Alinco DM-330MV User manual

ALINGO
REMOTE
CONTROLLER
The DM-330MV does not
include a remote controller.
Nor is it availableas an
optionalaccessory. lt can
be easilyassembledusing
the diagramprovided. The
adiustable voltage ranges
from approximately 5-15
volts.
3.5mm
stereo plug
CAUTION
"Theremotecontroller
must be assembled
exactlyasthe diagramshows.
Using
SPresistors
of differentvaluescan damagethe unitandwillvoid
the warranty.
'Whenthe remotecontrollerisconnected,the unitmust beturnedoff.
The maximum
lengthof cable.that
should be usedis 1.5mor Sft.
ll.\l Al lNeO lNC.
l-nr.nrcol nrrllYYtll
Head Otfice: 'TwlN 21" MIO Tower Building 25F
1-61. 2-Chome, Shlromi, Chuo-ku, Oska 54O-858O, Japan
Phone: 06-691+6-8150 Fd: 06€946-4175
Thank
youlor purchasing
theAlincoswitching
modeDCregulated
power
supply,DM-3301,4/.
TheDM-330MV
instruclionmanual
contains
importantsafetyand operating
instructions.
Readthis manual
carefullybeloreusingthis
Droduct.
Keeothemanualforfuturereference.
ALtNCO,tNC.
INTRODUCTION
Alinco's DM-33OMV is a high ef6ciency...compacllightweight high perfomance
switching modepower supply- It is a.lsoengineeredto minimize the switching noise
specifcally for communicationuse- Even whea noiseoccurs.it may be eliminatedwith
tle Noise-Ofbetfunction. Also convenientfunctionslike pre-setvoltage,remote control
andahighlyvisible
backlit meterarestardardin thispower
supply.
PRESET
FUNCTION
Whenthis function is activated,a presetvoltagewill be suppliedregardless
of the cunent
voltage setting. To store the preset voltage, tum the switch to the pres€t positbn and
adjustthepreset
voltage
tothedesired
output
level.Whenthislunctionisselectedthevol-
tage adiustmentcontrolon thefront panelwill be deactivatedto proted tromovervottage.
SPECIFICATIONS
Inputvottage: 120VAC(MVD/230VAC(M\r4
Outputvollage: 5-15VDCvariable
Oiputvolt4eEgdation:lessthan2%
Protection: short-circuit,
Automatic
cunent
limitingover32A
over-temp6rature
Outputc1Jr'gnt 32A(max),3oA(continuous)
Rippl6: lessthan1smvp-patraledload
Fuse: 8A(MVT)/4A(M\Z)
Meter: singlevolt/ cunent meter,back-lit
Dimensions: 1
75(W)
x 67(H)
x 1
65
(D)
mm
Weiglrt approx.2kg
u.S.A.: 438 AmFla Ave., Unit 13O,Tomn@, CA 905'01'6201, U.S.A.
Ph@6: 31ffi 1
8-8616 Fd: 31OGl8-8754
htF/A/ww.alin@.@rnl
Gcrmany: EschtDmr Landatre 55,6o4a0 FranKun am Main, Gemany
PtFm: 069-78€018 Fd: 069-789€0766
hb:/ tw.di|E.dal
O1999 Akp, |rc., Os8l€, J€psl. AI rtdtts lwwd.
Alhough AI@ h6 (bsigred rils |llrud to b€ 6 wnpd€nsh€ 9nd @rate 6 po$ilte, re ffi dghtto make
cfErE$ ai $y fire to the dterit6 d u spsifcati(rc. Pbe rcte thd ddn prodrEis 9nd@eswies ruy not b€
a€ihbl€ h aI @untn€ of dbtnbt iI. Pl€e trsJt ]err Anhqized AFE Deal€r
{cr hf@tih.
PARTNAMESAND FUNCTIONS
FrontView RearView
o @oo e@
@eoo(E@
Q Powerswitch: Tumsthe unit on andoff.
C Meterswitch: Selectthe positionto indicatevoltageM or cunent (4.
O maen Displaysthe voltageor cunent,
