Amart Furniture KATIE 53267 User manual

ASSEMBLY INSTRUCTION
KATIE DOUBLE BED
ITEM CODE - 53267
Imported by Amart Furniture Pty Ltd,Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Freecall 1800 351 084.
Imported by Amart Furniture Pty Ltd,Qld, Brisbane Australia. For any assistance with
assembly or for missing parts please phone Amart Furnitue, Customer Service
Freecall 1800 351 084.
1448mm
2070mm
1035mm
1 53267
Furniture

PRE-ASSEMBLY PREPARATION
2 53267
BEFORE YOU START....
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
2. Check and ensure that you have all required contents for complete assembly.
3. Always read the assembly instructions carefully before beginning assembly.
4. The packaging and contents can be a choking hazard, therefore keep out of reach
of small children at all items.
5. Do not over tighten the bolts as this may damage the thread.
ALLOW 45 MINUTES 2 PEOPLE REQUIRED
ADDITIONAL TOOLS REQUIRED

PARTS LIST
3 53267
HEAD FRAME
FOOT FRAME
HEAD FRAME WOOD LEG
FOOT FRAME WOOD LEG
SIDE RAIL
CROSS BAR
CENTER RAIL
1
2
3
4
5
6
7
7
5
5
1
3
3
6
88
2
94
4
Bolt M6 x 15mm
A x 8pcs
Bolt M6 x 30mm
B x 2cs
Bolt M6 x 100mm+Nut
C x 8pcs
Bolt M8 x 25mm
D x 12pcs
Bolt M8 x 40mm
E x 3pcs
Wood Dowel M8 x 30mm
F x 8pcs
Screw M4 x 32mm
G x 8pcs
Allen Key M6
H x 1pc
Allen Key M8
I x 1pc
6
1 pc
1 pc
2 pcs
2 pcs
2 pcs
2 pcs
1 pc
* NOTE :
- ITEMS E BOLTS IS ASSEMBLE AT SUPPORT LEGS, NOT IN HARDWARE
PACKS.
SUPPORT LEGS
- 18mm x 59mm x 1370mm
8
9
WOODEN SLATS 12 pcs
3 pcs

4 53267
HEAD FRAME
Back View
Back View
F
1
C
2F
C
3
C
C
4
STEP 1: Assemble all head frame component parts with hardware as shown.
FOOT FRAME
Back View
F
STEP 2: Assemble all foot frame component parts with hardware as shown.
F
F
H
H
H
F

5 63267
A
5A
6
5
STEP 4 : Attach cross bars (6) to side rails (5) at head end with bolts (A) as shown in diagram. Repeat
at foot end. Tighten all bolts with Allen key (H) & (I) by turning clockwise.
D
D
D
5
5
STEP 3: Attach side rail (5) to head frame and foot frame with bolts (D) using Allen key (I).
Importent Note : Do not tighten the bolts yet!
I

6 53267
STEP 6: Attach support legs (9) to center rail with bolts (E) using Allen key (I)
as shown.
9
E
7
I
CAUTION:
ALWAYS LIFT YOUR BED WHEN MOVING/RELOCATING - DO NOT DRAG.
DRAGGING CAN CAUSE THE CENTRE SUPPORT LEGS TO BEND/BREAK.
E
9
99
E
E
7
6
B
STEP 5 : Fix center rail (7) to cross bars (6) with bolts (B) using Allen key (H)
as shown below.
H

7 53267
8
8
STEP 7: Insert wooden slats (8) into the side rail support and affix with screws (G) at hole
as shown below.
G
ASSEMBLY IS COMPLETE
IMPORTANT NOTE:
ALWAYS LIFT YOUR BED WHEN MOVING/RELOCATING - DO NOT DRAG.
DRAGGING CAN CAUSE THE CENTER SUPPORT LEGS TO BEND/BREAK.

8 53267
Product Care for Hi-Gloss Items
Hi-gloss lacquered furniture is more sensitive to marks and scratching then some other furniture
products. It is important to exercise caution and care to maximise the life and beauty of
this product.
Following the below simple guidelines when using your hi-gloss product will protect your
investment for years to come.
.Dust frequently with a clean damp lint-free cloth. This will help remove
abrasive build up which can damage a finish over time.
.Do not place hot objects on any furniture surface. Always use a hot plate or
placement. Laminate and lacquer finishes on table tops provide added scratch
and heat resistance to our furniture, but they can still be damaged without
proper care.
.Avoid exposing your furniture to strong sunlight, heat outlet, open windows or
dampness. Prolonged exposure to direct sunlight can fade the finish of your
furniture, while extreme temperature and humidity changes can cause
cracking or splitting.
.Do not expose your furniture to any liquids. Never allow water to sit on your
furniture. Alcohol, nail polish and perfume are also dangerous as they will
dissolve the lacquer finish on contact and may require professional repairs.
.Do not allow plastic to come in direct contact with your furniture. Chemicals in
the plastic of placements etc may soften and mark the finish if left in contact
with the furniture for a period of time.
.Avoid placing sharp or rough objects on the surface of your furniture. These
may scratch the surface of the product.
.When moving your furniture, do not drag it across the floor. This may damage
the product. Instead use two (2) people to lift carefully from either end.