ALDI WORK ZONE ASP12-ES User manual

User Manual
WET & DRY VACUUM CLEANER
ASP12-ES
Contents
ALDI guarantees that our exclusive brand products are developed to
our stringent quality specications. If you are not entirely satised with this
product, please return it to your nearest ALDI store within 60 days from
the date of purchase for a full refund or replacement, or take advantage of
our after sales support by calling the supplier’s Customer Service Hotline.
Made in China
WORKZONE® is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 SARGENTS ROAD
MINCHINBURY NSW 2770
www.aldi.com.au
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AFTER SALES SUPPORT
 1300 855 831  [e-mail]
AUS
Original instructions
Vers.No. 180718
Overview 04
Utilisation 05
Pack contents/parts 06
Explanation of symbols 08
Introduction 09
Layout 10
Scope of delivery 10
Intended use 11
Safety regulations 11
Technical data 13
Assembly 14
Operation 15
Maintenance and cleaning 16
Troubleshooting 17
Storage 18
Disposal and recycling 18
Warranty Details 19
Repair and Refurbished Goods or Parts Notice 21

Contents of Box
UtilisationOverview
45Pack contents/parts 6
1 x Wet & Dry Vacuum cleaner
Castors
Suction hose
4 x
1 x
AUS
ASP12-ES
AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
Foamed plastic lter1 x
Paper bag
1 x
Additional lter
1 x
Adapter
Crevice nozzle
1 x
1 x
3-part suction tube
1 x
Instruction manual
1 x
Warranty certicate
1 x
1.3 11
12
13
1
14
5
15
16
18
17
19
1.2
3
9
10
2
5
7
314
1
7
8
3
4
3
12
5
3
16
6
613
7
11
4
10
Floor nozzle1 x
Screws
2 x
1.1 1
2
3
4
5
7
8
6

AFTER SALES SUPPORT 07
 1300 855 831  [e-mail]
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
ASP12-ES
8
15
18
19 1711

08 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
Explanation of symbols ASP12-ES
Explanation of Symbols
Read the operating instructions to reduce the risk
of injury.
Class II symbol: This high pressure cleaner is
designed with dual insulation and does not need
to be connected to an earthed power socket.
Compliance with the Australian requirements.

AFTER SALES SUPPORT 09
 1300 855 831  [e-mail]
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
Introduction ASP12-ES
I. Introduction
Congratulations on choosing to buy a WORKZONE®product.
All products brought to you by WORKZONE®are manufactured to the highest
standards of performance and safety, and as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 1Year Warranty.
We hope you will enjoy using your purchase for many years to come.
Note:
According to the applicable product liability law the manufacturer of this appliance is
not liable for damages which arise on or in connection with this appliance in case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non-authorised skilled workers,
• installation and replacement of non-original spare parts,
• improper use,
• failures of the electrical system due to the non-compliance with the electrical
specications and the Australian regulations.
Recommendations:
Read the entire text of the operating instructions prior to the assembly and operation
of the appliance.
These operating instructions are intended to make it easier for you to get familiar
with your appliance and utilise its intended possibilities of use.
The operating instructions contain important notes on how to work safely, properly
and economically with your appliance and how to avoid dangers, save repair costs,
reduce downtime, and increase the reliability and working life of the appliance.
In addition to the safety regulations contained herein, you must in any case comply
with the applicable regulations of your country with respect to the operation of the
appliance.
Put the operating instructions in a clear plastic folder to protect them from dirt and
humidity, and store them near the appliance. The instructions must be read and
carefully observed by each operator prior to starting the work. Only persons who
have been trained in the use of the appliance and have been informed on the related
dangers and risks are allowed to use the appliance. The required minimum age of
16 years must be met.

