Altec Lansing EVOLUTION II User manual

Make sure the following items are included in your package.
USB Cable
Item # MZX667
Quick Start Guide
Charging Your Headphones
These headphones include a Micro USB cable that can be connected to your
computer or charging adapter to charge the internal battery. Plug the Micro USB end
of the included cable into the Micro USB port under the left ear-cap of the headphone.
Plug the other end into a USB port on your computer or USB charging adapter. The
LED indicator will flash RED while charging. Once fully charged, the indicator light will
turn o. A full charge will take around 2 hours to complete. A fully charged battery
has enough power to last for 10 hours talking and/or music time, and up to 200 hours
standby time.
Note: These headphones feature a built-in lithium ion battery. Please charge for at
least 4 hours before using for the first time, to help condition the internal battery.
For a look at the various buttons and parts of your headphones, view the graphic below
1. Previous Song/Volume +
2. Next Song/Volume -
3. Microphone
4. Micro USB Charging Port
5. Line-in
6. Power Button, LED Light
Pairing Your Headphones With A Bluetooth Device
Ensure that your device is powered on.
To pair the headphones with a device it has not been previously paired with, first power on the headphones following the previous steps. Your headphones will enter pairing
mode.
Turn on the Bluetooth on your phone or tablet, and search for available devices.
Select “BT-1050” from the list of found devices on your Bluetooth device.
When Bluetooth is paired successfully, there will be a prompt tone, and the flashing BLUE light will turn solid.
Note: If your headphones have been previously paired with another device, they will automatically connect to it if it is powered on and in range of the headphones.
Wearing Your Headphones
For the best sound performance and a secure, comfortable fit, be sure that the
ear cups rest gently on your ear, and the frame sits securely on top of your head.
Listening To Music
Powering ON/Powering OFF Your Headphones:
Press and hold the Power button for approximately two seconds to power on your
headphones. The LED indicator will flash BLUE briefly. The headphones will enter
pairing mode, and the LED will flash BLUE rapidly. When the headphones are
connected to a device and ready for use, the LED will stay lit BLUE.
Once powered on, you can press and hold the Power button again for approximately
three seconds to power o your headphones. The LED indicator light will briefly turn
RED before powering o.
NOTE: In order to save power, your headphones will automatically power o if left
unpaired and idle for over three minutes.
Play/Pause
Press the Power button to play or pause music from your audio device.
Next/Previous Song
Quickly press the Next Song or Previous Song buttons to advance to the next song, or
go back to the previous one.
Increase/Decrease Volume
Press and hold the Volume Up or Volume Down buttons to increase or decrease the
volume.
NOTE: Music will automatically pause when a call is dialed out, or when there is an
incoming call. It will resume when the call ends.
Using Your Headphones During Phone Calls
Making a Call
To make a call, use your mobile phone as you would normally with the headphones
connected to it. The audio will come through the headphones seemlessly.
Answering an Incoming Call
To answer an incoming call, quickly press the Power button.
Ending a Call
To end a call, quickly press the Power button, and the call will be disconnected.
Adjusting Volume
By pressing the Volume Up or Volume Down buttons you can increase or decrease
the volume of the phone call.
MZX667
EVOLUTION II
Bluetooth
Headphones
AUX Cable
Storing Your Headphones
The ear cups of your headphones can fold in, making it easy to store when not in use.
Using Your Headphones Wired
You can use these headphones with the included AUX cable. Connecting the headphones with the AUX cable will disable the wireless functionality.
1
2
3
4
5
6
BLUETOOTH HEADPHONES
EVOLUTION II

Item # MZX667
Quick Start Guide
Altec Lansing One Year Warranty Card
This warranty covers the original consumer purchaser only and is not transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be
repaired or replaced at no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but
limited to, repair by unauthorized parties, tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting Information:
Call 1-855-292-4087 or Visit our website at www.alteclansing.com.
To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for
problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within
the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any
defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service
center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center
that are not covered by warranty will be returned unrepaired.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE
SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED
ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO
THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE
PRICE - AT DISTRIBUTOR’S SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL
DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL,
PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS,
SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED
HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY
AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT
AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so
limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or
province to province. Contact your authorized retailer to determine if another warranty applies. This product is manufactured, distributed and sold by
SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed or approved this product.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference , and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
OTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates. Uses and can radiate radio frequency energy and, if not installed and used in accordance with
instructions. May cause harmful interference to radio or -television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
__ Reorient or relocate the receiving antenna.
__ Increase the separation between the equipment and receiver.
__ Consult the dealer or experienced radio/ TV technician for help.
__ Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Technical Support
For technical support issues, please visit our website at www.alteclansing.com
You can find manuals and FAQ’s at the website. Can’t find what you are looking
for? Call 1-855-292-4087 to access our technical support information on the
phone.
ANDROID IPHONE COMPUTERS IPODS TA BLE T S
BLUETOOTH HEADPHONES
EVOLUTION II