (or get jammed by) stained notes, or worn out, wet, wrinkled, torn,
dog-eared, oil-smeared, with sticking tape or similarly affected.
- Clean monthly the sensors of the note acceptor. Remove paper dust that has accumulated on the
drive wheels, by a clean piece of cloth or a cotton swab. Do not use alcohol nor solvents or scrapers.
!

6
5. Installation
PAY ATTENTION: IT IS ESSENTIAL TO FASTEN THE MACHINE TO A
SOLID WALL BY USING RELIABLE EXPANSION BOLTS.
IT IS RECOMMENDED THAT YOU MAKE USE OF THE WALL-MOUNT
SLAB (ref. HRP-021A-V06 for HIRA 2 Mini, HRM-AM15-V06 for HIRA 2
Midi, HRS-015A-V06 for HIRA 2 Maxi) .
All measures in mm
Put the Change Machine in place and fasten it
to the wall by expansion bolts through the “x”
holes in the rear side of the cabinet. Keep the
on-off switch accessible. In addition, the
machine can be secured to the floor: the large
holes at the foot allow securing the machine
by a binding chain.
The fastening slab allows to easily securing
the machine to the wall. nce fixed the slab
to the wall, the machine can be either fastened
to it by screws (“Z” holes), or just hung upon
the slab’s hooks, so as to remove it at ease.
!
Mini
Maxi
Midi

7
W ALL - MOUNT SLABS :
HRS-0 5A-V06 for HIRA 2 Maxi
430
Prepare the tunnel for the
power cable in the wall
(corresponding to “Y”
Hole in the slab) .
Fasten the slab to the
wall by sturdy
expansion bolts,
through the 6
“X” ( 12 mm) holes .
Connect the cable to its socket behind the
machine, and hang the latter on the 4 “W”
supporting hooks .
Fix the machine to the slab by M8 screws
through the three “Z” threaded holes, if you
do not plan to often remove and hang the
machine up to its ”y” hooks.
HRM-AM 5-V06 FOR HIRA 2 M IDI
430
Prepare the tunnel for the
power cable in the wall
(corresponding to “Y”
Hole in the slab) .
Fasten the slab to the
wall by sturdy
expansion bolts,
through the 6
“X” ( 12 mm) holes .
Connect the cable to its
socket behind the machine, and hang the
latter on the 4 “W” supporting hooks .
Fix the machine to the slab by M8 screws
through the two “Z” threaded holes, if you do
not plan to often remove and re−hang the
machine up to its ”y” hooks
.
 12

12
135
135
45
430
430
45
45
45
40
40
45
45
70
70
70
220
250
220
250
70
625
760
40
HRM
-
AM 5
-
V06
FOR
HIRA 2 M
IDI

HRP-02 A-V06 FOR HIRA 2 M INI
Prepare the tunnel for the power
cable in the wall (corresponding
to “Y” Hole in the slab).
Fasten the slab to the wall by
sturdy expansion bolts, through
the 6 “X” ( 12 mm) holes.
Connect the cable to its
socket behind the machine, and hang the latter on
the 4 “W” supporting hooks.
Fix the machine to the slab by M8 screws through
the two “Z” threaded holes, if you do not plan to
often remove and re−hang the machine up to its
”y” hooks.
P REPARATION FOR U SE :
PAY ATTENTION : FILL THE HOPPERS ONLY WHEN THE MACHINE IS OFF
pen the door and locate extensions capacity on top of the hopper.
Unlock the latch A (white slide) of the cover and slide the latter fully out
towards the outside, until is positioned as a pilot chute: pour into the
hopper the coins or tokens to be dispensed as change.
Unlock again the latch A and slide the cover back to “closed” position.
Close the door of the machine.
Plug the power cable in, and turn the main switch on.
Component check and self-setup shall start automatically. At the end, a message informs that the
machine is ready for operation, showing what coin/token value will be paid in exchange for notes
and coins introduced, as well as a welcome wording ( perator enters Promo text, see Sect. 7.3.10).
This message takes shifts with:
As soon as the control board enables the note acceptor, the latter’s front slot flashes once in blue
colour for each enabled note, or once in red for each disabled note. For instance, if the 5, 10, 20
Euro notes are enabled, and the 50- and 100-Euro notes are disabled, the front slot will flash 3
times in blue colour and 2 (twice) in red. The machine is now ready to operate.
In the stand-by condition, the buttons of all available programs are illuminated in blue light.
If available in the machine, the ACS RFID reader must be first initialized; the Master/ wner
key/card and the Manager/ perator key/card must be initialized as well. The Manager/ perator
key/card is generally used for Service operations (see Section 7.3.5.4).
By means of the Master/ wner key/card, User key/cards can be created too, by which Users may
purchase Tokens or services from compatible ACS Readers (i.e. same PIN as the ACS Reader in
the machine) placed in other units. The credit in the key/cards can be loaded or topped up in the
Hira machine by inserting cash in the coin acceptor or in the note validator (see Section 6.4.1).
CHANGES TO
2,00 € - 1,00 €
CHANGEONE
Promo message