AUS
Introduction/Layout/Scope of delivery ASP12-ES
10 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
In addition to the safety notes contained in the present operating instructions and
the special regulations of your country, the generally recognised technical rules for
the operation of this appliance must be observed.
II. Layout (Fig. 1.1, 1.2, 1.3)
1 Handle
2 On/O󰀨 switch
3 Appliance head
4 Suction hose connector
5 Castors
6 Accessory holder
7 Container
8 Locking hook
9 Filter basket with safety oat valve
10 Blow connector with cable hook
11 Suction hose
12 Foamed plastic lter
13 Paper bag
14 Screw
15 Floor nozzle (for wet & dry application)
16 Additional lter
17 Adapter
18 Crevice nozzle
19 3-part suction tube
III. Scope of delivery
Wet & Dry Vacuum cleaner (1x)
Castors (4x)
Screws (2x)
Suction hose (1x)
Foamed plastic lter (1x)
Paper bag (1x)
Additional lter (1x)
Adapter (1x)
Crevice nozzle (1x)
3-part suction tube (1x)
Floor nozzle (1x)

AUS
ASP12-ES Scope of delivery/Intended use/Safety regulations
AFTER SALES SUPPORT 11
 1300 855 831  [e-mail]
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
Warranty Certicate (1x)
Manual (1x)
• Open the packaging and take out the appliance carefully.
• Remove the packaging material as well as the packaging and transport bracing
(if available).
• Check that the delivery is complete.
• Check the appliance and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.
m Attention!
The appliance and packaging materials are not toys!
Children must not be allowed to play with plastic bags, lm and small parts!
There is a risk of swallowing and su󰀨ocation!
IV. Intended use
The appliance is intended for domestic wet and dry vacuuming in, for example, the
house, work room, car or garage. It is intended for hard oors, tiles, oorboard and
carpets. This appliance is not suitable for commercial use. Commercial use will inval-
idate the guarantee.
Vacuuming of ammable or explosive materials or those which endanger health is
prohibited. The manufacturer will not be held responsible for injuries resulting from
use which does not comply with the directions, or from incorrect use.
V. Safety regulations
m Caution! When using power tools, observe the following basic safety meas-
ures for the prevention of electric shocks and the risk of injury and re:
To avoid accidents and injuries:
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children are not permitted to
play with the device. Cleaning and user maintenance are not to be undertaken by
children without supervision.

AUS
Safety regulations ASP12-ES
12 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
• Never leave a machine which is ready for operation unattended at the workplace.
• People and animals must not be vacuumed with the machine.
• Do not vacuum any hot, incandescent, ammable, explosive materials, or those
which endanger health. This includes hot ashes, petrol, solvents, acids or caustic
solutions. Personal injury could occur.
• Nozzles and suction tubes must not reach head level whilst in use. Personal injury
could occur.
To avoid accidents and injuries from electric shocks:
• Ensure that the mains cable is not damaged by being pulled over sharp edges, by
jamming, or by pulling on the cable.
• Before each use, check the power supply lead and the extension cable for dam-
age and ageing. Do not use the equipment if the cable is damaged or worn.
• m WARNING! Danger of electric shock hazard.
• If the power cable for this equipment is damaged, it must be replaced by the man-
ufacturer, a customer service agent of the same or a similarly qualied person in
order to prevent hazards.
• Switch the machine o󰀨 and disconnect the mains plug:
- when the machine is not in use,
- before the machine is opened up,
- for all maintenance and cleaning work,
- if the connecting cable is damaged or tangled up.
• Never use the mains lead to pull the plug out of the socket or to pull the appliance.
Protect the cable from heat, oil, and sharp edges.
• Make sure that the mains voltage corresponds with the information on the rating
plate.
• Only plug the appliance into a socket which is safeguarded.
• The device must only be connected to a mains socket via a residual-current circuit

