Altimium MAT.HDMI88-4K User manual

MAT.HDMI88-4K
4K 8x8 HDMI Matrix Switcher
All Rights Reserved
Version: MAT.HDMI88-4K_2016V1.0
User Manual

4K 8x8 HDMI Matrix Switcher
Altimium www.altimium.com
Preface
Read this user manual carefully before using this product. Pictures shown in this manual
are for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till December 2016. Any changes of
functions and parameters since then will be informed separately. Please refer to the
dealers for the latest details.
All product function is valid till 2016-12-5
Trademarks
Product model and logo are trademarks.Any other trademarks mentioned in this manual
are acknowledged as the properties of the trademark owner. No part of this publication
may be copied or reproduced without prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

4K 8x8 HDMI Matrix Switcher
Altimium www.altimium.com
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

4K 8x8 HDMI Matrix Switcher
Altimium www.altimium.com
Contents
1. Introduction.................................................................................................................1
1.1 Introduction to the MAT.HDMI88-4K ..................................................................1
1.2 Features ............................................................................................................1
1.3 Package List......................................................................................................1
2. Product Appearance ...................................................................................................2
3. System Connection.....................................................................................................3
3.1 Usage Precautions............................................................................................3
3.2 Connection Diagram..........................................................................................3
3.3 Connection Procedure.......................................................................................3
3.4 System Applications ..........................................................................................4
4. System Operations.....................................................................................................5
4.1 IR Control ..........................................................................................................5
4.2 RS232 Control...................................................................................................5
4.2.1 Installation/uninstallation of RS232 Control Software..............................5
4.2.2 Basic Settings..........................................................................................5
4.2.3 RS232 Communication Commands ........................................................6
4.2.4 EDID Management................................................................................11
4.2.4.1 Via RS232 commands.................................................................11
4.2.4.2 Via 4-pin EDID DIP switcher........................................................12
4.3 TCP/IP Control.................................................................................................13
4.3.1 Control Modes.......................................................................................13
4.3.2 Control MAT.HDMI88-4K via TCP/IP communication software..............14
4.3.3 Control MAT.HDMI88-4K via web-based GUI........................................16
4.3.3.1 Scene Menu................................................................................16
4.3.3.2 Control Menu...............................................................................17
4.3.3.3 Configuration Properties..............................................................18
4.3.4 TCP/IP Configuration.............................................................................22
4.3.5 GUI Update............................................................................................22
4.4 Firmware Upgrade through USB port..............................................................23
5. Specification .............................................................................................................25

4K 8x8 HDMI Matrix Switcher
Altimium www.altimium.com
5.1 Supported Resolution......................................................................................25
6. Panel Drawing ..........................................................................................................26
7. Troubleshooting & Maintenance ...............................................................................27
8. After-sales Service....................................................................................................29

4K 8x8 HDMI Matrix Switcher
Altimium 1www.altimium.com
1. Introduction
1.1 Introduction to the MAT.HDMI88-4K
MAT.HDMI88-4K is a professional 8x8 HDMI Matrix Switcher that features receiving up
to 8 HDMI2.0& HDCP2.2 compliant signal and output 8 HDMI1.4& HDCP1.4 compliant
signal. It provides 8 auxiliary audio ports for de-embedded HDMI audio output. It also
boasts powerful EDID management to ensure reliable AV distribution and routing.
The unit is controllable via front panel buttons, IR, RS232, or TCP/IP (optional).
1.2 Features
8x8 HDMI matrix with 8 de-embedded HDMI audio ports;
HDMI input ports: support HDMI 2.0, support signal up to 4Kx2K@60Hz & 1080p 3D,
compliant with lower HDMI standards; HDCP2.2 compatible;
HDMI output ports: support HDMI 1.4, capable to transmit 2560x1080 (60Hz) signal,
compliant with lower HDMI standards; HDCP1.4 compatible;
Transmit 4Kx2K@60Hz signal up to 15m;
SPDIF ports for de-embedded HDMI audio output;
Powerful EDID management;
Controllable via front panel button, IR, RS232& optional TCP/IP;
LCD screen shows real-time I/O connection status;
Convenient firmware upgrade through Micro USB port;
Easy installation with rack-mounting design.
1.3 Package List

1 x MAT.HDMI88-4K

2 x Mounting ears

6 x Screws
1 x IR receiver
1 x Power cord(Optional)

1 x Pluggable Terminal Block
1 x Power adaptor(DC 24V/2.71A)
4 x Plastic cushions

1 x IR remote

1 x User manual
Confirm if the product and the accessories are all included, if not, please contact
with the dealers.