6. Operation
Three pushbuttons are available: the ones marked “SEL-“ and “Language/SEL+” allow
the User to choose the coin (or token) value he wants back as change. The “ K” button will
confirm the selected option. The “Language/SEL+” button allows the User to get display
messages in his preferred language: default languages are Italian, English, German, French,
Dutch; other languages can be loaded by using the Alberici Babbel software.
The machine offers two modes of operation: AUT MATIC M DE or MANUAL M DE.
6.1 MANUAL MODE (Pay-out table available only for POS purc ase)
The Manual Mode does not allow to use the Pay-out table for Cash purchase.
6.1.1 CASH: insert cash money until the desired amount is reached. When inserted money reaches
the token (or coin) value, the relevant button(s) will change to green colour. Press the button
corresponding to the desired denomination. If the machine is set to Tokens + Change, choose the
desired number of tokens and, if odd amount remains, also small change coins will be returned.
If the machine is set to Tokens or to Tokens+Change, and the Bonus has been programmed, put
money in until the desired amount is reached, then press the K button.
6.1.2 POS: POS operation is available if the machine menu has been set up to deliver Tokens only.
If the machine is set for dispensing Coins, the P S terminal will get automatically disabled.
nly single-denomination hoppers are compatible with P S operation; as a consequence, P S
is not available in machines equipped with multi-denomination (Discriminator) Hoppers.
The display prompts to touch the “SEL“ button if purchase by credit/debit card is desired:
Press the “SEL“ button, the display will show:
- Lean your ChipCard against the P S Terminal: you will be invited to select how many tokens
must be purchased: touch the “SEL” buttons
of the machine as many times as necessary
to obtain the desired quantity. Then confirm
by the “ K” button of the machine.
- The display will invite to choose the token type that must be purchased
(ex. Token = 2€); search by “SEL”, then press the “ K” button, so that the
machine will dispense the selected number of tokens, and the bank
network will deduct the amount from the Credit/Debit Card account.
30 idle seconds after pressing the SEL- button, the syste returns to stand-by.
When the machine is set to the Manual Mode, the POS will be able to obey the Pay-out Table settings,
if the Table is enabled and programmed (from the Automatic Mode setting).
6.2 AUTOMATIC MODE (Pay-out Table available)
6.2.1 CASH: when a note or coin is inserted, the credited amount is displayed, and right away the
hopper(s) pay-out starts. The machine combines the coins contained in the hoppers in as much equal
amounts as possible. If the machine is set to Tokens+Change, all the tokens that can be bought by the
inserted sum will be dispensed and, if odd amount remains, small change coins will be returned. If
the Bonus (Tokens) has been programmed, the payout will include the Bonus tokens (see sect.7.3.8).
6.2. .A PAY-OUT TABLE ENABLED AND PROGRAMMED: if the perator enables the Pay-out Table
(see sect. 7.2.5 C) and programs it (see sect. 7.2.5.C.i), the User will be able to get only the tokens
and/or coins that the inserted money can obtain according to the combination preset. When a note
or coin is inserted, the display will show the credited amount, and the machine shall automatically
pay-out according to the combination that the perator has pre-programmed for the amount
inserted. The Pay-out Table can also be programmed to pay out more tokens than those that can be
purchased based on the credit entered, thus allowing to bestow Bonus as well.
Press SEL to
start CARD mode
INSTRUCTIONS ON
THE POS SCREEN
Select
Token 1
Credit 6,00€
Tokens paid 3
C oose Value
Token > 2,00€
Select
Token 3
SEL+/ SEL- > K

