Alpine X009-U User manual

X009-U UNIVERSAL 9” INSTALLATION KIT
Kit Assembly Instructions
NOTE: This Universal Mounting Kit is intended for custom vehicle installation
by professional installers with advanced fabrication skills. It is not intended to
be a simple bolt-in installation. Additional parts and materials may be required.
X009-U
Assembly Instructions 1/6

X009-U
Assembly Instructions 2/6

X009-U
Assembly Instructions 3/6

X009-U
Assembly Instructions 4/6
Accessory List
Head Unit Box Parts (X009)
Universal Installation Kit Parts (G-KTX-009-U)
Head Unit Power Harness
Vehicle Mounting Brackets
Key Harness
Head Unit Mounting Brackets Key Panel
Universal Trim Bezel Bracket Mounting Hardware
Bluetooth Microphone
Key Panel Mounting Screws
Quick Reference Guides Registration Cards
X009 X009
USB Extension Cable
X009 Head Unit X009 Camera Harness
X009-U
OM
Alpine
Registration Card NAVTEQ
Registration Card

X009-U
Assembly Instructions 5/6
Kit Assembly Process
Place the radio brackets on the radio and
note the positioning of the holes. The
larger slotted holes should be on the
bottom side of the radio as shown.
1
Assemble the radio and vehicle side
brackets using the supplied bracket screws
and washers. Tighten these bolts just
enough so that the brackets can be
repositioned if necessary.
2
Bolt the assembled brackets to the radio
chassis using the supplied 8mm screws.
3
Note that the vehicle-side brackets allow
for easy radio position adjustment during
installation.
4

X009-U
Assembly Instructions 6/6
Kit Assembly Process (continued)
Attach the key panel into the bezel using
the guides on both sides. Turn the keys
towards the front until they snap into place.
5
Secure the key panel to the bezel using the
three key panel screws provided in the kit.
6
Plug in the key connection harness with the
“external key unit” label to the key unit and
the 3.5mm “MIC IN” pig tail to the head unit.
Note the pigtail connection for the included
Bluetooth microphone.
7
Now the Universal Installation Kit is
assembled and ready for custom installation
in the vehicle. Note that trimming and drilling
of the mounting brackets may be required for
proper installation of this kit*.
8
Bluetooth
microphone
input
*Note: Any modifications to the mounting
bracket may void the bracket’s warranty.
Contact Alpine tech support at 1-800-
TECH101 if you need assistance.