Altec Lansing Hydrabuds MZX6000 User manual

QUICK START GUIDE ITEM: MZX6000 ITEM: IMT800
Hydrabuds
Truly Wireless Earphones
ITEM:
VOICE COMMANDS

ITEM: MZX6000 ITEM: IMT800
IN THE BOX
1.
1 Hydrabuds
1 Pair S, M, L Silicone Ear Tips
1 Pair S, M, L Memory Foam Ear Tips
1 Pair S, M, L Helix Wings™
1 Pair Bumpers
1 Charging Case
1 USB-C Charging Cable
1 Quick Start Guide

A CLOSER LOOK
3.
Right
Earbud
Left
Earbud
Status LED
Indicators
Battery Level
LED Indicators
Charging Case
Multifunction Button
Battery Level
Display Button

CHARGING
4.
Charging Case Battery Level
1. To power the charging case, insert the USB-C cable into
the charging port located at the back of the charging case.
2. Insert the standard USB cable into any suitable USB port.
3. The Battery Level LED Indicators will light up according to
the battery capacity.
4. You can see the case battery level at any time by
pressing the button on the right hand side of the case.
1
4
2
0-24%
25-49%
50-74%
75-99%
100%
3

AL Hydrabuds
Available devices
Bluetooth
BLUETOOTH PAIRING
5.
Multipoint Bluetooth Connection:
With the multipoint connection function, you can connect up to
two devices with your earbuds (i.e. a smartphone and a
computer).
•To activate multipoint connection, go to the Bluetooth menu of
the device already paired to your earbuds and turn Bluetooth
OFF. The earbuds will disconnect from your device and
become available for pairing to a second device.
•Pair earbuds to your second device.
•Turn Bluetooth back ON on your first device and the earbuds
will auto-reconnect to it. You now have two devices paired and
can use either for music or calls.
Low Battery
Charging
Fully Charged
Powering ON/Pairing:
When the case is opened, the earbuds will first connect to
each other then enter pairing mode.
When in the case the earbud LEDs show their charge status:
**Note: If the earbuds have been previously paired to a
nearby device they will automatically re-connect to it.
Bluetooth Connection:
Go to the Bluetooth page in the settings
app on your phone. Make sure Bluetooth
is ON before connecting to the available
device ‘AL HydraBuds’.
When removed from the case the earbud LEDs
show their pairing status:
Pairing
Connected