6.2.2 POS: P S payments shall only allow to obtain tokens.
If the machine is set for dispensing coins, P S operation will be automatically disabled. P S will
be available only if the machine is equipped with single-coin Hopper; in machines equipped with
multi-coin Hopper Discriminator, the configuration menu shall make the P S option unavailable.
Operation takes place as described in section 6.1.2 P S above, with the provision that the User
will be able to choose only among the payment levels preset by the Operator in the Pay-out
Table (see section 7.2.5.C.i). When purchasing through the POS, if Bonus ust be awarded, the
Pay-out Table ust be progra ed: this is also the only way to bestow POS-purchase bonus.
30 idle seconds after pressing the SEL- button, the syste returns to stand-by.
WARNING: If there are not enough coins/tokens in the hopper to fulfil the whole payout request, the re aining
credit shall be displayed and retained in e ory. Switch off the achine, fill the hoppers, and switch on again:
the re aining credit shall be paid out.
An alternative option is to set the Re aining Credit Menu (see section 7.3.14) so as to cancel the re aining
credit - and at the sa e ti e record it in the Accounts enu - by switching the achine off and on again.
6.3 RECHARGE OF CARDS/KEYS
When equipped with the ACS Card/Key Reader (see Section 7.2.5.D), the Money Changer
can operate as recharger of credit for User Card/Keys. These can then be used to purchase
services or goods from nearby self-service dispensers or distributor kiosks, provided that the
ACS readers in such kiosks have been initialized with the same PIN as the one in the Change
Machine. When the User Card/Key is in the Hira ACS reader, and money is introduced, the
display will prompt for pressing any green-lit button to load the credit onto the Card/Key.
6.4 OPERATIONS WITH RFID CARDS/KEYS
If the machine is equipped with the ACS Reader for the RFID Card/Keys, it is possible to use
such Card/Keys to obtain or perform useful functions, according to which type of Card/Key is
inserted.
6.4. Operation wit User Card/Key
When inserting a compatible RFID User Card/Key (must be initialized
using the same password as the RFID reader - see section 7.2.5.D
Set up Cashless ), the available credit gets shown, and a pushbutton
will light up and flash in green colour.
If more credit must be loaded, insert more coins and/or notes until the
desired value is attained, press the greenlit button, then wait until the
storing message (“Data are being stored”) disappears, then remove the
Card/Key loaded with new credit. The Card/Key can now be used to buy
services or products from machines equipped with ACS reader, provided that also such ACS
readers have been initialized with the same password as the RFID reader of the change machine.
6.4.2 Operation wit Service or Master (see also section 7.2.5.D)
Please note that the Service and Master cards/keys must be initialized first (see section 7.3.5.4a).
Insert the Service Card/Key (white) or the Master Card/Key (black) in the ACS reader to get
access to the Service Menu. Choose by SEL between the “Accounts” and the “Initialize Keys”
options, and confirm your choice by K. According to the chosen option, it will be possible to:
1) check and reset the Accounts Data. By the Master/ wner Card/Key, the Accounts data can
be printed out if the machine is connected to the printer (see menu steps in next page and at foot
of next page); or,
2) initialize the User Card/Keys.
Press green button
to load credit
Available Credit:
NN,nn

Totals In:
0,00 €
Remove
Master / Service
Card/Key
KEY
INITIALIZED!
Press greenlit
OK pushbutton
(*) If Card/Key is not
compatible (i.e. its PIN is
different from the PIN of
the ACS reader), the
warning ‘KEY NOT
ENABLED’ gets displayed
Insert
Master or Service
Card/Key
Insert Key to
be initialized
Press greenlit
OK pushbutton
Insert new
Card/Key and wait:
Remove the newly
created User
Card/Key
Remove Master or
Service Card/Key
KEY
INITIALIZED!
Insert another not yet
initialized User
Card/Key. Else, after
several seconds:
I NITIALIZE
K EY
A CCOUNTS
Press greenlit
SEL
pushbutton
Exits
automatically
Totals Out:
0,00 €
Total Left Credit
Paid: 0,00 €
Partials In:
0,00 €
Partials Out:
0,00 €
Press greenlit
SEL pushbutton
Press greenlit
SEL pushbutton
Press greenlit
SEL pushbutton
Press greenlit
SEL pushbutton
Insert
Master or Service
Card/Key
Confirm
Reset?
Reset
partial records
Exits
automatically
Press greenlit
OK
pushbutton
Total Cas less In:
0,00 €
POS cas ed-in:
0,00 €
Cashless = ACS
RFID Reader for
Cards/Keys
Press greenlit
SEL pushbutton
Press greenlit
SEL pushbutton
Press greenlit
SEL pushbutton
All partial
records reset
Exits
automatically
Press greenlit
OK
pushbutton
Remove
Master / Service
Card/Key
PRINT ACCOUNTS: w en t e mac ine is connected to t e printer, it is possible to get a strip
reporting records of t e accounts. Proceed as follows:
1. Insert Master (Black) Card/Key.
2. Display s ows “Account Records”: old t e greenlit (SET) pus button pressed until display s ows
“Partials in” (depending on board version, it can s ow ot er descriptions).
3. Navigate t e Accounts menu until finding “Print Accounts” (depending on board version), or else go straig t to 4.
4. Press t e OK Pus button: its lig t will flas yellow as long as t e printing goes on.

