Alladin BI-FLEX M3 Bi-Color User manual

Aladdin BI-FLEX M3
Bi-Color
USER MANUAL

THANK YOU FOR YOUR PURCHASE
Aladdin Lights
[email protected]
User Manual
Version: 1.0

Unpack your panel and accessories from the kit. The panel features a short
cable with connector. Plug it in to your dimmer-unit or use the extansion
cable in between. Plug in your dimmer-unit to a power outlet. Instead of
using the power outlet, there’s an option to use the integrated V-Mount or
Gold-Mount plate on top of the dimmer to use batteries from 12-30V DC.
Just note that you need batteries which can handle the power draw of 30
watts from the panel. There’s a simple calculation for that:
If you are using 14.8V batteries you need at least a working current of 2A.
If your battery is rated at 14.8V and 100Wh/6.8Ah you can run your BI-FLEX
M3 for 3.5 hours.
For any further questions about using our products please refer to our cus-
tomer service or watch the instructional videos on www.aladdin-lights.com
or YouTube.
START-UP GUIDE
1
1 Connector
2 Metal corner (can be attached to magnets)
3 Velcro
2
1
3
POWER DRAW (W) = MIN. WORKING CURRENT (A) =
BATTERY VOLTAGE (V)
30 (W) = 2.0 (A)
14.8 (V)

2

IMPORTANT CAUTIONS AND WARNINGS
• Do not use near flammables and heaters.
• Do not expose the unit to direct sunlight for a long period (applies also for
storing in a car).
• Do not use the dimmer wire or extension wire to hang or mount the panel.
• Do not bend or fold the panel more than 90 degrees.
• Do not tape directly on the LEDs of the panel - they can burn out.
• Do not damage the product with improper force or cause any impact with
heavy objects.
• Do not cut the panel with sharp objects.
• Keep out of reach of children.
• The panel will heat up when running a long period of time on 100% pow-
er, make sure to have it in your eyesight at all times. Use the X-BEND holder
or frame to assure enough air flow for heatreduction.
• Use the product only within the temperature range of -10°C – +40°C.
• Make sure the panel has cooled down before storing it in the pouch or
any other case.
• When you have technical problems while using the product, stop using it
immediately and contact your dealer / reseller.
3

SELECTED OPTIONAL ACCESSORIES
WARRANTY
We provide a one year warranty period after the purchase. This warranty
covers repairs or a replacement for faulty products within this period. After
this warranty has been expired, you can still get repairs for your product
which will be charged extra.
Aladdin Lights reserves the right to refuse warranty service on products un-
der disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below listed causes, the warranty does not apply, even
if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
4
MFL30BIDF
Diuser for soening the
light source.
MFL-DMXAT1
For controlling your light
over a DMX controller.

Light source 30W Bi-Color Micro LEDs
CRI Ra 97
TLCI 96
Color temperature 2900K - 6300K
Beam angle 140°
Dimmer Dimming: (1%–100%)
Cooling Passive cooling
Dimmer input 12V to 30VDC
Power unit input Automatic Voltage 100V to 240VAC
Power consumption 30W
Dimensions 300mm(W) x 125mm(H) x 5mm(D)
Weight 175g
Connection Connector plug
Temperature range -10°C – +40°C
DMX512 support Yes - with separate DMX attachment
DMX512 2 channels - White Bi-Color
TECHNICAL SPECIFICATIONS
THANK YOU FOR YOUR PURCHASE
5

www.aladdin-lights.com
PICTURE BY ZODIAC PICTURES