AUS
ASP12-ES Safety regulations/Technical data
AFTER SALES SUPPORT 13
 1300 855 831  [e-mail]
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
breaker (RCD) with a rated leakage current of not more than 30 mA.
• Do not expose the unit to rain
CAUTION! The following states how damage to the appliance and possible injury to
people can be avoided:
• Ensure that the machine is correctly assembled and the lters are in the correct
position.
• Do not use without the lter. This could damage the machine.
• Only use replacement parts and accessories delivered and recommended by our
Service Centre. The use of parts by other manufacturers immediately renders the
guarantee void.
• Only have repairs carried out at our authorised customer service points.
• Observe the instructions for cleaning and maintenance of the machine.
• Store the appliance in a dry place and out of reach of children.
VI. Technical data
Mains connection 220-240 V~ 50/60 Hz
Power consumption 1200 W
Mains cable length 3 m
Container volume 12 L
Suction hose length 1.5 m
Safety class II
Max. Suction power 18 kPa
Protection class IPX4
Hose system Ø 35 mm

14 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
Assembly ASP12-ES
VII. Assembly
m Warning! Ensure the appliance is correctly and completely assembled
before use.
Unpacking (Fig.1.1)
1 Unlock the locking hooks (8) and remove the appliance head (3). Remove all
accessories from the container (7).
Mounting of the castors (Fig.2)
1 Place the container (7) upturned on the ground.
2 Push the castors (5) into the holes at the bottom of the container.
Mounting appliance head and handle (Fig.3)
1 Place the appliance head (3) onto the container (7). Secure the appliance head
(3) with the locking hook (8). When tting the appliance head (3), make sure that
the locking hook (7) locks into place correctly.
2 Place the handle (1) on the machine head (3) and secure it with the two screws
(14) by using a screwdriver (not included).
Fitting the lter (Fig.4/5)
Never use the appliance without a lter! Always ensure that the lters are
correctly mounted
1 Fitting the foamed plastic lter (12): For wet-vacuuming, slip the supplied foamed
plastic lter (12) over the lter basket. (Fig.4)
2 Fitting the additional lter (16): For dry vacuum cleaning always use the supplied
additional lter (16). Slip the additional lter (16) over the lter basket (9). (Fig.5)
Assembling the paper bag (Fig.6)
For vacuuming ne, dry dirt it is recommended that you use the paper bag (13). Slip
the paper bag (13) over the vacuuming hole inside of the container (7). The paper
bag (13) is suitable for dry-vacuuming only. The paper bag (13) makes it easier to
dispose of the sucked-in dust.

AUS
ASP12-ES Assembly/Operation
AFTER SALES SUPPORT 15
 1300 855 831  [e-mail]
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
Fitting the suction hose (Fig. 7)
Connect the suction hose (11) to the corresponding connector on the wet and dry
vacuum cleaner, depending on the application required.
Vacuuming:
Connect the suction hose (11) to the suction hose connector (4).
Blowing:
Connect the suction hose (11) to the blow connector (10).
Mounting the suction tube, hose and nozzles (Fig. 8)
1 Push the 3 parts of the suction tube (19) together.
2 Connect the 3-part suction tube (19) with the suction hose (11).
3 Push the adapter (17) into the 3-part suction tube (19).
4 Mount the oor nozzle (15) or the crevice nozzle (18) onto the adapter (17).
VIII. Operation
m Warning! Switch o󰀨 the appliance if liquid or foam is emitted with the ex-
haust air when wet vacuum cleaning.
On/O󰀨 switch (Fig. 1.1)
Press the On/O󰀨 switch (2) to switch on.
Press the On/O󰀨 switch (2) again to switch o󰀨.
Dry vacuuming (Fig. 1.3)
Use the paper bag (13) and the additional lter (16) for dry vacuuming. Always en-
sure that the lters are correctly mounted.
Use for for surface cleaning applications the oor nozzle (15).

