Alfa Network APAG03-2 User manual

APAG03-2
2Watt ISM Band 2.4GHz Booster Module
APAG03-2 is a cost-effective, high performance 2.4GHz RF power amplifier module using Time
Division Duplex (TDD) technology. APAG03-2 can be installed at indoor or outdoor system to extend
wireless connecting distance and enhance throughput.
Feature
¾Cost-effective PCBA module package with EMI shielding cover.
¾Dual band b & g compatible
¾Bi-directional, half-duplex and Auto-Switching(Plug & Play)
¾Flexible 3 DC power supply options
¾LED(Red) indication for Power on
¾LED(Greed) indication for Transmit
¾Compact size and easy for system integration
¾Flexible parameter adjustment per customer request.
Specification
Parameter Min. Typ. Max. Unit Remark
Frequency Range 2400 2500 MHz
Output Power @ 1dB Compression 33 dBm
30 dBm @ 802.11b / 11Mbps
Linear Output Power 27 dBm @ 802.11g / 54Mbps
Tx Mode Turn On Power 1 5 15 dBm
Fixed Transmit Gain 13 15 17 dB
These parameters can be
adjusted per customer request
Receiver Input Power -15 dBm
Receiver Gain 8 10 12 dB
Noise Figure 3.5 dB
Transmitter Current Consumption 350 1450 mA Measure at DC input point
Receiver Current Consumption 90 mA Measure at DC input point
Input/Output VSWR 2
Operating Temperature -20 +70 ℃
DC Supply Voltage (Option 1) 4.8 5.0 5.5 V
DC Supply Voltage (Option 2) 7.0 7.5 9.5 V 7.5V is Recommended
RF Connector SMA Female
Dimension mm 75.6 x 62.3 x 15
Net Weight 52 g

【Note】: The above spec is defined base on 25 oC / RH=70%.
Dimension (unit: mm)

Application: Connecting Booster in a WLAN System
Typical WLAN system diagram with APAG03-2
Connecting DC Power
Option A: 7 -9Vdc via black DC Jack. DC Jack Diameter: 2.1/5.5mm (7.5V is recommended for the
best power efficiency).
Option B: 7 -9Vdc via RF input SMA connector.
Option C: 5.0 - 5.5Vdc via small white DC Jack.
Connecting RF Signal
RF Input Connector (SMA Female): To AP
RF Output Connector (SMA Female): To Antenna