ALC Observer AWS3266 User manual

Wireless Made Simple.
7" Connected
Touch Screen Wireless
Surveillance System
Remote Monitoring Anytime from Anywhere
QUICK START GUIDE
Model AWS3266

Phillips head screwdriver or drill
may be required for installation
Passive
Infrared Sensor
Infrared
LED sensors
Antenna
Multi-position
Camera Stand
Thumb screw
Camera Stand
T-Bolt
7” Touch screen
Control Panel
Docking station
with Internet cable
(2) Outdoor cameras with
multi-position stands
(3) AC power adapters
(2) power extension cords
One 4 GB SD card
(2) Camera installation
screw packs
Quick Start Guide
x3
x2
7”
x2
IN THE BOX
x2
Internet
(Ethernet) Cable
Connection
AC Power Input
(AC power cable included)
Let’s Get Started
Model AWS3266
7” Touch Screen Control Panel Docking Station Indoor/Outdoor Camera
Tip: Plan the location of your cameras for optimal viewing and
proximity to AC Power outlets, (2) power extension cables are included
NOTE: Avoid installing in a location which requires the wireless
signal to pass through cement, concrete and metal structures. This
will reduce the transmission range.
AC Power cord
In-line Pairing
Button
Pull out Stand
Antenna
Reset button
Power (On/Off)
SD Card Slot
AC Power Connection
4 GB
Quick Simple
Set Up
Tools

REMOTE VIEWING RECORDING FROM SMART DEVICE + CONTROL PANEL
MOTION RECORDING
FROM CONTROL PANEL
NOTE: When the Control Panel monitor is placed in the docking
cradle and “CHARGE ONLY” is selected, you can still access your live
video from smartphone(s) or tablet(s) as long as those devices are
also connected to the same network as the monitor.
1
2
From your smart device, DOWNLOAD and
INSTALL the ALC Observer App.
Plug in the Docking Station and connect Ethernet Internet
cable between the docking station and your router. Make sure
your smart device is connected to the same Wi-Fi network.
Open Observer App and tap + Camera icon
Select AWS3266
Tap NEXT on your smart device and you will see SCANNING
icon on screen and the App will search for AWS3266.
Observer
3
4
5
6
7
Enter the NAME of the system. The PASSWORD is pre-loaded to a
default password. Tap COMPLETE and your system now added.
1From Pop-Up menu, tap the following icons
2Tap the camera’s Sensitivity to OFF, PIR, LOW or HIGH (default is PIR).
3To set up EMAIL ALERT, tap the following icons from the pop-up menu,
ll in the information elds and tap OK to save,
then < to return to the previous screen.
FREE APP DOWNLOAD
FROM SMART DEVICEFROM SMART DEVICES
1From LIVE VIEW , Tap CAMERA Icon to capture screen
images from camera selected. Snapshots will be saved to
camera roll of your mobile device.
2Tap RECORD icon to save video to the system’s SD Card.
Press record again to stop recording.
LIVE VIEW
System 1 (Live Video)
Connected
640x480
P2P, No1, 12.67FPS
Tap the GLOBE icon to view active cameras.
For detailed installation and setup, please refer to the Model
AWS3266 complete User’s Guide available on our website:
www.atomslabs.com/support
SCAN
TO VIEW
COMPLETE
USER’S GUIDE
AtomsLabs.com
Wireless
Made Simple.
NOTE: Do not submerge in water, monitor near water. STRANGULATION HAZARD: Infants have STRANGLED in power cords.
Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce
the risk of re, electric shock and injury to persons. Illustrations are for reference only. Actual product specications may vary.
For additional precautions and product information, please see owner’s manual at www.atomslabs.com/support
1
2
3
PAIRING ADDITIONAL
CAMERAS TO CONTROL PANEL
The AWS3266 Wireless Surveillance System supports up to four
(4) wireless surveillance cameras. Use the following steps to pair
each additional camera.
From the Main Menu on the Control Panel,
select the CAMERA SET UP icon
Select camera
station to
be paired
Tap the CAMERA STATION you want to pair;
a 60-second timer will start.
Within 60 seconds, press the PAIRING KEY once on the camera’s
power cord. The timer will stop when the camera is paired.
Go to Home Screen to view live cameras on the Control
Panel Monitor.
AC power cable
Camera In-line
Pairing Button
Ceiling Mount
Surface Mount
CAMERA MOUNTING
NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is
recommended to install camera under shelter to protect from direct exposure to
sunlight and other environmental elements. Avoid pointing a camera directly at any
bushes or tree branches or objects that may naturally move due to winds.
1 2 43
x3 x4
EXPANDABLE up to 4 cameras
Ask your retailer for accessory cameras
(Model AWSC36) compatible with this system.
Secure the multi-position
camera stand to a stable
surface, ceiling or wall.
Loosen the T-Bolt on the camera
stand and adjust viewing angle using
the Thumb Screw to rotate position.
Align hole on bottom of camera
with T-Bolt to install camera.
Screw antenna into rear of camera.
Attach power cable to power
extension cord AC Adapter.
Plug into electric outlet.
CAMERA INSTALLATION + SETUP
DOCKING STATION
AC power cable Included Ethernet Cable
Internet Router (not included)
CONTROL PANEL SETUP
5
6
8
7
Connect the AC/DC adapter to the power input on the back
of the Docking Station and plug into an electrical outlet.
Place Control Panel onto the Docking Station and extend
the antenna. Press and hold the POWER button on the top of
the monitor for 3-4 seconds until screen illuminates.
The CAMERA(s) installed and plugged in will AUTOMATICALLY APPEAR
on the Control Panel monitor, with or without Internet cable connected
to a wireless network router.
For remote viewing on smart devices, the Control Panel must be
connected to Internet. Plug one end of the provided cable into back of
Docking Station and the other end into an Ethernet port on router.
To prepare for RECORDING, insert the SD card provided into the
SD card slot on right side of the Control Panel. Most SD card brands
are supported up to 32 GB. The SD Card status icon on Control Panel
will indicate proper installation.
SD Card
Status
Battery
Status
Internet Connection
status
Recording
Status
Camera Number
Signal Status
On-screen Display

