Amart Furniture ARGENTO 63847 User manual

ASSEMBLY INSTRUCTION
2200mm
450mm
860mm
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
163847
ARGENTO 4 DOORS 2 DRAWERS BUFFET
ITEM CODE 63847

2
suitable
and sudden
63847

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
63847
3

463847
8 pcs
NO. HARDWARE LIST QT'Y
AAdhesive felt pad
20x20x5
A(X8)
STEP 1:
With two people carefully lay the Buffet on to a sheet or piece of cardboard.
Attach adhesive felt pad (A) onto the legs.
With two people carefully stand the Buffet upright.

Take out handle from drawer, use
screwdriver removing the bolts. Attach handle in front of drawers,
on the drilling hole position by using
screwdriver to tighten bolts up.
63847
NOTE: Detach and reattach handle for door
the same as drawer.
WALL
Fixing the strap to the wall
As the wall materials vary,
screws for fixing to the wall
are not included.
For advice on suitable screws
systems, contact your local
specialised dealer.
STEP 2: Attach the handle
5

ASSEMBLY IS COMPLETE
63847
WALL
6