Alcochem Hygiene i-trap 50B User manual

*1 Starter/starter holder (not applicable for units executed with a high frequency ballast or LED lamps)
*2 i-trap 50 B unit is executed with a magnetic ballast (with starter)
i-trap 50 E unit is executed with a high frequency ballast. (without starter)
i-trap 50 LED unit executed without ballast or starter.
Designed in the Netherlands - Made in China
Certication and declaration
The i-trap 50B/E / i-trap 50LED complies with the EU-directive on machine safety
The unit and spare part components are in full compliance with the CE directive and
the WEEE / RoHS directives.The EC declaration of conformity is listed below:
CE declaration of conformity.
We declare, under our responsibility, that the imported product:
Type: i-trap 50B/E / i-trap 50LED Insect control unit complies with the following European standards:
* EN 60335-1 Safety of household and similar electrical equipment. Part 1: General requirements.
* EN 60335-2/59 Safety of household and similar electrical appliances.
Part 2: Particular requirements for insect killers.
* EN 55014 Limits and methods of measurement of radio disturbance characteristics
of electrical motor-operated and thermal appliances for household and similar
purposes, electrical tools and similar electric apparatus.
* EN 61000-4-5 Surge immunity requirements (1.2/50 µs and 70/100 µs surge)
* EN 61000-3-2 Electromagnetic compatibility (EMC) Part 3: Limits Section 2: Limits for harmonic
current emissions (equipment input current <16 A per phase) (IEC 1000-3-2:1995)
All according to the definition of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC
• The appliance is not to be installed by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Children must be supervised and not to play with the appliance.
• The appliance is to be kept out of reach of children.
•Theapplianceisnottobeusedinlocationswhereammablevapoursorexplosivedustsarelikelytoexist.
•Ifthepowercordisdamaged,itmustbereplacedbythemanufacturer,itsserviceagentorqualiedand
licensed electrician in order to avoid a hazard.
Extra attention on the UV Astron LED lamp
The UV Astron LED lamp is developed to guarantee a long a trouble-free lifetime.
The UV Astron LED lamp needs to be cleaned periodically (ideally 4 times per year).
AstheUVAstronLEDlampsbecomewarmerthantheconventionalUVuorescentlamps,theyattract
more dirt and organic particles on its surface.
These particles block the UV-A light, which will affect the attraction potential of the UV Astron LED lamp.
Cleaning them with a soapy detergent is therefore essential.
Important warnings
Attention
•indoor use only
•for dry areas only
•recycle lamps & starter
Exploded view
Descriptions of exploded view parts see section B
Recommended Consumables
Pos. Description Part number Amount
3 Glueboard 2.06.0100 1
5i-trap 50B execution Philips 15 watt UV-A SP 2.04.0690 2
5i-trap 50Eexecution Philips 15 Watt UV-A SP Longlife 2.04.0322 2
5i-trap 50LED execution Astron 15 Watt UV-A LED 2.04.5000 2
7 Starters*1 2.08.1001 1
i-trap 50B/50E - i-trap 50 LED instruction manual version 2.0
Position:
1 Cover
2 Housing
3 Glueboard
4 Ballast*2
5 UV-A Lamp
6 Lamp holder
7 Starter*1
8 Main plug
9 Indicator (50E + LED)
ENGLISH
i-trap 50B/50E
i-trap 50LED
INSTRUCTION MANUAL

1x glueboard
1x starter (50B only)*
2x 15 watt UV-A
Consumables:
360 mm Center to Center
xxxxx xx x
± 35 mm
0 8
2
1
3
CLICK
CLICK
CLICK
Technical name : i-trap 50B/50E insect control system
Attraction grid : increases landing behaviour with 30%
Area coverage : 50 - 80 m2
Light source : 2x 15 watt shatterproof UV-A lamps
TypeofUVlamps :UVLampsRoHScertied
Electrical supply : 50B: 220-240V ~ 50 Hz - 50E: 110-240V ~ 50/60 Hz
: 50LED 100-240 V ~ 50-60 Hz
Catchspecications :TemperatureOptimizedGlueboard
Power consumption : 50B: 35W / 50E: 32W / 50LED: 23 W
Weight : 4 kg
Material : coated steel, cover and grid made of ABS plastic
Degree of protection : IP 20 (drip proof)
Guarantee : 2 year return to base
Int. building norm : acc. EN 60335-2-59 int. std. for insect traps
Lamp life time (h) : 50B/50E 9.000 hours - 50LED 25.000 hours
Dimensions : 470 x 325 x 100 mm (LxWxH)
CE-approval : yes
Mounting position : wall mounted
Cable : included
7
6
6
5
2
1
8
3
4
B. Exploded view (see explanation on back of this manual)
* 50 B is executed with a magnetic ballast and starter circuit.
50 E is executed with a high frequency ballast (no starters).
50 LED is executed without ballast and starters.
Note: In case of replacement of the lamps use components of the same specifications.
Only use genuine spare-parts for service and maintenance.
9
2
Note:
In case of replacement of
the glueboard or lamp, use
components of the same
specifications.
Only use genuine spare parts
for service and maintenance.
LED
This lamp is suitable to be
used in emergency luminaires
designed for double-capped
fluorescent lamp(s)
1x i-trap 50B/50E or 50 LED
A. Unit / Consumables
E. Lamp installation/replacement
C. Removing/placing Covergrid
D. Wall mounting
F. Glueboard install/replace G. Specifications of the i-trap 50B/50E or 50 LED