Mini Hub
user guide
Let’s get started
Turn it on
Plug in the Mini Hub to start
charging its battery, and switch it on.
The signal indicator light will turn
solid blue when it’s connected to the
network and you have a good signal.
Connect your devices
In the wi-fi settings menu on your
device, look for the name of your
Mini Hub. You can see it on the
password card.
Once you’ve clicked ‘connect’, enter
the password for your Mini Hub. This
is also on the password card. And
there you go. You’re ready to get
online with free unlimited data.
To charge your Mini Hub
Use the Micro USB cable or other
suitable charger. Once it’s charged,
you’re ready to go. Keep the power
button pressed down for a few seconds
to turn your Mini Hub on.
Keeping it plugged in for a
long time?
It’s best to remove the battery –
otherwise the Mini Hub might overheat.
We’ll keep you connected
We’re sorry you’re without your
broadband. We’re working hard to
get it sorted as quickly as we can.
In the meantime, as a BT Halo
customer you can keep connected
with this Mini Hub.
We’re busy sorting your broadband
We’ll tell you when your broadband’s
up and running so you can reconnect
your devices to your Home Hub.
Then we’ll switch off the Mini Hub.
This Mini Hub’s yours to keep
Keep it somewhere safe. If you
need your Mini Hub in the future,
contact us. We’ll be ready to
activate it.
The power indicator will tell you
how much battery is left:
a solid blue light = you
have enough power
a flashing blue light =
it’s charging
a solid red light = the
battery’s lower than 20%
101262 Mini Hub User Guide - Halo_v4.indd 2101262 Mini Hub User Guide - Halo_v4.indd 2 07/09/2020 13:4507/09/2020 13:45
