Amart Furniture 62097 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
CALI STOOL
ITEM CODE 62097
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084
1ITEM CODE 62097

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 62097

3 ITEM CODE 62097
4*10

4ITEM CODE 62097
Step 1
Insert legs (B) into the side slots of base (C).
Step 2
Join (B) and (C)with bolt (E), (F) and nut (L) with spanner (K)
!
Pay attention to the sides of the legs.
The side with wood grain print faces of part (C)
upwards.

5ITEM CODE 62097
Test the alignment of the 4 legs and gently stretch the pair of
legs that touch the ground outwards to match the rest.
!
Match the "FRONT" of base (C)
and secure stretcher (D)

6ITEM CODE 62097

7ITEM CODE 62097
Care and maintenance
Regular Care:
· Always protect your product from direct sunlight, direct heat, and
weather. Vacuum regularly using a low suction setting.
Cleaning:
· Do not remove cushion covers for separate cleaning even though they
may have zips. Do not wash. Do not dry clean. Do not use dishwashing
or laundry detergents or solvents. Do not wet the internal filling.
· It is recommended that cleaning be done with a hot water extraction
machine only by a professional cleaner.
Spot cleaning:
· Do not rub or scrub. Do not spot clean with any solvent.
· Treat spills and stains as soon as possible.
· Gently scrape any soil or mop and liquid from the surface of the fabric.
· Apply proprietary cleaning agents to the residue of the spill, strictly
according to the manufacturer’s instructions.
· Do not saturate the fabric or interior filling with water or other
cleaning
liquids.
Important note:
· Apply only water-based soil resistant (fabric protection) treatments.
· Do not use aerosol fabric protection products.
· Clean timber legs with a clean, soft cloth dampened with water.
Do not:
· Use chair/stool as a ladder
· Climb on the chair/stool
· Stand on the foot-rest of the chair, as this could lead to the stool
becoming unbalanced and overturning