7. System configuration
7.1 Default configuration
The HIRA 2 Maxi is preset by default as follows (unless requested for different setup):
Control Board Para eters Pay-out mode = AUT MATIC
Bonus = DISABLED
Level sensors = DISABLED
Hopper S11 Para eters Hoppers no. 1 / 2 (*) = € 2.00 = ENABLED
BillyOne/OryOne Validator [ccTalk] Para eters € 5.00 - …. - € 100.00 = ENABLED
AL66 S [ccTalk]coin acceptor Para eters € 0.05 - € 0.10 - € 0.20 = DISABLED
€ 0.50 - € 1.00 - € 2.00 = ENABLED
(*) The Hopper (primary) is placed at the left side (watching the
machine from the front); Hopper 2 (secondary) is placed at the right side.
Set Dip-switches in HP to address 3 (all DS to OFF)
Set Dip-switches in HP2 to 4 (no. =ON, nos. 2= 3=OFF).
Restore default configuration
If any undesired variation is made, it will be possible to restore the default configuration as follows:
enter the initial menu, scroll by UP and D WN keys and choose RESTORE DEFAULT CONFIGURATION
then press K; the message DEFAULT CONFIG . RESTORED will be displayed.
NOTICE: t e RESTORE DEFAULT CONFIGURATION command restores t e default PIN code (0000) .
7.2 System connections
7.2.1 M ODELS WITH SEPARATE P OWER BOX AND H UB PCB
POWER IN = from Concentrator Hub: +12/24 and CCTALK 4 pin [1=24 , 2=12 , 3=GND, 4=CCT]
P1 = OK PUSHBUTTON 2x3 pin [Pin 1=MICROS. N.O. (white), Pin 2=LED R (red), Pin 3=+12 ,
P2 = SEL- PUSHBUTTON Pin 4=. LED B (blue), Pin 5=GND (black), Pin 6=LED G (green)]
P3 = SEL+/LANGUAGE
TTL1 = to POS Terminal 4 pin [Pin 1=GND, Pin 2=RX, Pin 3=TX, Pin 4=+12 ]
PROG = connector for remote programming keypad 5 pin (not connected, for K-P3N-000006 keypad]
From POWER SUPPLY BOX
To socket
POWER IN / CCT
of CPU pc board
To NOTE
ALIDATOR
To COIN
ACCEPTOR
To the
HOPPERS
To CARD/KEY
READER
1
1
1
HUB CONNECTORS
CMS ARM PCB CONNECTORS
“ Full ” CHANGEONE CMS PCB
Note: the machines that are
not expressly requested
with the predisposition to
host the POS Terminal are
equipped with the CMS
Light p.c. board, which
does not include the TTL,
MDB/RS485, and TST
sockets

7.2.2 M ODELS WITH MP1 P OWER M ODULE AND INTEGRATED H UB PCB
TTL1 = to the POS Terminal
SOCKETS IN CHANGEONE CMS PCB
PWR IN/CCT = from the Hub pcb
(in the MP1 Power Module):
+24 / +12 / GND / CCTALK
P1 = OK PUSHBUTTON
P2 = SEL- PUSHBUTTON
P3 = SEL+/LANGUAGE PUSHBUTTON
PROG = socket for the optional K-P3N-000006
external programming keypad
SOCKETS IN HUB PCB (ON INTEGRATED MP1 POWER MODULE)
PWR IN/CCT socket on
ChangeOne CMS pcb
BANKNOTE
READER
HOPPERS
KEEPER
top sign
GSM-GPRS
HERMES
MODULE
ACS RFID
READER
Pin 1 = grey wire
Pin 2 = red wire
Pin 3 = yellow wire
Pin 4 = blue wire
Pin 5 = black wire
Pin 6 = green wire
Pin 1 = green wire
Pin 2 = yellow wire
Pin 3 = black wire
Pin 4 = white wire
From MP1
Power Module
“ Full “ CHANGEONE CMS PCB
“
HUB PCB FOR CONNECTION OF THE
PERIPHERAL UNITS
5 pin (not connected)
Coin tray
LED strip
Anti-Tamper switch
(only with Hermes Module)
COIN
ACCEPTOR

