Algo 8036 User manual

- 1 -
8036 SIP Multimedia
Intercom
User Guide
Algo Communication Products Ltd.
www.algosolutions.com
90-00081C

- 2 -
Table of Contents
Overview ........................................................................ 4
Introduction .............................................................................4
Key Features.............................................................................4
What’s Included .......................................................................5
Product Tour.............................................................................6
Setup and Installation.................................................... 7
Wall Mounting .........................................................................7
PoE Network Connection........................................................15
Programming and Configuration................................. 16
Web Interface Control Panel ...................................................16
Accessing the Control Panel....................................................16
Setup SIP Account...................................................................18
Application Development............................................. 19
Overview ...............................................................................19
Creating User Interface Screens..............................................20
Custom Graphic Screens.........................................................20
Directory (Addressbook) Listings .............................................21
Uploading user content ..........................................................22
Control Panel Menu Reference..................................... 23
Status.....................................................................................23
Settings ..................................................................................24
User Interface.........................................................................33
System ...................................................................................42
Door Control ................................................................. 45
Configuring the 8061 .............................................................46
Configuring the 8036 with the 8061.......................................47
Door Control Hardware and Wiring ........................................47
Appendix ...................................................................... 48
Upgrade 8036 Firmware ........................................................48
Soft Reset ...............................................................................49
Button Positioning Table..........................................................50

- 3 -
Directory (Addressbook) Text Files...........................................53
Working with Compressed Files ..............................................55
Specifications .........................................................................57
FCC Compliance ....................................................................59
Important Safety Notice..........................................................59

- 4 -
Overview
Introduction
The 8036 is a multimedia SIP endpoint from Algo
combining the functionality of an IP phone,
security camera, and interactive kiosk.
Easily configurable to support multiple
applications and interface configurations,
the product is designed for outdoor or
public access locations to provide
enhanced communication and support for
guests and visitors.
Key Features
• Sunlight viewable 5.7” VGA color
capacitive touch display
• Integrated camera for still snapshot or H.264 video
streaming
• Weatherproof
• Wideband speaker and dual microphones
• Presence detection
• Secure door/gate management
• Web interface panel for configuration and application
programming
For comprehensive product and application information,
please visit www.algosolutions.com/8036

- 5 -
What’s Included
For information on the use of each of these components,
please refer to “Setup and Installation” on page 7.
Algo
Security
Tool
Ethernet
Cable Boot
#8 x 1
Type B
Pan Head
Phillips
Qty: 6
#8 x 1.5
Type A
Pan Head
Phillips
Qty: 6
Drywall
Bracket
Surface
Mount
Bracket
Mounting
Gasket
8036
Assembly
with
Front Bezel

- 6 -
Product Tour
Front View
Presence Detection
VGA H.264 Camera
“HD” Dual Microphones
Nickel Plated Cover
“HD” Speaker
Algo Logo Badge
covering Security Screw
Sunlight Viewable
Touch Display
SIP PoE
(Connector on Back)
Back View (of 8036 Assemby)
Weatherproof
Ethernet Cable
Boot
PoE Network
Jack

- 7 -
Setup and Installation
This section will guide you with the physical installation of
your new 8036 SIP Multimedia Intercom.
Wall Mounting
The 8036 can be either surface or flush mounted. The unit
is designed to shed rainwater and allow air ventilation only
when oriented in the correct position (ALGO logo at top) and
installed vertically.
Removal of Front Bezel for Installation
The 8036 is shipped partially assembled and must be
partially
disassembled before
it can be installed.
Remove the security
screw behind the
ALGO Logo Badge
by first pressing
on one side of the
badge. This will raise
the other side so that
it can be removed
easily by hand.
A security bit (“Algo
Security Tool”) is
included with the
8036 that fits standard socket screwdrivers. Use the bit in a
screwdriver to remove the security screw and carefully remove
the Front Bezel by pulling at the top and then disengaging the
bottom clip.

- 8 -
Algo
Security
Tool
Put the Front Bezel, Security Screw, and Logo Badge aside for
re-assembly after mounting.
Refer to the following diagrams for the appropriate methods
and components to use for different mounting applications.
Flush Mounting into Drywall (Interior)
1. Create a drywall cut out per the template on page 4 of
this sheet.
2. Place the Drywall Bracket into wall and bend tabs around
to the front of the drywall to hold in place.
3. After connecting the Ethernet cable, use the #8 x 1.5”
Type A Pan Head screws to secure the 8036 housing to
the Drywall Bracket.
4. Replace the Front Bezel and keep the Algo Security Tool in
a safe location.
5. Replace the ALGO Logo Badge.
The Mounting Gasket and Surface Mount Bracket are
not required for drywall mounting.

- 9 -
Flush Mounting an 8036 into an interior wall (drywall)
Front Bezel
#8 x 1.5” Type A Pan Head
(Typical) Six needed
8036 Assembly
Logo Badge
Security Screw
Under Logo Badge
Drywall
Bracket
Drywall
A template for cutting a hole in the wall can be
downloaded at
www.algosolutions.com/8036mounting

- 10 -
Flush Mounting into Other Materials or Outdoors
The same guidelines of flush mounting from the previous
section apply, however, the Drywall Bracket may not be
required if the wall material is firm enough to hold a screw
close to the cutout edge. A #8 anchor may be required (not
supplied) for the wall material.
If outdoors:
1. A rubber Ethernet Cable boot is supplied to be placed
over the network cable prior to terminating with a plug
(see “PoE Network Connection” on page 15).
2. While the 8036 is designed to withstand rain, it may be
undesirable for water to enter the wall cavity. This can be
achieved by sealing the cable hole prior to mounting or
using the Mounting Gasket between the 8036 and wall.
Uneven surfaces may require a silicon bead around the
8036 after installation.
Flush Mounting an 8036 into Drywall
Front Bezel
#8 x 1.5” Type A Pan Head
(Typical) Six needed
8036 Assembly
Logo Badge
Security Screw
Under Logo Badge
Drywall
Bracket
Drywall