Alcochem Hygiene X-TRAP 50 User manual

(standard on LED unit)
Warning:
• The X-trap 50 can only hold the Conventional 15 Watt UV lamp (shatterproof lamp)
• The X-trap 50 LED can only hold the 15 Watt LED lamp (shatterproof lamp)
• The 15 Watt LED lamp has only one live side and need to be placed in the correct way (see lamp holder)
• For indoor use only
• For dry areas only
• Recycle lamps & glue board
Exploded view See section B
ENGLISH
X-trap instruction manual version 1.6
Pos. Description
1 Cover
2 Housing
3 Glueboard
4 Ballast (only x-trap 50)
Pos. Description
5 UV-A Lamps
6 Lamp holder
7 Main plug
8 Inlay covers
Certication and declaration
The x-trap 50 / x-trap 50 LED complies with the EU-directive on machine safety
The unit and spare part components are in full compliance with the CE directive and
the WEEE / RoHS directives.The EC declaration of conformity is listed below:
CE declaration of conformity.
We declare, under our responsibility, that the imported product:
Type: x-trap 50 / x-trap 50 LED Insect control unit complies with the following European standards:
* EN 60335-1 Safety of household and similar electrical equipment. Part 1: General requirements.
* EN 60335-2/59 Safety of household and similar electrical appliances.
Part 2: Particular requirements for insect killers.
* EN 55014 Limits and methods of measurement of radio disturbance characteristics
of electrical motor-operated and thermal appliances for household and similar
purposes, electrical tools and similar electric apparatus.
* EN 61000-4-5 Surge immunity requirements (1.2/50 µs and 70/100 µs surge)
* EN 61000-3-2 Electromagnetic compatibility (EMC) Part 3: Limits Section 2: Limits for harmonic
current emissions (equipment input current <16 A per phase) (IEC 1000-3-2:1995)
All according to the definition of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC
• The appliance is not to be installed by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Children must be supervised and not to play with the appliance.
• The appliance is to be kept out of reach of children.
•Theapplianceisnottobeusedinlocationswhereammablevapoursorexplosivedustsarelikelytoexist.
•Ifthepowercordisdamaged,itmustbereplacedbythemanufacturer,itsserviceagentorqualiedand
licensed electrician in order to avoid a hazard.
Extra attention on the UV Astron LED lamp
The UV Astron LED lamp is developed to guarantee a long a trouble-free lifetime.
The UV Astron LED lamp needs to be cleaned periodically (ideally 4 times per year).
AstheUVAstronLEDlampsbecomewarmerthantheconventionalUVuorescentlamps,theyattract
more dirt and organic particles on its surface.
These particles block the UV-A light, which will affect the attraction potential of the UV Astron LED lamp.
Cleaning them with a soapy detergent is therefore essential.
Important warnings
X-TRAP 50
X-TRAP 50 LED
Inlay covers, reduce the view of the glueboard

2.06.6700 - 1x glue board
2.04.0690 - 2x 15 Watt UV-A or
2.04.5000 - 2x 15 Watt UV-A LED
Consumables:
Mounting holes Drawing for mounting position included
± 35 mm
0 8
Technical name : X-trap 50 / X-trap 50 LED
Area coverage : 50 - 80 m2
Color : Anthracite grey
Light source : 2x 15 Watt UV-A lamps or 2x 15 Watt Astron LED lamps
TypeofUVlamps :UVLampsRoHScertied
Electrical supply : x-trap 50: 220-240V ~ 50 Hz / 110-240V ~ 50/60 Hz
: x-trap 50 LED 100-240 V ~ 50-60 Hz
Catchspecications :TemperatureOptimizedGlueboard
Power consumption : x-trap 50: 32 W / x-trap 50 LED: 23 W
Weight : x-trap 50: 3 Kg / x-trap 50 LED: 4 Kg
Material : Full metal chassis and plastic sides
Degree of protection : IP20 / suited for normal (dry) areas
Guarantee :2yearreturntobase
Int. building norm : acc. EN 60335-2-59 int. std. for insect traps
Lamp life time (h) : x-trap 50: 9.000 hours - x-trap 50 LED:25.000 hours
Dimensions : 538 x 311 x 103 mm (LxWxH)
CE-approval : Yes
Mounting position : Wall mounted (horizontal or vertical)
7
6
6
5
5
2
1
8
83
4
B. Exploded view (see explanation on back of this manual)
Note: In case of replacement of the glueboard or lamps, use components of the same
specifications. Only use genuine spare-parts for service and maintenance.
CLICK
A B
B
A
inlay covers for 50 LED version
inlay cover
(standard on LED unit)
ballast
(not for LED)
lamp holder glueboard
housing
15 Watt lamp or
15 Watt LED lamp
inlay cover (standard on LED unit)
cover
X-trap 50 or X-trap 50 LED
A. Unit / Replacements parts
E. Lamp installation/replacement
C. Glueboard install/replace
D. Wall mounting - in vertical or horizontal position
F. Specifications of the X-trap 50 / X-trap 50 LED