7.2.3 I NSTALLING THE POS T ERMINAL :
Depending on the type of P S that the machine has been requested, the relevant interface with
cable is provided among the accessories (find it inside the cashbox):
IF for VP S Touch Nayax
IF for W RLDLINE VALINA
IF for PAYTER
Connect the 4p end of the P S Interface
cable to the TTL1 socket of the main pcb.
Connect the 40p end of the P S Interface
cable and the aerial as indicated
Connect the 40p end of the P S Interface
cable and the aerial as indicated
Connect the black 6p (MDB) end and the
Ethernet connector (LAN) of the P S
Interface cable as indicated.
Connect the white 6p (MDB) end and the
Ethernet connector (LAN) of the P S
Interface cable as indicated.
Start the Service Menu: 1. go to “Peripheral Units Setup” and confirm (see 7.2.1 and 7.2.5);
2. go to “Set up Dispensing Mode” and confirm (see 7.2.5.C);
3. set to “T KENS” and confirm;
4. set values of Tokens in the Hopper;
5. set to “AUT MATIC M DE” or “MANUAL M DE”;
6. if the Automatic mode has been chosen, it is necessary to enable and
program the “Pay-out Table”; if desired, the “Pay-out Table” can be enabled
also for the Manual Mode, so that P S-purchases will obey to its settings;
7. set hopper Level Sensors and confirm;
8. the display will return to “Set up Dispensing Mode”;
9. go to “Enable/Disable P S”, and ENABLE P S;
10. select type: NAYAX, or VALINA, or PAYTER, and confirm;
11. exit the Menu.
NAYAX 3G
NAYAX ONYX
WL VALINA
PAYTER
Aerial
IN
6p
IN
LAN
IN
6p
IN
LAN
IN
Aerial
IN
40p IN
40p IN
Aerial IN

BONUS
Menu functions
7.2.1 S URFING THE M ENU :
To enter the menu and to navigate it, keep continuously pressed the 3 buttons (“OK”,
“+” / “-“) behind the display for 5 seconds.
“OK” confirm selection
“+” / “-“ navigate menu UP and DOWN; or, modify figures and letters
MENU MAIN STRUCTURE
CHANGEONE
Promo
SHOW PERIPHERAL
UNITS
EXIT
MENU
PERIPHERAL
UNITS SET UP
EXIT
MENU
ENABLE./DISABLE
REMAINING
CREDIT
RESTORE DEFAULT
CONFIGURATION
RESET
ACCOUNTS
Notice: PIN is requested
to access some sub-menu
settings.
SHOW
ACCOUNTS
MANUAL REFILL
SETUP
EMPTY OUT
HOPPER
(*) Bonus is only available
with HopperOne S11, and only
if the achine DISPENSING
MODE is preset for:
TOKENS
or TOKENS + RETURN
CHANGE
MODIFY PIN PROMO
LANGUAGE
SETUP
(*)

All Totals
cancelled
Enter PIN
7.2.2 S HOW P ERIPHERAL U NITS
This menu allows to check the state of the PERIPHERAL UNITS , for instance:
7.2.3 SHOW ACCOUNTS
This menu allows to check the total and the partial values of cashed and paid amounts.
(*) Reset of the remaining credit: see section 7.3.13
- Press K: the display will show the total amounts introduced (T TAL I N ). Press UP, and K if
you want to exit the A CC UNTS menu.
- r else, press D WN to check the total amounts dispensed (T TAL UT ).
- Press D WN to go on browsing the submenu.
Notice: whenever the Partial A ounts records get cancelled (see section 7.2.4), the previous value recorded in
“Last Partials cancelled” gets replaced by the a ount that has just been reset.
LAST AMOUNT DISPENSED: when the board is in stand-by condition, it is possible to check the last amount
dispensed, by holding the SELECT pushbutton for full 4”.
7.2.4 R ESET ACCOUNTS
To use this sub-menu it is necessary to digit the PIN code. This function allows to cancel the
account records (both paid out and cashed in) of the machine.
For each of the 4 digits of the
PIN, use UP and D WN to
highlight the figure wanted, then
confirm by K. At the end, the
display will show:
nce entered the PIN,
the display will show:
(*) Whenever the Partial A ounts records get cancelled, the
previous value recorded in “Last Partials cancelled” gets
replaced by the a ount that has just been reset.
Exit
(*)
Reset
Partial Amounts
C OIN ACCEPTOR
DISCONNECTED
HOPPER 1
EMPTY NOTE VALIDATOR CONNECTED
SHOW
ACCOUNTS
RESET
ACCOUNTS
RESET
ACCOUNTS
(*)
Remained Credit
Paid 00,00 €
All Partials
cancelled
Exit
Reset Total
Amounts
Exit
Cas less Total
00,00 €
Last partials
cancelled
Partials out
00,00 €
Partials in
00,00 €
Total out
00,00 €
Total in
00,00 €
PLEASE NOTE: w en re-configuring t e unit from token dispenser to coins dispenser, always activate RESTORE DEFAULT
CONFIGURATION and t en RESET ACCOUNT RECORDS.
If not done, memory of t e bonus given would distort t e audit.
Reset Residual
Credit Paid
Residual payment
cancelled
IN: 00,00 €
OUT: 00,00 €

