Amart Furniture RICARDO 62499 User manual

ITEM CODE : 62499
1 62499
ASSEMBLY INSTRUCTION
RICARDO DESK
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.For
assistance with assemblyor for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084

2 62499
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
12
11 1
2
10
8
7
4
5
9 3
6
X2
ADDITIONAL TOOLS REQUIRED (not include)
ALLOW 30 MINUTES 2 PEOPLE REQUIRED

3
PART LIST
HARDWARE LIST
8 PCS
B. JCBC BOLT (M6x50MM)
2 PCS 10 PC
A. JCBC BOLT (M8x50MM) C. FLAT WASHER (M8/Ø16MM)
1 PC4 PCS 2 PCS
F. ALLEN KEY M4
D. SCREW (M4x50MM) E. WOODEN DOWEL (M8x30MM)
3
4
BACK RIGHT LEG
1TOP FRAME (X1)
7
6 (X2)
(X1)
FRONT LEFT LEG
SIDE CROSS BAR
2 BACK LEFT LEG (X1)
5FRONT RIGHT LEG
BACK CROSS BAR
1200x600x167mm
753x60x60mm
460x40x20mm
1040x40x20mm
(X1)
(X1)
(X1)
753x60x60mm
753x60x60mm
753x60x60mm
1
2
4
6
7
5
3
6
62499
4 PCS
G. ADHESIVE FELT PAD
(20X20X5MM)

4
STEP 1
Attach 6onto 3, 5 by using Screw (D),
tighten it up by using an Screwdriver (not include)
D(X2)
3
5
6
STEP 2
Attach 6onto 2, 4 by using Screw (D),
tighten it up by using an Screwdriver (not include)
6
4
2
STEP 3
Attach 7onto 2, 3 by using Bolt (B)
and flat washer (C), tighten it up by
using an Allen Key (F).
D(X2)
3
5
2
4
7
Attach Dowels (E) into 7.
B(X2)
F
E(X2)
C(X2)
62499

5
5
4
3
2
1
C(X8)
A(X8)
F
STEP 4
Attach 2, 3, 4, 5 onto 1 by using Bolt (A) and flat washer (C),
tighten it up by using an Allen Key (F).
62499
WALL
Fixing the strap to the wall
- As the wall material vary, screws for fixing
to the wall are not included.
- For advice on suitable screws systems,
contact your local spacialised dealer.
G(X4)
Attach adhesive felt pad (G) onto the legs

6
ASSEMBLY IS COMPLETE
62499
Wall

suitable
and sudden