lO Snap in output terminat: 5Amax. Redpositive,blacknegative.
t! cigarette ptugt€rminal: 10Amax.
(D Presetindicaton Lightsupwhen presetfunction isactivated.
Q eroteAnon indicatot: Lights up as a waming when the cunent limiting system is
activaled.
C Pow6rindicator: Lightsupwhenthe unit istumed on.
(D Voirageadiustm€nt Adiustsvoltage between5.0 and 15.0votts. Tum clockwiseto
increaseand counterclockwiseto decr€asethe vottage. Whenit is set at the center
position
itwill
Eupply
13.8volts.
(D noise off-set volume cortrol: Adjust to eliminatethe pulse noise of the switching
circuit. Thispatent
pending
functionis specially
designed
lor communicationuse.
(lt's effectivenessmayvarydep€ndingon the frequencyand mode.)
I Coolingfanl Thefan tums on and off automatically.
O Remotecontrol terminal: By conn€ctinga remotecontroller,the output voltagecan
be remotecontrolled.'Note:
Whonthe r€molecontrolis connected
to the unit,the
unit must be tumed off. When the remote control is being used the voltage
adiustmentknoband presetfunction will be deactivated.
(p Prcsetvolume: see(D
@ Presa swilch: To store the preset voltage, tum this switch to the preset position
andadjustthe presetvolumeto the desiredoutput level.
O Heatsink: Donottouchthesurface
whentheunitis inuse. Letthe unitcooldown
completelybefore
touching it.
O Groundingscrew: Used
to connectthe Earthgroundingcableto the unit,
O Output terminat: 32Amax. Redpositive,blacknegative.
Q Powercable: 12OVACoutlet (MW)/23oVAC outlet(MVa
(D Fuse: sAO,lVD/4A(M\z)
CAUTION
1.Eventhoughthe chassisof the unit is
negatively
grounded,usethe conegt t€r-
minalsto connectcable.
2.Whenplugging
the unitintoa wallout-
let.it mustbetumedoff.
3.Placethe unit in a dry and wellventi-
latedarea.
4.Nevertouchthe unitwhileinuse. Even
thoughit isdesigned
forhigh
efiiciency,
theunitwillstill
gethot.lftheunitreach-
es a certaintemperature,the "e)Creme
temperaiure
protection" tunctionwill
protect the unit by automatically drop-
ping the cunent down to a sale level
and
theprotection
indicatorwilllightup.
5.A current limitingsystem wfil protect
theunitfromoverloading.
6.lf a short circuit occurs at the output,
the unit is protected by a short circuit
protection
tunction. lmmediatelytum
offthe unitandrepairthe causeof the
shortcircuit.
then
tum itbackon.
7.Do not use the unit for devicesthat
requirehighcurTentinputat the start,
such as motorizedequipment.Do not
usethe unitto chargeacar battery.
8.
Donotuse
acar
cigarettelighterinthe
cigaretteplugsocketonthe unit,
L Beforer6placinga fusemakesure
the
unit is tumedoff. Be sure
to usethe
speciliedtype of tuse.
1o.Make
surethe productis always
suit-
ably grounded to prevent electric
shock and to reducenoise.
(fhe unit
can be grounded by connecting a
grounding cable to the appropriate
screw)
1l.Never disassemble,
modity,or touch
the inside of the unit unnecessarily.
This could causedamage
to the pro.
ductandwillvoidthewanantv.
DM-33OMV
o @@ (E@@