Set up Hopper 1 :
2,00 €
7.2.5 S ETTING UP THE PERIPHERAL UNITS AND THE POS
This menu allows to set up the denominations accepted by the note validator and by the coin
acceptor, as well as the value of the coins/tokens dispensed. It also permits to set the change mode
as either automatic or manual, and to enable/disable the full/void sensors of the hoppers.
(*)
Single-coin opper, menu set to dispense TOKENS
POS Enable/disable option available, P S terminal functioning
Pay-out Table Available after choosing the Automatic Dispensing Mode in the Menu
Single-coin opper, menu set to dispense COINS Multi-coin opper, menu set to dispense COINS
POS Enable/disable option not available, P S
not working
POS Enable/disable option not
available, P S not working
Pay-out Table
A
vailable in the Menu
for Change functions
Pay-out Table
Not available in the Menu
P ERIPHERAL UNITS
SETUP
EMPTY OUT
HOPPERS
Set up
Cas less Set up Dispense mode
Set up
TOKEN+RET.CHG
Set up
TOKENS
Set up
COINS
2,00 < 1,00> 0,50
NO OK OK
< 2,00 > 1,00 0,50
NO OK OK
Set up
Coin acceptor
Set up
GSM / GPRS
2,00 < 1,00 > 0,50
OK OK OK
< 5 > 10 20 50 100
NO OK OK OK OK
5 < 10 > 20 50 100
NO OK OK OK OK
< 5 > 10 20 50 100
OK OK OK OK OK
Set up
Note validator
Exit
5 10 < 20 > 50 100
OK OK OK OK OK
5 < 10 > 20 50 100
OK OK OK OK OK
Set up Hopper 2 :
1,00 €
Dispensing mode
MANUAL / 2P
(*) Press OK, then
Down or
Up to odify
a ounts by steps of
0,01
€ each, then again
OK to confir and
ove to Hopper 2.
GBP starts fro 2p .
Level sensors
enabled
Enable / Disable
POS
Data / Ora
-
>>>>>> Enabling POS
will make COINS option
unavailable!
(
*
*)
Payout Settings
Enabled / Disabled
(**) Press Down/Up to
choose POS type (Nayax,
Payter, Valina), then press
OK to confir .
(***)
(*)
Dispensing mode
AUTOMATIC
Enable ?
Yes
Select POS
Nayax / Valina / Payter
Level sensors
disabled
(***) available if and only if "TOKENS" or
"TOKENS + RETURN CHANGE" is set, in
co bination with "AUTOMATIC MODE”.
When enabling and setting the Pay-
out Table,
token purchases by POS will obey such
settings even if the enu is set to operate in
MANUAL MODE”.
Press
Down/Up to enable or disable the Pay-out
Table, then press OK to confir .
< 2,00 > 1,00 0,50
OK OK OK
2,00 1,00 < 0,50 >
OK NO OK
See sect.
7.2.5.B.i
COIN option is not
available when POS
is enabled!

