Alico STT001D-B User manual

[email protected]
INSTALLATION MANUAL
Monitor Stand Riser
STT001D-B/STT001D-S
STT001D-2B/STT001D-2S
20kg
44lbs
RATED

Supplied Parts List
Step 1
Step 2
A(x1) B(x2)
Wrench
C(x4) D(x1)
E(x1) F(x1)
2
G(x1) H(x2)
Shelf Support Stand Nut
Left Bracket Right Bracket Drawer Strap
Caution:
Attach the left and right bracket to the drawer .
EF
G
G
EF
G
Place Shelf on a flat surface with bottom upward as the image shown.
A
Caution: Please make sure Shelf A is in the same direction as the image shown ( Tip: Check the letter L&R facing the
direction).
A
Please make sure the drawer and brackets are placed in the correct arrow direction as the image shown.
correct

Step 4
Step 3
3
Firmly hold the assembled drawer and insert it to the screw on Shelf as the image shown.
A
A
A
Please make sure the arrow on the brackets are pointing to the cable slots on the Shelf .

4
C
D
A
Step 5
B
Insert Support Stand to the screw on Shelf . Fix the Support Stand using Nut and tighten with Wrench (Do
Not Overtighten).
ACD
B