FOR
YOURSAFEW
The following pages
explain how to avoid possible
accidents
and damageto the user and his property. They will explain
the proper manner in which to usethis product.
Explanation
ofcaution
indications
'1: injuri€i skin b!ms, d6tdc ah@k€, etc. rct requiring hGpihlization or ds-
sive m€dical t eamnl
'2: gxt€nsivo
damag6to buildingsand possdsiohs; injuryto domegticatedani-
mal! and FFts
Explanationof symbols
Symbol Meaning
of symbol
@This symbol indicatesactionsthat must be strictlyavoided.
The
details
of theactionsto be avoidedarewritteninor aroundthesym.
bolusing
graphics
and/or
text.
oThis symbolindicatesthat there are procedurss
that must be fol.
lowedwithoutfail.The
procedures
to befollowedaredescribed
inor
around
thesymbolusing
graphics
and/or
te)d.
GThissymbol
indicatesthatthepowerplug
mustbedisconnectedfrom
thesocket.
Detailsofthewarningare
writteninoraroundth€symbol
using
graphics
andlortext.
Beforeusingthisproduct,please
note
thatweshallnotassumeanyresponsibllity
whatsoever
for purely
economic
losses,suchaslost
communicationopportunities,
resulting
from
breakdowns,
incorrectoperation,
productproblems,
or externalcaus-
essuch
aspower
cuts.
,/N D"ng"t
Awaming
RDo not plug/unplug
the unit
with wet hands.lt mayeasi-
lycauseelectricshock.
@Do not use the unii where
there
maybeflammable
gas.
This may cause fire and
explosion.
sUnplug the cable when
replacingthefuse. Usethe
specified
fuse
only.
Usingthe wrongfusecould
cause
heat
and
fire.
C Unplug
the unitduring
main-
(p tenanJe. otherwise it may
ohffi causeshockand damage
to
tuffi theproduct.
ila tfr
bffi
- UnDluo
immediatelvif anv-
fr- thingnoticeablyunusualhap-
\t/ o"ni. "u"n as smoKeano or
o*t i113ngsodors coming from
iffi tne unit. Contactour author-
h3o*.t ized service centers imme-
diately
forservice.
sN€verleave
the unitwithina
child'sreach.This
mayinjure
themorbumtheirskin.
"R"
Makesurethatthed6/i:es that
areto be conneciedrneet
the
sD€cificatidsof this unit other-
wiseit rnayca$e darnage
to
tleoroduct.
s"
Do not cover
theairventon
the chassisor the fan. This
maycauseerilreme
heat,fire
and
damag6.
s"
Donot use
theunit
for devic-
es that requirehigh cunent
input at the start, such as
motorized equipment. Do
not usethe unitto chargea
carbattery. Thismaycause
damagetotheunit.
oNevertry to usea car cigar-
ette lighter in the cigarette
lighter socket of this pro-
duct.Otherwise,
the product
maybecome
damaged.
gThisunitshouldonv be us€d
with a standard wall outlet
120VAC(MW230VAC(MV4.
lf it isused
inany
otherman-
ner el€ctric shock and fire
couldcrccur.' gWash immediately with
water if any liquid leaks
from inside the unit and
comes in contact with skin
andor ddEs lt may irritate
the skin and could stain
clothing. tf any liquid gets
into the eye, wash imme.
diately and contact a doc-
tor. lt may causeiniuryto
theeye.
Caution indication Meaning
,A o.ng", lmproperhandling
presents
animmediatedangerofdeathor
serious
iniury.
/i\warninslmproper
handlingmayleadtodeathorserious
iniury.
.4\caution lmproper
handling
presents
ariskto physical
health1or
property.
.2 oNevertouch the chassisof
the unitduring
use. Thesur-
face of the product-may
b€comevery hot, especially
the h€atsink, A bumto the
skinmayoccur. as_
Do not short-circuitthe
cables. Make sure the
cablesareconnectedto the
conectterminal.
(Positive
to
positive and negative to
negative)
hr$ly
ffiffi
Donot disassemble,modify
or repair the unit unless
otherwise specified in the
manual. Only
an authorized
technician
maydothis. Nev-
er modify the cable to
extend or shortenit. This
may causefire and or elec-
tric
shock.
and.willvoidthe
waranw.
&l
v
us€ha
HFEb
FSffi
Neverusetheunitoutsid€.
in
a bathroom, or any other
place where the unit could
becomewet. Do not restany-
thing that containsliquidon
the product. lf liquid gets
insidethe unitit couldcause
fire,shockanddamageto the
unit. lf this happens,
unplugthe unitimmediately.
Do not use the unit in a
humidenvironment. lf dew
condenseson the unit,dry it
completely
beforeuse.
oUselhb unitonv h roorn
lern-
peratur€s.(1
0to35degrcescen-
tigradeor50to 95degreesFah-
rerfr€*o]Gepthe mit in a dry
and w€lFventilatedolace. Do
not uset|e unit in directsun-
$gtrt,or where
it rnaycornein
contrl withwaterorinapoody
ventlatedar€a lt rnaycause
hed,fneanddanagetofie |.nit
Placethe unii on a secure
and
horizontalsurface. lf it is
olaced
on an unstablesurf,ace,
the unit may drop and cause
"nJ*, damageand iniury. This will
alsobe helpfulin gettingaccu-
ratemeterreadings.
oAlwayshold the plug when
plugging
andunpluggingthe
unit. Neverunplugthe unit
by pulling
thecable. lt may
causefire. shock and dam-
age
to theunit.
sNever
insert
anymetalorflam-
mable
obietsinsidethe unit.
It maycausedamage,shock
and fire. lf any foreign
obiectsget into the unit,tum
it off and unplug it and con-
tactanauthorized
s€rvicecen-
ter. slnsert the cigarette-plug
s€curely
andcompletely
into
thesocket.
lnsufficientconnectionmay
cause
Other Alinco Power Supply manuals
Popular Power Supply manuals by other brands

Dometic
Dometic SMP301-02 Installation and operating manual

Panther
Panther 107758 user manual

COBHAM
COBHAM SAILOR 6081 installation manual

Manson Engineering Industrial
Manson Engineering Industrial HCS-3404 user manual

Nortel
Nortel Nortel 10 Installation and reference guide

Alpha
Alpha DOCSIS DM31 quick start guide