AlteredStates BT Pro User manual

BT Pro LCD
Multi-Function
Frequency Generator
By
Altered States Ltd
altered-states.net

2
Congratulations and Thank You!
You have purchased one of the finest Frequency enerators available in
the world today. This BT Pro LCD V4 unit is designed to give you many
years of reliable service.
Please read this instruction manual carefully before use
This unit is very easy to use and the various settings and sub-programs
are easily found.
For further study and information, a Bibliography of recommended reading
is found at the back of this manual.
There is a lot of electro-medical information freely available today from
many varied sources. Medical science in this field has certainly advanced
tremendously within the last 100 years since it was first proposed.
Currently, there is an enormous worldwide, market driven interest in this
whole subject.
We trust that this BT Pro LCD unit will help in your research as you explore
the wonderful and exciting world of frequency generation….ENJOY!
The Team at Altered States

3
INDEX
Introduction ……………………………………………………………………………………… … 2
Index ……………………………………………………………………………………………………. 3
Di claimer ……………………………………………………………………………………………….4
Diagram ………………………………………………………………………………………………….5
Technical Specification ……………………………………………………………………………..6
De cription. ……………………………………………………………………………………………. 7
Battery Charging ……………………………………………………………………………………... 8
Entering Option Code………………………………………………………………………………….9
Inten ity Adju tment ………………………………………………………………………………...10
Bibliography……………………………………………………………………………………………27
SECTION 1 BT PRO LCD BASIC UNIT
BT+ ……………………………………………………………………………………………………. 11
Biofeedback ………………………………………………………………………….……………….13
Temperature…………………………………………………………………………………………...14
SECTION 2 ADDITIONAL PROGRAMS (Add-On Program )
Eyemate……..………………………………………………………………………………………... 15
Magna tim …………………………………………………………………………………………… 16
Chakra Balance ………………………………………………………………………………………19
SleepMate ……………………………………………………………………………………………..21
BB Zapper ……………………………………………………………………………………………. 22
Colloidal Silver ………………………………………………………………………………………..24
Super Sweep Frequency Zapper …………………………………………………………………. 25
T.E.N.S.………………………………………………………………………………………………….27
Sacred Harmony …………………………………………………………………………………….. 28
Brainwave Frequencie ……………………………………………………………………………...29
Life tim………………………………………………………………………………………………….30
Alpha……………………………………………………………………………………………………..31
Bibliography…………………………………………………………………………………………....32

4
DISCLAIMER
Plea e Note that our legal advisors have instructed us to issue the following
disclaimer so as to comply with international trading agreements regarding
this electronic frequency generating device.
Altered State product are old for learning, elf-improvement and
imple relaxation. No statement contained in this publication, and no infor-
mation provided by any Altered States employee, should be construed as a
claim or representation that these products are intended for use in the diag-
nosis, cure, mitigation, treatment or prevention of disease or any other
medical condition. The information contained in this publication is deemed
to be based on reliable and authoritative report. However, certain persons
considered experts may disagree with one or more of the statements
contained here. Altered States assumes no liability or risk involved in the
use of the products described here. We make no warranty, expressed or
implied, other than that the material conforms to applicable standard
specifications. The publisher does not accept any responsibility for the
accuracy of the information or the consequences arising from the
application, use, or misuse of any of the information contained herein,
including any injury and/or damage to any person or property as a matter of
product liability, negligence, or otherwise. No warranty, expre ed or
implied, i made in regard to the content of thi material. No claims or
endorsements are made for any drugs or compounds currently marketed or
in investigative use. Thi material i not intended a a guide to
elf-medication. The reader is advised to discuss the information provided
with an authorized healthcare practitioner and to check product information
(including package inserts) regarding dosage, precautions, warnings, inter-
actions and contraindications before administering any drug, herb, elec-
tronic tool or supplement discussed herein.