4K 8x8 HDMI Matrix Switcher
Altimium 2www.altimium.com
2. Product Appearance
Figure 2- 1 Product Appearance
No. Name Description
①Power
Indicator
Illuminate red when power on;
Turn green in standby mode;
Blink red when upgrading.
②LCD Screen Display real-time operation status.
③OUTPUTS Output selection buttons, press the buttons to switch input
cyclely for the output
④Power Trigger Press to power on/off the switcher
⑤Control
TCP/IP: (optional) TCP/IP port for unit control
IR IN:
input port for IR control signal, connect with IR receiver
RS232: Serial control port, connect with control device
EDID Switcher: 4-pin EDID DIP switchers to set EDID data,
“1” stands for “On”, “0” stands for “Off”. Refer to 4.4 EDID
Management for more detials.
Firmware
: Micro USB port for firmware upgrade
⑥INPUTS HDMI input ports, 8 in total, connect with HDMI sources
⑦OUTPUTS SPDIF: audio output ports for de-embeded HDMI audio, 8
in total
HDMI: 8 in total, connect with HDMI displays
⑧DC 24V Connect with DC 24V power adaptor
⑨Ground Connect to ground
SYSTEM MONITOR
POWER
1 2 345678
OUTPUTS
MAT.HDMI88-4K
①②③④
⑥⑦ ⑧⑨

4K 8x8 HDMI Matrix Switcher
Altimium 3www.altimium.com
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment with prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated.
3) All devices should be connected before power on.
3.2 Connection Diagram
Figure 3- 1 Connection diagram
3.3 Connection Procedure
Step1.Connect HDMI sources (e.g. DVD) to HDMI INPUTs with HDMI2.0 cables.
Step2.Connect HDMI displays (e.g. HDTV) to HDMI OUTPUTs with HDMI cables;
Step3.Connect speakers/ amplifiers to the AUDIO OUTPUTs with audio cables;
Step4.Connect the RS232 ports of control device (e.g. a PC) and MAT.HDMI88-4K to
enable serial control;
PC
DVD
Laptop
HDTV
Speaker 1
Speaker 2
HDTV

4K 8x8 HDMI Matrix Switcher
Altimium 4www.altimium.com
Step5.Connect the TCP/IP ports of control device (e.g. a PC) and MAT.HDMI88-4K to
enable IP control;
Step6.Insert an IR receiver to the IR IN port to enable IR control;
Step7.Plug a DC 24V power adapter to the power port of MAT.HDMI88-4K.

1) When connecting to HDMI2.0 sources, make sure the HDMI cable is compliant with
HDMI2.0 to ensure reliable transmission;
2) Connect amplifiers that are capable to decode HDMI audio to the SPDIF ports, or
there will be no output on the amplifiers.
3.4 System Applications
As its good performance in control and transmission, the MAT.HDMI88-4K can be widely
used in computer realm, monitoring, large screen displaying, conference system,
television education and bank securities institutions etc.

4K 8x8 HDMI Matrix Switcher
Altimium 5www.altimium.com
4. System Operations
4.1 IR Control
Connect an IR receiver to the IR IN port of the switcher, users can control it through the
included IR remote. Here is a brief introduction to the IR remote:
Figure 4-1 IR Remote
①Standby: Enter/ exit standby mode
②INPUTS: Buttons for input selection
③OUTPUTS: Buttons for output selection
I/O Switch Format: INPUT + OUTPUT
4.2 RS232 Control
4.2.1 Installation/uninstallation of RS232 Control Software
Installation Copy the control software file to the computer connected with
MAT.HDMI88-4K.
Uninstallation Delete all the control software files in corresponding file path.
4.2.2 Basic Settings
Firstly, connect MAT.HDMI88-4K with necessary input devices and output devices. Then,
connect it with a PC installed RS232 control software. Double-click the software icon to
run this software.
Here we take the software CommWatch.exe as example. The icon is showed as below: