Alpine TZL199 User manual

Have Questions or Issues? Need help with assembly?
Contact us and we will resolve them within 12 hours.
Support Hours: M-F 7:30-5:00 (U.S. Pacic Time)
Call:
877-460-4511
Text:
323-201-4431
Email:
[e-mail]
Owner’s Manual
Rainforest Floor Fountain
with LED Lights
and Bluetooth Speaker
v1.0
Item # TZL199

1
CONTENTS
What’s Included ........................................................... 2
Features ...................................................................... 3
Specications .............................................................. 3
Assembling & Using Your Product............................... 4
Pairing & Using Your Speaker(s)................................. 7
Pairing Troubleshooting............................................... 9
Fountain Troubleshooting .......................................... 10
Replacement Parts.................................................... 10
Caution .......................................................................11
Also Available from Alpine ..........................................11
Limited Warranty Information .................................... 12

2
WHAT’S INCLUDED
Fountain x1
(LED lights pre-installed)
Transformer and Socket
Connector x1
Submersible Pump x1
Back Door x1
*Pump may be packaged separately in an outer box located
in the outer Styrofoam packaging.

FEATURES
3
FEATURES
SPECIFICATIONS
Power Requirement............................Standard Household 120V
Water Capacity .............................................. 16.9 Gallons (64 L)
Tubing Diameter ............................................................0.75" I.D.
Add your
favorite music
to the soothing
sound of
owing water
to create the
perfect relaxing
environment.
LED lights in each tier of this fountain are long-lasting,
energy-efcient, and create a stunning nighttime display.
Made of
weather-resistant
Polystone.
Bluetooth
Speaker. Can
pair up to
two TZL199
fountains to
any Bluetooth
enabled device.

4
ASSEMBLING & USING YOUR PRODUCT
Unpack all components carefully. Check the packaging to ensure that
you have removed all of the parts. Some splashing may occur when
the fountain is in use.
1. Place the fountain base on a smooth and level surface. Allow
enough space to access the pump through the back door.
2. Remove the pump from its packaging and adjust the ow control
to the lowest setting to avoid splashing until the fountain is
completely assembled.
3. Pull the vinyl tubing through the back opening of the fountain and
connect it to the pump using the black tube connector.
Alpine Quick Tip #2
The tube connector may be
attached to the vinyl tubing or
to the pump depending on the
product. It is shown attached
to the pump here.
Tube Connector
Alpine Quick Tip #1
Turn counter-clockwise to reduce
the water ow. Turn clockwise to
increase the water ow.

5
ASSEMBLING & USING YOUR PRODUCT
4. Place the pump with the suction feet facing down on the bottom of
the reservoir inside the fountain.
5. Pull the LED light/speaker cord from the back of the fountain and
connect it to the transformer. Slide the protective cover over the
connection and turn clockwise to securely tighten.
6. Without splashing, gently pour water into the fountain. Using
distilled water prevents scale build-up. Do not allow the water to
overow! Make sure the water completely covers the pump.
7. Plug the transformer and the plug from the pump into your local
power supply. The pump with turn on and the fountain will begin to
run.
Alpine Quick Tip #3
Make sure that there is no water
around the plugs and always keep the
power source in a dry place. Plug the
power cords into a properly grounded
GFCI outlet when using outdoors.

6
ASSEMBLING & USING YOUR PRODUCT
8. You can now adjust the water pump to your ow preference as
shown in Alpine Quick Tip #1. Once set, push all the cords into the
slotted corner and slide the back door into the back opening of the
fountain.
9. Congratulations, your fountain is now complete. Don’t forget to add
water regularly, as water will evaporate over time.
Alpine Quick Tip #5
Because there is air
in the pump and water
lines, it can take up to 5
minutes for the pump to
expel the air completely.
Then the water will ow
properly. Make sure the
water runs clear during
operation.
Alpine Quick Tip #4
The back door is designed with a
slotted corner to hold the electrical
cords in place.