5
DIAGRAM
1
2 3
4
5
6
7
8
9
10
11
12
13
1—Battery Level indicator
2—Frequency Output
3—Power Charger input
4— ntensity Level ndicator
5—Program Display
6—Type of Level indicator—kHz,
%, C°, F° etc
7—SELECT button
8—Main Power Switch
9—DOWN button
10—UP button
11—POWER ON/OFF button
12—Power Warning Sign
13—Timer Clock

6
TECHNICAL SPECIFICATIONS:
Size: 60 x 100 x 21 (mm)
Weight: 100 g
Battery: 1 x N -MH AA (1.2V 2300mAh)
Power input: 5V 1A via Mini USB port
Output: 0 - 60 Vp-p via 3.5 mm stereo socket
Timer: 5 - 100 min. on 5 min step
Battery level bar numbers: 5
ntensity level bar numbers: 9
Display: LCD
Display Backlight: Single LED, white colour
Battery Current: Power off, < 1 mA
Program run, normal 10 mA, max. 30 mA
IMPORTANT!
To o erate and charge this unit switch
the on/off switch on the right hand side
of the unit to the ON osition.
When the unit is not in use, switch to OFF to save
battery life and condition
PLEASE NOTE:
The unit will not charge if this switch is off

7
DESCRIPTION
The BT Pro LCD (LCD – liquid crystal display) is a multi-functional high output frequency
generator which combines many previous machine functions into just one unit.
This compact size and its powerful integrated performance enhances the high precision
of the output frequencies.
Every time a button is pressed the unit will ’beep’.
If no button is pressed within one minute, the unit will turn itself off.
When the program is finished, two beep sounds will be heard to indicate that the process
has ended and the screen will turn off. Pressing the ‘POWER’ (11) key will instantly ter-
minate any program at any time during processing.
Please note: For extra safety the unit cannot be used while the batter-
ies are being charged. We recommend all programs will require you to
set up and connect the necessary electrode and/or cables before
beginning any session

8
Battery Charging:
The battery level icon is at top left of the LCD screen (below). Full 5 blocks
means battery is full, less number of blocks means less battery power. If no
block is illuminated this means that the battery level is very low and must be
charged. When the battery is being charged, an underscore line will flash
under the battery block and CHA will show on the LED screen.
Please note:
*While the battery is being charged, no programs will operate.
*The battery can be charged at anytime, no matter if it’s high or low.
*It is best to charge the battery after each use.
*Charge the battery with Mini USB cable into the 5V DC adaptor only or PC
USB port power.
*IMPORTANT*
Plea e en ure the correct adaptor i u ed for charging. 5 volt ONLY!
U ing the incorrect charging tran former will void all warranty.
If the Main Power Switch (8) is switched off during charging, a bad quality
battery or the end of the battery life is recognised, an ERROR icon will ap-
pear (as shown below).
Battery icon
IMPORTANT!
To o erate and charge this unit switch
the on/off switch on the right hand side
of the unit to the ON osition.
When the unit is not in use, switch to OFF to save
battery life and condition
PLEASE NOTE:
The unit will not charge if this switch is off

9
Enter option code:
The basic BT Pro LCD comes with software containing BT+ and Biofeedback and
temperature gauge, all other functions are optional and can be activated by pur-
chasing a key code. Every optional function has their unique code and associated
with its serial numbers.
To activate optional functions:
press and hold UP (10) key then switch the side power switch up to the ON posi-
tion.
When this enters the programming mode the LCD will display 4 zero’s (as shown
below) and the first on the left will be flashing.
Press UP (10) or DOWN (9) to select code number / letter.
After each correct number/letter is shown press SELECT (7)
repeat until all 4 digits are entered.
If the code was matched then display will show the program abbreviation for 3
seconds then the digits will turn back to 4 zero’s for the next key code to be en-
tered.
If only one code is entered switch the side Main Power switch off.
Turn this switch back on and Power (11) to check that this has been saved to the
units memory.

10
Inten ity adju tment:
FOR SAFETY REASONS,
ALL PRO RAMS BE IN WITH THE INTENSITY FULLY OFF
While any program is running, press UP (10) key or increase output voltage and
DOWN (9) key to decrease output voltage. Output intensity level corresponds to
LCD intensity bar (4). More segments means higher output level. Intensity cannot
be adjusted for some of the functions like Colloidal Silver etc.
Please note: each press or continuous hold of the UP (10) button will increase the
intensity. Press the UP button until you can feel a gentle ‘tingle’ or sensation from
the electrodes.
It is not necessary to feel any sensation. Many people do not. The frequencies
are still present. However, many people prefer to be assured that the program is
in fact working. In this case use the intensity level to your own per onal comfort
level. All programs will begin with the intensity FULLY OFF as a safety feature.
Output Current Te t Plug
You can test the output signal by inserting the Test Plug supplied. Insert this into
the electrode OUTPUT (2) and while a program is running and the intensity is
turned up the red LED will flash at the same frequency rate. This will confirm that
a signal is present at the output of this device.
Output Current Test plug