Set up Hopper 1 :
2,00 €
7.2.5.A N OTE V ALIDATOR SETUP
All the programmed note values get automatically enabled at power-on. To modify acceptance,
press K to get to the first option (ex. 5 €) and highlight it, then press UP or D WN to reverse
its state. Press K to shift to the next option (ex. 10 €).
7.2.5.B C OIN S ELECTOR S ETUP
The board automatically detects the presence of the coin selector during initial check. Among the
accepted coins (0.05-to-2 €), the following ones get enabled by default: 0.50 € - 1.00 € - 2.00 €.
To modify this condition, press K to get to the first option (ex. 2 €) and highlight it, then press
UP or D WN to reverse its state. Press K to shift to the next option (ex. 1 €)
7.2.5.C D ISPENSING M ODE AND POS S ETUP
Allows to choose whether to dispense C INS or T KENS or T KENS +C HANGE , and whether the
DISPENSING M DE will be AUT MATIC or MANUAL . The values in the hoppers are set by this sub-menu.
It also permits to monitor the level of the coins in the hopper(s) by the electronic sensors.
(*)
Set up
Coin acceptor
2,00 1,00 < 0,50 >
OK NO OK
OK
OK
2,00
OK
0,50
OK
5 < 10 > 20 50 100
OK OK OK OK OK
5 10 < 20 > 50 100
OK OK OK OK OK
Set up
Note validator
5 10 20 50 < 100>
OK OK OK OK OK
<5 > 10 20 50 100
OK OK OK OK OK <5 > 10 20 50 100
NO OK OK OK OK
Set up
Dispense mode
Set up
TOKEN + RET.CHG
Set up
TOKENS
Set up
COINS
Set up Hopper 2 :
1,00 €
Dispensing mode
MANUAL 1P
(*) Press OK, then
Down or
Up to odify
a ounts by steps of
0,01
€ each, then again
OK to confir and
ove to Hopper 2.
Max. value for tokens
= 2,70 €.
Level sensors
enabled
Enable / Disable
POS
>>>>>> Enabling POS
will make COINS option
unavailable!
Enable the Pay
-
out Table
for the POS in the
AUTOMATIC Mode,
even if the Manual Mode
will be used.
(**) Press Down/Up to
choose POS type (Nayax,
Payter, Valina), then
press OK to confir .
(**)
Payout Settings
Enabled / Disabled
(***) available only if
the "TOKENS" option or
the "TOKENS +
RET
URN CHANGE"
option is activated.
(*
*
*)
(*)
Dispensing mode
AUTOMATIC
Enable ?
Yes
Select POS
Nayax / Valina / Payter
Level sensors
disabled
<LEV1 HP1 HP2>
0,00€ 0 0
(*****) Setting of the
Pay
-out Table: see section
7.2.5.C.i in next page.
(*
***
*)
Dispensing mode
MANUAL 2P
(****)MANUAL 1P: choose the paying
hopper by SEL, and confir by OK.
MANUAL 2P: press the button of the
paying hopper desired.
(*
**
*)
2,00 < 1,00> 0,50
NO OK OK
< 2,00 > 1,00 0,50
OK OK OK
< 2,00 > 1,00 0,50
NO OK OK

7.2.5.C.i S ETTING THE P AY - OUT T ABLE (only available in Automatic Mode)
When the Pay-out Table is enabled, the perator can configure 8 different co binations of
change, each of them related to the amount introduced by the User.
The LEVEL box can be set to a determined amount (typically, the accepted coin and note
denominations), while the relevant HP1 and HP2 values can be set to:
- number of pieces so that their calculation sums up to the amount set in the LEVEL box, if
change in cash is handled;
- any desired value, if Tokens only will be handled - this will allow for awarding bonus as
well. If accu ulation of credit (to reach the bonus level) is necessary, please set the
Dispensing Mode to MANUAL.
- any consistent combination, if Tokens and return change will be handled.
When choosing to enable the Pay- ut Table, the display will prompt you to set the payout
combination for the first level available (LEV1). To set it up, highlight LEV1 by “ K” and
set its value by the “+” button, then confirm by “ K”. The cursor will shift to the HP1 box:
confirm by “ K”, and set its value by the “+” button (modify by “-“), then confirm by “ K”,
and do the same for HP2. When confirming the value in HP2, the chosen combination for
LEV1 will be shown.
Step from LEV1 up to LEV2 by “+”, highlight LEV2 by “ K”, and repeat above process.
OPERATION AFTER SETTING THE PAY-OUT TABLE:
when the User will insert oney corresponding to any of the progra ed levels, the
achine shall pay out the co bination of pieces that the Operator has pre-progra ed for
the a ount inserted by the User (see section 6.1.A).
SETTING THE PAY-OUT TABLE:
Let us assume that HP1 has been set to 1 €, and that HP2 has been set at 0,10€.
Press K when prompted by the message “Set up Token/Change-Enable” to
confirm that you want to set the Pay-out Table. Level 1 will be shown:
LEVEL 1: Press “ K”, then by the “+” key set LEV1 to the first denomination that you want to
accept, for instance 0,20€. Confirm by “ K”; the display will automatically set HP2 = 2, i.e. two
0,10€ coins would be paid against 0,20€.
Confirm until you get: Take care: “<LEV 1 HP1 HP2>”,
not “<LEV1> HP1 HP2”!
PRESS “+” F R LEVEL 2 (or PRESS REPEATEDLY “+” T EXIT).
LEVEL 2: By “ K”, confirm LEV2. By “+”, set LEV2 to 0,50€ and confirm. HP2 will
automatically set to 5 pieces. Confirm until “ <LEV 2 HP1 HP2>” (not “<LEV2> HP1 HP2” !)
shows again.
PRESS “+” F R LEVEL 3 (or PRESS REPEATEDLY “+” T EXIT).
LEVEL 3: By “ K”, confirm LEV3.
By “+”, set Level 3 to 1,00€ and confirm. HP1 will automatically set to 1 piece (1€).
By the “-” button, change HP1 to 0 and press K; by the “+” button, set HP2 to 10 (10x0,10€)
Confirm until <LEV 3 HP1 HP2> shows again.
PRESS “+” F R LEVEL 4 (PRESS REPEATEDLY “+” T EXIT).
<LEV1> HP1 HP2
0,00€ 0 0
<LEV1 HP1 HP2>
0,20€ 0 2
NOTICE:
onitoring of level sensors is disabled by default. This eans that the board does not know when the
hopper is e pty, so it will send the pay-out co and even if there are no coins available. When the hopper runs
out of coins during dispensing or at the end of pay ent, no warning will be displayed. If the e pty state is detected
when powering the unit, this one shall not accept any oney.
If the onitoring has been enabled, and there are not enough coins in the hopper, the display will warn that the
hopper is e pty, even though there are always about 20 coins available, so as to co plete large change payout.

