Allo RemoteControl ALLDUCKS 6204 User manual

8
INSTRUCTIONS
Simultaneously, press and hold the buttons “on”and “off”of your new remote control
The LED flashes, comes off then on again
Release the buttons
Your new remote control is now in learning mode
Press the button on your new remote control that you want to program
The LED comes on
Release the button
Enter your personal code by pressing 12 times the buttons on and off
For every push, wait until the LED comes on then off. Release the button
Create your own code
Press both buttons of your remote control
The LED flashes, comes off then on again
Release both buttons
Press the button you wish to program
Enter the code by pressing 12 times on the on and off buttons
Connect your new remote control to your receiver
Press channel 1 of your receiver
ALLDUCKS 6204
Visit our website: www.Alloremotecontrol.com
The LED

TT
The LED comes on
Then press continuously the button on your remote control while the LED of your
receiver is on
Wait until the LED of your receiver comes off then turns on again
Release the button on your remote control
Wait until the LED comes off
Your new remote control is now programmed!
Visit our website: www.Alloremotecontrol.com