11
SECTION 1 BT PRO LCD V4
BT+ (Brain Tuner Plu ):
Our most popular
and useful Program!
BT+ (Fig 9) is the basic function and includes these frequencies:
0.5Hz, 1.5Hz, 5Hz, 7.83Hz, 10Hz, 15Hz, 100 Hz , 500Hz, 528Hz, 15000Hz, BT11.
It outputs a bi-polarity equal pulse width square waveform.
Timer selections are from 5 to 100 minutes.
EASY STEPS TO OPERATE:
1) Drink a large glass of water 10-15 minutes prior to beginning any session.
2) Connect the ear clips or gel pads as shown on pages 12 and 27
3) Switch the Main Power Switch to the up (on) position (8).
4) Press the red Power button (11) to power the unit on.
5) Scroll up or down to choose the BT+ program. The selection will flash until you select this
by pressing the Select button (7)
6) Set the timer by scrolling up/down to choose the desired running time of the program.
Press Select (7) to confirm and program this. The timer will flash until this has been pro-
grammed.
7) Select the frequency you wish to use by scrolling up/down and pressing Select (7) to pro-
gram this. The frequency will flash until this has been programmed. At this stage the program
will begin and the timer will begin counting down.
8) Raise the Intensity by pressing or press and hold the up button (10) to raise the intensity to
a comfortable level. The program will finish and the unit will switch off once the timer counts
down to zero.
Select program
Set intensity
Set timer

12
Ear Clip Placement:
Clean the ear lobe of any grease or dirt. Wet
the lobe with saline (salty water or saliva)
and place the electrode ear clip as shown.
FREQUENCIES
0.5Hz
The 0.5Hz DELTA brainwave frequency, normally associated with deep
sleep and release of deeply embedded stress patterns. May help with pain
relief (temporarily), natural opiates released, supports the immune system,
stress buster.
1.5Hz
May experience pain relief and can promote quiet sleep
5.0Hz
‘In the Palaces of Memory’ they suggest 5Hz as being the optimum learn-
ing frequency. Even as you read these words, a tiny portion of your brain is
physically changing. New connections are being sprouted – a circuit that
will create a stab of recognition if you encounter the words again. Supports
the body to repair and heal.
See Bibliography for more information.
7.83Hz
The 7.83Hz Alpha Theta (border) brainwave frequency and it’s associated
with a relaxed, but very focused mental state. This is also the Schumann
frequency. Ideal for meditation and relaxation.
15Hz
Experimental Frequency for Depression, Anxiety and Insomnia
100Hz
Elevate the mind, less stress and increase the sense of wellbeing.
500Hz
Experimental Frequency for Depression, Anxiety and Insomnia
15 kHz
Experimental Frequency for Depression, Anxiety and Insomnia
528Hz
Sacred DNA frequency. Use the gel pads on forehead (see placement pic
on page 25)
BT11
Brain tuner (original Black Box), endorphin release, natural mood
enhancer.
See Bibliography for more information

13
BIOF : (Bio-Feedback)
Bio-Feedback is used to measure skin resistance.
After BIOF is selected, press SELECT (7) key to start the program. There is no timer or
intensity and cannot be adjusted. There is no output from output jack (2). This meas-
ures skin resistance from the 2 silver electrodes located on the left hand side of the BT
Pro device.
Hold the unit in your right hand and place the forefinger and ring finger on each bio
input pad. Measuring value will be displayed in percentage mode or absolute resis-
tance mode in K ohms readings.
For percentage mode the value will be from 0 to 99. Lower value means higher resis-
tance / more relaxed. If no connection it will display “OPEN” and if short circuit it will
display “SHOT”. Intensity bar corresponds to percentage value, more bars is high
and less bars is low.
21% resistance When nothing is attached
between the electrodes
After program has started, it may take a little while (up to 15 seconds) for test voltage
to settle and the reading to become correct.
You mu t witch off the unit manually a there i no timer control in Biofeedback
mode.

