Alpine QLP542SLR-GR User manual

Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains,
Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials.
In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion,
within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided.
Photos of defective merchandise will also be required to help distinguish the actual cause of the defect. Please
read below for a detailed description of warranty coverage.
Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper storage that
allows water to freeze within a product may cause damage, is considered negligence, and will not be
covered under this warranty. The use of “hard water,” and/or caustic cleaners, can affect the painted
or other finishes. Failure to keep the unit clean, and use of such additives/cleaners, will also void the
warranty. Please note: for fountains, it is normal for some splashing to occur and protecting the
immediate surfaces is not the responsibility of Alpine Corporation.
Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up using standard
paint. The paint is designed to protect the entire finish against breakdown of color. As with any
product, all finishes with time will gradually fade and discolor. The warranty will only cover against
severe or complete fading, within the first year from date of purchase, with the above exclusion.
Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you purchased the
product. If that is not an option, you can contact Alpine Corporation at www.alpine4u.com. When
contacting Alpine Corporation, you must be prepared to show proof of purchase, provide photographs
and any other information needed to validate your claim. This may be necessary to distinguish
between a partial or complete replacement of a defective product. The warranty does not cover any
items with multiple parts; the warranty will ONLY cover the individual component of the unit/item that
may be defective. Replacement parts can be made available to a consumer through the original selling
party, or an approved parts retailer. If this is not an option, contact our customer service department.
Item is covered under one year limited warranty from the date of purchase. When requesting
replacement parts due to a warranty claim after 30 days of purchase, credit card information will be
requested for shipping charges.
Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to:
1. Damages caused in Transit
2. Inadequate care and/or neglect
3. Environmental and/or natural elements
4. Immersion in water, unless specified
5. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper installation and/or
modifications have occurred. This includes any and/or all defects arising out of freezing water damage, hard water
damage, failure to keep the unit clean and free of harmful additives such as bleach, chlorine, etc…. which affects the
paint and/or parts. This warranty also does not cover any additional charges or installation, removal, disposal
and/or shipping costs or consequential damage associated with any warranty claim.
QLP542SLR-GR
Solar Bluetooth-Enabled
Rock Speaker

In The Box:
1 - Sol Sound Solar and Bluetooth Speaker
2 –USB Cable for Charging
Charging the Speaker with a USB cable
1. Plug the small end of the Micro USB Charging Cable into the Micro USB port
on the back of the speaker.
2. Connect the larger end of the Micro USB Charging Cable into your computer
or other USB charging device. Recommended charge time with a USB cable is
2-3 hours.
3. When charging is complete, remove the Micro USB Charging Cable from the
speaker.
\
** When the Speaker is charge the LED light will turn on RED, when the Speaker is fully
charged the LED light will turn on GREEN.
Charging the Speaker with the Solar Panel
Sol Sound Solar and Bluetooth Speaker comes with a built-in rechargeable battery.
Prior to using the speaker for the first time, it is recommended to charge the battery fully
for the first time.
1. Place the speaker under direct sunlight or in a brightly lit room so the speaker
can begin charging. Recommended charge time using the Solar Panel is 8
hours. It is important you charge the speaker for at least 8 hours before using
it for the first time.
*Charge times may vary depending on solar conditions.
Basic Operation
Powering On/Off
Push the power button on the back of the speaker to turn the speaker ON or OFF.
Pairing the Speaker with a Bluetooth-enabled Device
1. Turn the speaker ON.
2. A tone will be heard and the Bluetooth indicator light will quickly flash BLUE
and GREEN.
3. Keep the speaker and Bluetooth-enabled device within three feet of each
other during the pairing process. Set your Bluetooth-enabled device to search
for the Bluetooth devices.
4. If there are no paired devices in range when the speaker is turned on, it will go
into pairing mode automatically. If a paired device is in range, the speaker will
connect to it automatically.
-Pairing an iOS Phone/Device:
Go to Settings > BLUETOOTH (Make sure Bluetooth is ON)
-Pairing an Android Phone/Device:
Go to Settings > Bluetooth
Search for devices. (Make Sure Bluetooth is ON)
-Pairing other Cell Phones/Devices:
Review the instruction manual that came with your
phone/device.
5. When the Bluetooth device finds the speaker, select “Alpine Corporation” from
the list of discovered Bluetooth devices.
6. After a successful pairing, a tone will be heard and the Bluetooth indicator light
will light up GREEN.
Notice: If you would like to pair the speaker to another device, you must unpair the
speaker from the currently paired device first. On your device’s Bluetooth settings,
select “Alpine Corporation”, then select unpair. When the speaker has been unpaired, it
automatically goes into pairing mode again.
** Note: Multiple Rock Speakers cannot be paired to the same device at the same time.
Use one Rock Speaker per device.
Playing Music
To enjoy wireless music on your Bluetooth speaker, make sure that you are connected
to a Bluetooth enabled device. Open your media player and press PLAY. Once
playback begins, you can control the music and volume from your connected device.
Playback time on built-in battery is approximately 12 hours, depending on music level
and other factors.
Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains,
Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials.
In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion,
within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided.
Photos of defective merchandise will also be required to help distinguish the actual cause of the defect. Please read
below for a detailed description of warranty coverage.
Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper storage that
allows water to freeze within a product may cause damage, is considered negligence, and will not
be covered under this warranty. The use of “hard water,” and/or caustic cleaners, can affect the
painted or other finishes. Failure to keep the unit clean, and use of such additives/cleaners, will
also void the warranty. Please note: for fountains, it is normal for some splashing to occur and
protecting the immediate surfaces is not the responsibility of Alpine Corporation.
Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up using
standard paint. The paint is designed to protect the entire finish against breakdown of color. As
with any product, all finishes with time will gradually fade and discolor. The warranty will only
cover against severe or complete fading, within the first year from date of purchase, with the
above exclusion.
Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you purchased
the product. If that is not an option, you can contact Alpine Corporation at www.alpine4u.com.
When contacting Alpine Corporation, you must be prepared to show proof of purchase, provide
photographs and any other information needed to validate your claim. This may be necessary to
distinguish between a partial or complete replacement of a defective product. The warranty does
not cover any items with multiple parts; the warranty will ONLY cover the individual component
of the unit/item that may be defective. Replacement parts can be made available to a consumer
through the original selling party, or an approved parts retailer. If this is not an option, contact
our customer service department. Item is covered under one year limited warranty from the
date of purchase. When requesting replacement parts due to a warranty claim after 30 days of
purchase, credit card information will be requested for shipping charges.
Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to:
1. Damages caused in Transit
2. Inadequate care and/or neglect
3. Environmental and/or natural elements
4. Immersion in water, unless specified
5. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper installation and/or
modifications have occurred. This includes any and/or all defects arising out of freezing water damage, hard water
damage, failure to keep the unit clean and free of harmful additives such as bleach, chlorine, etc…. which affects the
paint and/or parts. This warranty also does not cover any additional charges or installation, removal, disposal
and/or shipping costs or consequential damage associated with any warranty claim.