ALCYONEUS WONSEE Smart Baby Bottles User manual

1
1
Function introduction
②170ml bottle body
①Core base*1 ③Middle ring
⑤Nipple*4 ⑥Base loading tool
2
2
Product accessories
The tip function of measuring children's
temperature and abnormal temperature
Obtain intelligently mother and baby's weight
(Wonsee maternal and infant scale is necessary)
The record function of milk powder nutrition.
Recommend milk or water drinking amount and record it
accurately
Smart identification of milk warning
Avoid vomiting milk warning
Water temperature overhigh warning
7

⑧Sealing cover*1
⑨Handle*1 ⑩USB data line*1
⑫Button cell*2
⑭Manual and after-sake Card*1
⑪Constant temperature device*1
⑬Manual for materials
⑦Sucker and accessories*1
2
2
Product accessories

②
3
3
Bottle assembly
③Sucker and accessories
①Assembly of base Assembly of bottle body

3
3
Matters needing attention
1、The bottle body and its nipple can be put into the boiled water for boiling and
disinfection, the core base, handle and Middle ring thread can be scalded but not
boiled in the boiling water.
(it is strictly forbidden to soak and press the electronic base)
2、The silicone case on the core base is connected to precision electronic
apparatus, so it is not allowed to dismantle, or the factory will not be responsible
for the damages of internal main plate or accessories. The after-sale maintenance
shall not support the core base which is dismantled in private. Please contact our
company if you need any help.
3、The core base has been handled by dropping and breaking, please use it at ease!
4、output power of adapter should below 15W.

The statements should be displayed in the user manual:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user ’s authority to operate
the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for
help.
5
5
Warnings

Product Warranty Card
Product Name:_______________________ Product Mode:_______________________
Specification and Color:______________
Factory Date:_________Year___Month ___ Day
Sealed by the Manufacturer: Customer's Name:
Contact Telephone: Customer's Address:
Warranty 6
6
1、The product carries out national warranty policy, and the guarantee period is one
year.
2、In product warranty period,any damage caused by non-artificial reason will be
maintain it freely.
3、Free maintenance service shall not be provided in the following cases (not limited
to the manual damages in the following cases):
（1）Can't provide effective purchase certificate;
（2）Misuse or repair in private;
（3）Artificial damage;
（4）breakdown and damages caused by unavoidable outer factors;
（5）Damage due to device misuse like water or other liquid entering;
（6）Use mismatched power supply and voltage caused damage;
4、The product's appearance, quick-swear parts are not within the guarantee range.
Including nippe,sucker and handle, ect.
5、only the contents above are guaranteed, no other proof or tolerant guarantee
(including marketability, the responsibility and adaption for certain special and
applied tolerant guarantee), the company shall not be responsible for any special,
accidental or indirect damage whether in contract, civil losses, or other fields.
6、Service telephone: [phone]

4、Recommended milk
drinking amount and check
the record
3、 Enter into App, and set basic
parameters about the baby
Note: search “wonsee” to download APP for
installation in application mall such as
App Store, Tecent Application Treasure
and Peapod.
5
5
Software used
1、Download APP
Download software by scanning
QR Code
2、Register, log in and bind
with the milk bottle

The functions needed to
set include milk spilling
resistance tip, the tip for
ove r hig h tem p e rat u r e
during the mixing of milk ,
t h e t i p f o r a b n o r m a l
t e m p e r a t u r e , t h e t i p
r e c o r d f o r o v e r h i g h
temperature during the
m i l k m i x i n g a n d m i l k
spilling resistance can be
c h e c k e d t h r o u g h t h e
convey column.
7、Health data check
Open Health column to obtain the amount
of feeding milk for the baby, amount of
drinking water, body weight or mother's
body weight, the data of day, week, month
and year corresponding to relevant data
can be selected through +, - marks above.
The baby's body weight
c a n b e o b t a i n e d
t h r o u g h W o n s e e
m a t e r na l a nd i n f an t
scal e , o pe n A PP a n d
keep Bluetooth opened,
t h e m o t h e r s t a n d s
separately on the scale,
select the mode on the
scale and the data can
be in synthesis.
Tips: when the carr ying
baby mode is selected,
weigh the body weight
once more (the first weight is
mother's weight, and the mother carrying with baby shall be
weighed once again; or the first weighing is the weight of
mother carr ying with the baby and the second weighing is the
mother's weight).
5
5
Software used
5、Close tools 6、The measurement of
baby's body weight and
mother's weight.

3、Measurement of temperature
4、 Milk spilling resistance
The milk bottle will give beeping sound during the milk feeding in case of
any milk spilling risk through the analysis of inclined angle of the bottle
and the liquid weight.
4
4
The hardware used
2、The sensing of liquid temperature and alarm of over
high temperature
The metal round chip on the bottom of the core
base is used to touch the forehead of the baby or
skin to measure its body temperature. During the
measurement of body temperature, the matrix will
have progress bar to display, 40 seconds later, two
bleeping sounds represent the completion of the
measurement, and the matrix screen will display
the baby's body temperature. (It is forbidden to
touch metal chip during the milking feeding)
In case of over high temperature of the water, the
matrix screen displays HH in capital and alarms
beeping warning; when the temperature tends to be
s t a b l e , t h e m a t r i x s c r e e n s t a r t s t o s h o w
temperature, and the duration time is for 3 seconds.
Over high temperature The temperature
tends to be stable
loading...
1、Sensing switch
Touch the sensing switch or the bottle moves, the bottle can activate the
work, the matrix screen displays the temperature of liquid in the bottle, and
the environment temperature will display if the bottle is empty.