Alico GSWM001 User manual
INSTALLATION MANUAL
75x75/100x100 MAX 2~9kg
(4.4~19.8lbs)
RATED
32”
GSWM001
Single Monitor Wall Mount
2
Supplied Parts List
Arm
A (x1)
Cover
B (x2)
Allen Key 5mm
C (x1)
M5x12 Bolt
M-B (x4)
Φ10x45 Anchor
W-B (x2)
M4x12 Bolt
M-A (x4)
D5 Washer
M-C (x4)
ST6.3x55 Screw
W-A (x2)
Washer
W-C (x2)
or screwdriver. (Socket wrench and screwdriver not included)
A
Stud Finder
W-A
W-C
3
Step 1
Option A
Wood Stud
2. Drill 3/16"(4.5mm) diameter x 2.2”(55mm) length holes at the marked position.
3. Attach the mount to wood stud and tighten using Screw W-A & D5 Washer W-C with a socket wrench
1. If installing this product on wood stud, mark the position with Bubble Level & pencil
on the wall.
W-B W-C
W-A
4
Option B
Concrete Wall
1. If installing this product on concrete wall, mark the position with Bubble Level &
pencil on the concrete wall.
2. Drill 3/8"(10mm) diameter x 2.2”(55mm) length holes at the marked position.
3. Insert the Anchor into the mounting holes. Attach the mount to concrete wall and tighten using
Screw & Washer with a
socket wrench or screwdriver. (Socket wrench and screwdriver not
included)
W-B
W-A W-C
Step 3
Step 2
Fix Cover Bonto the front of mount part.
5
Step 3.1
Select TV Screws
Step 3.2
Step 3.3
Manually thread screws
into the mounting holes
on the back of your TV to
determine what size of
screws will fit. (M4/M5)
M-C M-C
M-A M-B
C
Attach the VESA Plate to your TV/Monitor, and thread M4x12 Bolt M-A or M5x12 Bolt M-B into the mounting holes
with D5 Washer M-C , tighten with Allen Key 5mm C.
Detach the VESA Plate by threading the Top Screw
counterclockwise.
B
A
Step 5
Step 4
6
For Heavier Monitors
For Lighter Monitors
· Insert the 5mm Allen Key into the adjusting hole and turn clockwise (-) to reduce gas spring tension, suitable for lighter screens.
· Insert the 5mm Allen Key into the adjusting hole and turn counter-clockwise (+) to increase gas spring tension, suitable for heavier screens.
· Please take note it may take numerous turns for gas spring tension adjustment.
A
C
C
Put the assembled TV/Monitor onto the Arm Aand ensure the stability, tighten the VESA plate using Top Screw.
Press the Arm Aon horizontal level as image shown, adjust gas spring tension to your personal preference using Allen Key
5mm C. Adjust the tilt tension using Allen Key 5mm C.
Step 6
7
Manually swivel, tilt, and rotate the monitor for the best viewing angle.
Step 7
Step 8
CC
Guide the cables through and put the cable cases back.
Screw out the bolts with Allen Key 5mm Cand take off the
cable cases.
Guide the cables through and put the cable cases back.
If you have any questions,please contact us.
We support the technology that brings your home to life.
We offer high quality products, professional customer service,
and extensive technical support.
www.walielectric.com
Other Alico Rack & Stand manuals