LEVEL 4: By “ K”, confirm LEV5.
By “+”, set Level 4 to 2,00€ and confirm. HP1 will automatically set to 2 pieces (2 x 1€).
You can set the pay-out table so as dispense any of the following combinations: (A) 2x1€ coins,
or (B) 1x1€ + 10x0,10€ coins, or else (C) 20x0,10€ coins.
Suppose choosing the combination (C): by the “-” button, change HP1 to 1 (1x1€ coins) and
press K. By the “+” button, set HP2 to 10 (10x0,10€)
Confirm until <LEV 4 HP1 HP2> shows again.
PRESS “+” F R LEVEL 5 (PRESS REPEATEDLY “+” T EXIT).
LEVEL 5: By “ K”, confirm LEV4.
By “+”, set Level 5 to 5,00€ and confirm. HP1 will automatically set to 5 pieces (5 x 1€).
You can set the pay-out table so as dispense any of the following combinations: (A) 5x1€ coins,
or (B) 1x1€ + 40x0,10€ coins, or (C) 2x1€ + 30x0,10€ coins, or (E) 3x1 + 20x0,10€ coins, or (F)
4x1 + 10x0,10€ coins, or else (G) 50x0,10€.
Suppose choosing the combination (F): by the “-” button, change HP1 to 4 and press K; by the
“+” button, set HP2 to 10 (10x0,10€)
Confirm until <LEV 5 HP1 HP2> shows again.
PRESS “+” F R LEVEL 6 (PRESS REPEATEDLY “+” T EXIT).
LEVEL 6: By “ K”, confirm LEV6.
By “+”, set Level 6 to 10,00€ and confirm. HP1 will automatically set to 10 pieces (10 x 1€).
You can set the pay-out table so as dispense any of the following combinations: (A) 10x1€ coins,
or (B) 9x1€ + 10x0,10€ coins, or (C) 8x1€ + 20x0,10€ coins, or ... (N) 5x1 + 50x0,10€ coins, and
so on.
Suppose choosing the combination (B): by the “-” button, change HP1 to 9 and press K; by the
“+” button, set HP2 to 10 (10x0,10€).
Confirm until <LEV 6 HP1 HP2> shows again.
PRESS “+” F R LEVEL 7 (PRESS REPEATEDLY “+” T EXIT).
LEVEL 7: By “ K”, confirm LEV7.
By “+”, set Level 7 to 20,00€ and confirm.
You can set the pay-out table so as dispense any of the following combinations: (A) 20x1€ coins,
or (B) 19x1€ + 10x0,10€ coins, or (C) 18x1€ + 20x0,10€ coins, or … (M) 16x1€ + 40x0,10€, or
... (N) 5x1 + 50x0,10€, and so on. Suppose choosing the combination (M): by the “-” button,
change HP1 to 16 and press K; by the “+” button, set HP2 to 40 (40x0,10€).
Confirm until <LEV 7 HP1 HP2> shows again.
PRESS “+” F R LEVEL 8, R PRESS K UNTIL EXITING.
NOTICE: onitoring of level sensors is disabled by default. This eans that the board does not
know when the hopper is e pty, so it will send the pay-out co and even if there are no coins
available. When the hopper runs out of coins during dispensing or at the end of pay ent, no
warning will be displayed. If the e pty state is detected when powering the unit, this one shall
not accept any oney.
If instead the onitoring has been enabled, and there are not enough coins in the hopper, the
display will warn that the hopper is e pty. There will usually re ain 20 coins approxi ately, so
as to co plete the change payout.
PLEASE PAY ATTENTION: if t e mac ine must be re-configured from Tokens (or
Tokens + returned c ange) dispenser to Coin c anger, always do reset to DEFAULT
CONFIGURATION and RESET ACCOUNTS. Else, t e bonus setting could produce
Accounts inconsistency.