ONE-YEAR LIMITED WARRANTY
IMPORTANT: Evidence of original purchase is required for warranty service.
WARRANTOR: Atoms Labs LLC (“ALC”) ELEMENTS OF WARRANTY: The ALC warranty covers the product for one (1) year
from the documented date of purchase. The purchase date must be documented with either an original sales receipt from the
rst retailer selling the product or by credit card receipts or statements.
WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months after the date
of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B)
modied, altered, or used as part of any conversion kits, sub-assemblies, or any congurations not sold by ALC, (C) improperly
installed, (D) serviced or repaired by someone other than an authorized ALC service center for a defect or malfunction covered
by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by ALC, or (F)
installed or programmed by anyone other than as detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: If the product is under warranty, ALC will either, at its option, repair or replace the defective unit &
return it to you without charge for parts, service, or any other cost. ALC, at its option, may replace the unit with a new or
refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT
& IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE
FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow
this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specic legal rights, & you may also have other rights which vary from state to
state. This warranty is void outside the United States of America & Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s manual you
are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). The Product should
include all parts & accessories originally packaged with the Product. Include evidence of original purchase & a note describing the
defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:
Atoms Labs, LLC
1040 Trade Avenue Customer Support: 844-767-8544
DFW Airport, TX 75261 9:00 am to 6:00 pm (CST)–Monday through Friday
ALC appreciates your support and feedback! If you come across software bugs or ways we could improve our products,
we would love to hear about them! Please email us at [email protected] and you will hear back from us within
(2) business days.
FCC Compliance Statement: This device complies
with Part 15 of the FCC rules. Operation is subjected
to the following two conditions: (1)this device may not
cause harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
Products with CE Marking comply with EMC Directive
(2004/108/EC); Low Voltage Directive (73/23/EEC);
R&TTE (1999/5/EC); ROHS Directive (2011/65/EU) issued by the
Commission of the European Community. Compliance with these
directives implies conformity to the following European Norms:
EMC: EN 301 489 LVD: EN 60950 Radio: EN 300 328
If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid
statutory regulations. Disposal of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent
batteries/accumulators with common household waste is prohibited! Batteries/accumulators that contain hazardous
substances are marked with the symbols on the side. These symbols indicate that it is prohibited to dispose of these
batteries/accumulators in the household waste. The abbreviations for the respective heavy metals are: Cd=cadmium,
Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be charged to the
designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following
these instructions will allow you to fulll the legal requirements and contribute to the protection of our environment!
Use of audio or video equipment for recording the image of a person without their knowledge and consent is prohibited in certain states or
jurisdictions. The end-user assumes all liability for compliance with applicable state, local and federal laws. Wireless cameras require a wired
connection to AC power outlet. Network conditions and environmental factors can adversely affect wireless signal range. Actual night vision range
and image clarity depends on installation location, viewing area and light reection / absorption. Lithium-ion battery must be recycled or disposed
of properly. Lithium-ion battery must be recycled or disposed of properly. Photography and illustration may differ slightly from actual product.
©2014 Atoms Labs LLC, All rights reserved. iPhone, iPad, iPod Touch, and App Store are registered trademarks of Apple, Inc. Chrome and
Android are registered trademarks of Google, Inc. Certain other product names, brand names, and company names may be trademarks or
designations of their respective owners.