Allen-Bradley 194L User manual

Installation Instructions
Control and load switches
(Cat. No. 194L)
Use front element Cat. No. 194L-HE...
194L-E 194L-HC...
800E-AW2
2
3
6
5
14
7
9
8
7
6
5
4
3
1
2
0.7 Nm
[6.2 lb-in]
1.2Nm
[10.6 lb-in]
PH 2
PH 1
Type HC
Type HE
Mounting position
0.7 Nm
[6.2 lb-in]
PH 1
View Z
Optional
(only for: E, L type)
Attention: To prevent electrical shock, disconnect from power source before installing or servicing. To be commissioned and maintained only by qualified personnel;
pay attention to the operating instructions!
Achtung: Vor Installations- oder Servicearbeiten Stromversorgung unterbrechen, um Unfälle zu vermeiden. Inbetriebsetzung und Wartung nur durch Fachpersonal;
Betriebsanleitung beachten!
Attention: Avant le montage et la mise en service, couper l'alimentation secteur afin d'éviter tout accident. Mise en service et entretien: seulement par du personnel
spécialisé; respecter les instructions d'exploitation!
Attenzione: Per prevenire infortuni, togliere tensione prima dell'installazione o manutenzione. Messa in servizio e manutenzione solo da personale specializzato;
attenersi alle istruzioni per l'esercizio!
Atención: Desconectar la alimentación eléctrica antes de realizar el montaje y la puesta en servico, con el objeto de evitar accidentes. Puesta en servicio y
mantenimiento exclusivamente por personal especializado; respetar las instrucciones de puesta en servicio y mantenimiento!
IEC/EN 60947-3
UL 60947-4-1
CAN/CSA-C22.2 No. 60947-4-1
D
B
B
(A) ø 3.3
[1/8]
Load Size [A]
A
(only for
2-holes mounting)
B
(only for
4-holes mounting)
D
12
16
20
25
32
40
-
36
[1-27/64]
36 or 48
[1-27/64] or [1-57/64]
36 or 48
[1-27/64] or [1-57/64]
17
[43/64]
194L-A
Load Size [A]
A
(only for
2-holes mounting)
B
(only for
4-holes mounting)
D
12
16
20
25
32
40
36
[1-27/64]
36 or 48
[1-27/64] or [1-57/64]
36 or 48
[1-27/64] or [1-57/64]
194L-E
9.5
[3/8]
28 or 32
[1-7/64] or [1-17/64]
28 or 32
[1-7/64] or [1-17/64]
33
[1-19/64]
mm
[in]
Z
Use front element Cat. No. 194L-HE...
194L-A
0.7 Nm
[6.2 lb-in]
1.2Nm
[10.6 lb-in]
PH 1
PH 2
23
5
4
7
6
Mounting position

TORQUE/
SLOT
9lb-in
1Nm /
PZ 1
10.6lb-in
1.15Nm /
PZ 2
36-106-811-01
DIR 36_106_811 (Version 07)
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
For Technical Support, visit ROK.AUTO/SUPPORT.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza ĺş Merkezi E Blok Kat:6 34752 ĺçerenkÖy, ĺstanbul, Tel: [phone]
Allen-Bradley, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
EEE YÖnetmeliğine Uygundur
Publication 194L-IN007G-EN-P - November 2020
Copyright ©2020 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.