Alpine TEC234BR-UK User manual

Owner’s Manual
Quesons?
Please See Contact Details on the Back!
Three Tier Barrel Pump
Fountain - Brown
v12.0
USA Item No: TEC234BR
UK Item No.: TEC234BR-UK

1
CONTENTS
Contents ...................................................................... 1
What’s Included ........................................................... 2
Features ...................................................................... 3
Specications .............................................................. 3
Assembling & Using Your Product............................... 4
Replacement Parts...................................................... 8
Troubleshooting........................................................... 9
Caution ...................................................................... 10
Limited Warranty Information .....................................11
Notes ......................................................................... 12

2
WHAT’S INCLUDED
Large Bucket
x1
Body
Pump
x1
Tubing
x3
*Pump may be packaged separately in an outer box located in the
outer Styrofoam packaging.
Medium Bucket
x1
Small Bucket
x1
Pump
Handle
x1
Large
Panel
x1
Medium
Panel
x1
Small
Panel
x1
Pump
x1
Screws
x19

FEATURES
3
FEATURES
Realistic faux
wood barrels
Includes ETL
listed pump
Durable plastic
construction
SPECIFICATIONS
Country Power
Requirement
Water
Capacity
Tubing Inner
Diameter
USA 120 V, 60 Hz 11.9 gal 0.51"
UK 230V, 50 Hz 45 L 13 mm

4
ASSEMBLING & USING YOUR PRODUCT
Unpack all components carefully. Check the packaging to ensure all of
the parts have been removed.
*Some splashing may occur when the fountain is in use.
1. Attach the Small Bucket to the Medium Panel of the fountain
base by attaching two screws through provided holes on the
bottom of the Medium Panel to the mounting holes on the bottom
of the Small Bucket. Then repeat this process with the Large
Panel and Medium Bucket.
2. Remove the pump from its packaging and adjust the ow control
to the lowest setting to avoid splashing until the fountain is
completely assembled
Alpine Quick Tip #1
Turn to the Right / Clockwise
to turn down the water ow.
Turn the adjuster to the Left /
Counter-Clockwise to turn up
the water ow.

5
ASSEMBLING & USING YOUR PRODUCT
3. Place the pump into the Large Bucket, and then place the
Medium Bucket with the attached Large Panel on top of it. the
Use four of the Screws to secure the Large Panel to the Large
Bucket. Note: Be sure the cord is routed through the cord slot
in the back. Now repeat this process for Small Bucket with the
attached Medium Panel.
4. Attach the pump Handle to the Pump Body by lining up the screw
holes and securing a Screw.

6
ASSEMBLING & USING YOUR PRODUCT
5. Now attach the Pump Body to the Small Panel with the Screws
and attach the Small Panel to the top of the Small Bucket with
four Screws.
6. Next Install the Tubing into the fountain. Each Piece will attach
from Top to bottom of each bucket. With Pump connecting at the
bottom of the Large Bucket.
1
2
3

7
ASSEMBLING & USING YOUR PRODUCT
7. Gently pour water into the fountain basin, being careful not to
overow and cause splashing. Make sure the water completely
submerges the pump and the water runs clear during operation.
NOTE: We recommend that you use distilled water to prevent scale
build-up. It can take up to 5 minutes for the air to be completely
expelled and water begins to ow the rst time you operate the
pump.
8. You can now adjust the water pump to your ow preference.
(see Quick Tip)
9. Plug the pump into your local power supply. Make sure that there
is no water around the plug & always keep the power source in a
dry place

8
REPLACEMENT PARTS
ALSO AVAILABLE FROM ALPINE
Country Fountain Care
Formula
Americana®
UV Acrylic
Sealer
Touch-Up
Paint Kit
USA PPL102 RRR106 RTD102
UK N/A N/A N/A
10. Congratulations, your fountain is now complete. Don’t forget to
add water regularly as water will evaporate over time.
REPLACEMENT PARTS
For parts or additional help with your new product,please contact
Alpine customer service.