7
PAIRING & USING YOUR SPEAKER(S)
You can pair up to two TZL199 fountain speakers to a phone or
Bluetooth enabled device. Speakers should be within 25 feet (7.6 m) of
each other. Bluetooth device range is 50 feet (15 m).
BEFORE YOU BEGIN: Make sure the transformer is plugged in and has power.
Open the white protective cover on the back panel to access the controls. Make sure
your Bluetooth device is on and within 3 feet of the fountain.
Pairing One Speaker with a Bluetooth Device
1. Press the red ON/OFF button to turn your speaker on. You will
hear “Alpine Corporation” and the Bluetooth Indicator Light will
ash between red and blue.
2. Make sure your Bluetooth device is within 3 feet of the speaker
and is turned on with your Bluetooth set to search for devices.
◊ Pairing an iOS Phone/Device:
-Go to Settings > Bluetooth. Make sure Bluetooth is ON.
◊ Pairing an Android Phone/Device:
-Go to Settings >Bluetooth.
-Search for devices. Make Sure Bluetooth is ON.
◊ Pairing other Cell Phones/Devices:
-Review the instruction manual that came with your phone/device.
3. Select “Alpine Corporation TZL199” from the list of discovered
Bluetooth devices. You will hear “Bluetooth is connected” when the
device connects to the speaker.
4. After a successful pairing, you will hear a tone and the Bluetooth
Indicator Light will slowly ash blue. Your device will be paired
anytime it is on and you are within range.
PAIRING & USING YOUR SPEAKER(S)
Open White
Protective Cover
ON / OFF
Button
Bluetooth
Indicator Light
PAIR
Button
Back
Panel
on Back
Fountain

8
PAIRING & USING YOUR SPEAKER(S)
Pairing Two Speakers with a Bluetooth Device:
NOTE: Read the detailed instructions for “Pairing One Speaker with a Bluetooth
Device” before beginning. You will pair the speakers to each other and then pair your
device to the speakers. The speakers can be placed within 25 feet of each other.
1. Press the red ON/OFF button to turn both speakers on. You will
hear “Alpine Corporation” from both speakers.
2. Push the PAIR button twice quickly on one of the back speaker
panels. You will hear “Bluetooth is connected” when the speakers
connect to each other. The main speaker Bluetooth Indicator Light
will ash red and blue and the sub speaker Bluetooth Indicator
Light will ash blue.
3. Make sure your Bluetooth device is within 3 feet of the main
speaker and is turned on with your Bluetooth set to search for
devices. See Step 2 on Page 7 for more detail on pairing for
different devices.
4. Select “Alpine Corporation TZL199” from the list of discovered
Bluetooth devices. You will hear “Bluetooth is connected” and
after a successful pairing, a tone will be heard and the Bluetooth
Indicator Light on both speakers will slowly ash blue. Your device
will be paired anytime it is on and within range.
Playing Music
To enjoy wireless music on your fountain speaker from your connected
Bluetooth device, open your media player and press PLAY. Control the
music and volume from your connected device.
Changing Paired Devices
The speaker(s) can only be paired to one Bluetooth device at a time.
To change devices, rst unpair the speaker from the current device.
On your device’s Bluetooth settings, select “Alpine Corporation
TZL199” and press unpair or disconnect and then press forget device.
Follow Step 3 on Page 7 to connect speaker(s) to your new device.
Unpairing Speakers from Each Other
Follow instructions to unpair your device from the speakers. Then
to unpair the two speakers from each other, push the PAIR button
on one of the speakers twice quickly. You will hear “disconnected”
and both speaker’s Bluetooth Indicator Lights will ash. You can now
connect them separately to two different Bluetooth devices.

TROUBLESHOOTING
9
PAIRING TROUBLESHOOTING
If you have any questions or problems, please contact the retail store
where you purchased this speaker fountain.
Speaker(s) Not Connecting to Bluetooth Device
1. If your device does not show “Alpine Corporation TZL199” in your
Bluetooth List:
-“Alpine Corporation TZL199” will not appear in your Bluetooth List
when it is connected to another device.
-Make sure all devices previously connected to the speakers are
all disconnected. Remove “Alpine Corporation TZL199” from the
Bluetooth List on those devices.
2. Make sure your speaker(s) have power. If the LED lights are on,
make sure the red ON/OFF button is pressed in the On position.
3. Make sure your Bluetooth device is turned on, is set to search for
devices and is located within 3 feet of the main speaker.
Only One Speaker Has Sound
1. Make sure both fountains have power, the speakers are turned on
and within 25 feet of each other.
2. Your speakers must be paired to each other before your Bluetooth
device can be connected.
-If your Bluetooth is connected, make sure the Bluetooth indicator
lights on both speakers are slowly ashing blue. If one is ashing
red and blue and the other is slowly ashing blue, it means your
device is paired to the speaker slowly ashing blue.
-Unpair and disconnect your Bluetooth device and then follow step
2 for “Pairing Two Speakers with a Bluetooth Device” to pair the
speakers to each other. Then continue with steps 3 and 4 to pair your
Bluetooth device.
3. You must have only one “Alpine Corporation TZL199” in your
Bluetooth List. If your device shows “Alpine Corporation TZL199”
twice on your Bluetooth List, you must remove both on your
device:
-iOS devices: go to settings>Bluetooth> click the (i) icon > forget
device
-Android devices: go to settings> Bluetooth > click Gear icon> click
unpair
4. Then follow steps for “Pairing Two Speakers with a Bluetooth
Device”.