Setting Dipswitches
To set a dipswitch to determine which coins the machine will ac-
cept, refer to information below for your coin drop.
Electronic Coin Drop 70294101
The electronic coin drop comes preset from the factory ready to
accept US and Canadian coins (dipswitches 13 and 14 in OFF
[Accept] position) and preset to block currency for Japan and Tai-
wan (dipswitches 11 and 12 in ON [Blocked] position). To
change drop to accept another currency, the appropriate dipswitch
must be in OFF (Accept) position and the remaining dipswitches
must be in ON (Blocked) position.
NOTE: Switch is in up position when ON (Blocked) and
is in down position when OFF (Accept).
The electronic coin drop is capable of accepting or blocking coins
based on the electronic signal generated by the coins. If the drop
is accepting invalid coins (slugs, foreign coins, etc.), the toleran-
ces can be narrowed (valid coins may be occasionally rejected,
but they will be returned to the customer). To set the drop to ac-
cept only medium tolerances, the dipswitch for the wide tolerance
must be in the ON (Blocked) position.
For instance, 0.25 USD wide (dipswitch 1) should be in ON
(Blocked) position. To completely block a specific coin, the wide,
medium and narrow (1.00 CAD only) tolerance dipswitches for
that coin must be in the ON (Blocked) position.
Coin Output 1 of the drop is used for coins listed below. For US
and Canada coins, the drop gives one signal for 0.25 USD/CAD,
two signals for 0.50 CAD, four signals for 1.00 USD/CAD and
eight signals for 2.00 CAD. (Coin Value 1 on the electronic con-
trol must be set for 0.25. Refer to the control's Programming
Manual for instructions on setting coin values.) For Japan coins,
the drop gives one signal for 100 JPY and five signals for 500
JPY. (Coin Value 1 on the electronic control must be set for 100.
Refer to the control's Programming Manual for instructions on
setting coin values.) For Taiwan coins, the drop gives one signal
for 10 TWD and five signals for 50 TWD. (Coin Value 1 on the
electronic control must be set for 10. Refer to the control's Pro-
gramming Manual for instructions on setting coin values.
Preset 70294101 Dipswitch Settings
Dipswitch Coin/Token Type
Blocked (ON
position)
Accept (OFF
position)
1 0.25 CAD/0.25USD/100 JPY/10 TWD wide X
2 0.25 CAD/0.25USD/100 JPY/10 TWD medium X
3 0.50 CAD/500 JPY old/50 TWD old wide X
4 0.50 CAD/500 JPY old/50 TWD old medium X
5 1.00 CAD/1.00 USD/500 JPY new/50 TWD new/50 TWD 2002 wide X
6 1.00 CAD/1.00 USD/500 JPY new/50 TWD new/50 TWD 2002 medi-
um
X
7 1.00 CAD narrow X
8 Teachmode X
9 2.00 CAD wide X
10 2.00 CAD medium X
11 Taiwan currency X
12 Japan currency X
13 US currency X
14 Canada currency X
Table continues...
Setting Dipswitches
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
7 Part No. 802460R7