14
TEMP (Temerature)
Switch ON/OFF switch to ON position.
Press POWER and scroll with the UP/DOWN buttons to select TEMP
Press SELECT to confirm this. The LCD display will be shown as below.
Once SELECT has been pressed the default temperate will read in Celsius on the
right and Fahrenheit on the left.
The Temperature gauge will work between –10° and 50°C.
Please note that the temperature may show a slightly higher value due to the
warming up of the circuitry inside the BT Pro case.
The ower control will need to be switched off manually as the tem erature
gauge is not controlled by the timer.

15
EYEM (Eyemate)
Sit or lie in a relaxed environment and fit the Eye electrodes to your eyes. Use the Velcro strap
to adjust it so it sits firmly over the eyes and head. The electrodes should sit gently against the
skin around each eye. The pinholes in the mask allows you to see through the mask.
Switch ON/OFF switch to ON position (8).
Press POWER (11) and scroll with the UP/DOWN buttons to select EYEM
Press SELECT to begin this program. There is no need to select a time for this program as all
frequencies are preset with specific timeframes.
Each frequency will operate without repeating. The unit will beep twice and power off indicating
the end of the program. This program is timed at 10 minutes total.
Frequency sequence (Hz):
5, 292, 292.7, 30, 30.7, 9.1, 9.8, 0.3, 10, 0.7, 14, 1.5, 3.6, 95, 137, 18, 1.5, 3.6, 137, 1Hz
The program will begin with the intensity fully down for safety reasons.
Press the UP (10) arrow to adjust the intensity level to a suitable and comfortable feeling.
The program will end with 3 short ‘beeps’ and power off.

16
MAGN: (Magna tim)
Magnastim frequencies include: 0.5, 1, 3, 5, 7.83, 10, 10.2, 20, 528Hz. It outputs bi-polarity
equal pulse width square waveform. Timer selections are from 5 to 100 minutes. Frequency and
timer selection are the same as BT+.
Plea e note—The Head et ARE NOT headphone , they are magnetic electrode which
emit frequencie . There is no sound that is emitted from these.
FREQUENCIES:
20 Hz
Depression Using CES
Beta: outward awareness,
Important :
U ing CES Cranial electro tim/Ear clip no more than 20min per day
10.2 Hz
Depression Using CES
Chakra Frequencies, Pancreas, Liver, Stomach, all Bladder, 9.8 - 10.2 Hz
Nervous System, Islets of Langerhans, Dopamine: 10.2Hz
Norepinephrin / Epinephrine: 10.0Hz,
10.2Hz Healing of body, mind/body unity,
Important :
U ing CES Cranial electro tim/Ear clip no more than 20min per day
Cranial Electromagnetic Field to Start 1 min on 5 min off max 5 min AC Pul e
function only.
7.83 Hz
Alpha / Theta, "Schumann Resonance.": One of the main resonance frequencies of the Earth.
Has a good reputation for: grounding, anti-jetlag, anti-mind control, improved stress tolerance.
Pituitary stimulation to release growth hormone (helps develop muscle, recover from injuries,
rejuvenation effects). 'Leaves you feeling revitalized like you've spent a day
‘In the country.' Reports of accelerated healing/enhanced learning - "the earth's natural brain-
wave”
Important :
U ing CES Cranial electro tim/Ear clip no more than 20min per day
Cranial Electromagnetic Field to Start 1 min on 5 min off max 5 min AC Pul e func-
tion only.
5.00 Hz
5Hz -Increased DNA synthesis; cellular signalling; repair and healing
Lymph drainage (micro-muscular movement), best at .5Hz
In the Palaces of Memory they suggest 5 Hz as being the optimum learning frequency. Even
as you read these words, a tiny portion of your brain is physically changing. New connections
are being sprouted -- a circuit that will create a stab of recognition if you encounter the words
again... Read: In the Palaces of Memory
Endorphin: 5Hz, Problem solving
Important :
U ing CES Cranial electro tim/Ear clip no more than 20min per day
Cranial Electromagnetic Field to Start 1 min on 5 min off max 5 min AC Pul e func-
tion only.