16 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
Operation/Maintenance and cleaning ASP12-ES
Wet vacuuming (Fig. 1.3)
For wet-vacuuming, use the foamed plastic lter (12). Ensure that the foamed plastic
lter (12) is correctly mounted.
When wet vacuuming, the safety oat valve close if the maximum level is reached.
The motor is still running, but the suction function is not workable anymore.
Use for for surface cleaning applications the oor nozzle (15).
Danger! The appliance is not suitable for the vacuuming of combustible and hot
liquids. For wet vacuuming, use only the supplied foamed plastic lter (12).
Blowing (Fig. 7)
Use for blowing applications the crevice nozzle (18).
Using as a dust collector (Fig. 1)
Make sure, that the additinal lter (16) and paper bag (13) is inserted.
Connect the suction hose (11) with your power tool.
IX. Maintenance and cleaning
Pull out the power plug before every maintenance operation. This also includes
connecting to the water supply or trying to eliminate leaks. There is a risk of electro-
cution or of injury from moving parts.
Maintenance
The appliance is maintenance free.
Emptying (Fig. 1)
Switch o󰀨 the appliance and disconnect the power plug.
Remove the appliance head (3) by opening the locking hooks (8).
Empty the container by tilting.

AFTER SALES SUPPORT 17
 1300 855 831  [e-mail]
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
ASP12-ES Maintenance and cleaning/Troubleshooting
Cleaning
It is recommended to clean the appliance after each use.
Never direct a water jet against the appliance, nor clean the appliance under
owing water. This could give rise to the danger of electric shock and damage
the appliance!
Always keep the appliance clean. Do not use any detergents or solvents.
• Always keep the ventilation slots clean and free from dirt and dust.
• Clean the container (7) with a damp cloth.
• Wash the foamed plastic lter (12) with lukewarm water and soap and allow to dry.
• Beat the dust out of the additional lter (16) and clean it with a paint brush or hand
brush.
• Replace the paper bag (13) when full.
Replacement parts
Replacement parts can be ordered (e.g. paper bag, lter) at the After Sales Support.
X. Troubleshooting
Problem Possible Cause Action
Appliance does not
start.
Mains voltage is not present.
Check plug socket, cable, line,
plug and fuse, where approp-
riate, repair through electrical
specialist.
Defective On/O󰀨 switch.
Repair through customer
service.
Worn carbon brushes.
Defective motor.
Low or lack of
suction.
Hose system or nozzles
blocked.
Remove obstructions and
blockages.
Container open. Close container.
Container full. Empty container.
Dust or dirt is blow
out of the device.
Filter are not or not correctly
assembled.
Use missing lters or check the
correct position of the lter.

1AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
Storage/Disposal and recycling ASP12-ES
18
XI. Storage
• Clean up the appliance before storing.
• Drain all the water from the appliance before storing.
• Ensure that children cannot reach the appliance.
• Store the appliance and its accessories in a frost-free room.
• Hook the mains cable onto the cable hook at the blow connector (10).
• Accessories can be inserted in four the accessory holder (6)
XII. Disposal and recycling
The appliance is supplied in packaging to prevent it from being damaged in transit.
The raw materials in this packaging can be reused or recycled. The appliance and its
accessories are made of various types of material, such as metal and plastic. Never
place defective appliance in your household refuse. The appliance should be taken to
a suitable collection center for proper disposal.
If you do not know the whereabouts of such a collection point, you should ask in your
local council o󰀩ces.

WET & DRY VACUUM CLEANER
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 months from the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benets conferred by this warranty are in addition to all rights and remedies in respect of
the product that the consumer has under the Competition and Consumer Act 2010 and similar
state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
 1300 855 831  [e-mail]
19 MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

1AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
ASP12-ES
20

WET & DRY VACUUM CLEANER
Repair and Refurbished Goods
or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as les
stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs
stored on a portable media player, games saved on a games console or les stored on a USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 855 831 or write to us at:
RossMac Pty. Ltd.
P.O. Box 261, Essendon North, Victoria, 3041
1300 855 831
suppor[email protected]
AFTER SALES SUPPORT
 1300 855 831  [e-mail]
21 MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018

22 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:ASP12-ES PRODUCT CODE: 62361 10/2018
AUS
ASP12-ES