17
Fig 16
1.00 Hz
Sleep
When used with CEF is reported to help with depression
This frequency can lead you to an "altered state of conscience" favourable to a deep sleep
Important :
U ing CES Cranial electro tim/Ear clip no more than 20min per day
Cranial Electromagnetic Field to Start 1 min on 5 min off max 5 min AC Pul e function
only.
0.5 Hz
To support the reduction of panic attacks, stress, anxiety and to help promote Fast Relaxation,
Sleep
Important :
U ing CES Cranial electro tim/Ear clip no more than 20min per day
Cranial Electromagnetic Field to Start 1 min on 5 min off max 5 min AC Pul e function
only.
3 Hz
TENS frequency which can also assist with Pain.
Important :
U ing CES Cranial electro tim/Ear clip no more than 20min per day
Cranial Electromagnetic Field to Start 1 min on 5 min off max 5 min AC Pul e function
only.
10 Hz
A very popular DNA repair program
Important :
U ing CES Cranial electro tim/Ear clip no more than 20min per day
Cranial Electromagnetic Field to Start 1 min on 5 min off max 5 min AC Pul e function
only.
PLEASE NOTE:
Do not combine The Magnastim CEF Headset with other mind machines in real-time. Light and
sound devices (that use binaural beats or flashing lights), CES (Cranial Electromagnetic Stimu-
lation), TENS (transcutaneous [through the skin] electrical nerve stimulation) devices adapted
for neural use, common magnets held in place with a headband, and crystals driven by electric-
ity of any kind are only some of the many 'mind machines'. Negative effects have been reported
from the simultaneous use of Magnastim with other mind machines. However, when they are
used about two hours AFTER a Magnastim session, their effects can be amplified.
Frequencie cont.

18
To Set up:
Insert stereo patch lead into the output (2) of the BT Pro LCD unit.
Insert the other end into the input of the blue TMS device.
Insert the Magnastim Headset into the “Headset” output on the blue TMS device.
Plug the 12 volt power supply into the blue TMS and plug into mains power to operate.
BE SURE TO USE ONLY THE POWER SUPPLY THAT CAME WITH EACH DEVICE!
Do not mix the power supplies up as some devices require different voltage power.
The TMS device acts as an amplifier that sends the frequencies to the Headset electrodes.
Please note that these are not headphones. A magnetic frequency is emitted from the
electrodes.
Sit or lie in a comfortable position and fit the headset over your ears.
Select the desired TIME by scrolling up/down, press SELECT to program this.
Select the desired frequency by scrolling up/down, press SELECT to program this.
Turn the intensity up to half or 3/4 (50%-75%).
The unit will switch off automatically after the timer has counted down.
Magnastim Headset
Stereo Patch Cable
12volt Power Charger

19
CHBL: (Chakra Balance)
This is a user friendly program and very easy to operate.
No physical connection to the body is required.
Your body simply receives frequencies being generated by the Magnacoil which sits under or
next to the body. This is a great relaxing and balancing frequency range for our 7 main
Chakra areas.
Chakra Balance will run 7 programs / frequencies in cycle of 3 minutes for each frequency.
This keeps rotating continuously until manually switched off.
Outputs equal pulse width bi-polarity square waveform.
The Seven Chakra Frequencies are:
1, Root / Muladhara 194.18 Hz
2, Sacral / Svadhisthana 210.42 Hz
3, Solar Plexus / Manipura 126.22 Hz
4, Heart / Anahata 136.10 Hz
5, Throat / Vishuddha 141.27 Hz
6, Third Eye / Ajna 221.23 Hz
7, Crown / Sahasrara 172.06 Hz

20
To Set up:
Insert stereo patch lead into the output (2) of the BT Pro LCD unit.
Insert the other end into the input of the black TMS device.
Insert the Magnacoil into the “Coil” output on the black TMS device.
Plug the 24 volt power supply into the black TMS and plug into mains power to operate.
BE SURE TO USE ONLY THE POWER SUPPLY THAT CAME WITH EACH DEVICE!
Do not mix the power supplies up as some devices require different voltage power.
The TMS device acts as an amplifier that sends the frequencies to the Magnacoil.
A magnetic frequency is emitted from the Magnacoil.
Sit or lie in a comfortable position and place the Magnacoil next to you or on top or underneath
your body.
The TIME is fixed to 3 minutes for each frequency.
You can run each frequency continuously by pressing SELECT while that frequency is running.
This pauses the 3 minute timer but allows the frequency to continue from the output until
SELECT is pressed again.
Turn the intensity up to 3/4 or full (75%-100%).
Becau e no timer i et for thi function, you will need to manually witch the unit off
24volt Charger
Cable from Magnacoil
MAGNACO L
Stereo patch cable